Dynacord PowerMate 1600 - Manuals

32 33 INPUT MONO 1. MIC Electronically balanced XLR-type inputs for the connection of low impedance microphones like the ones featured in major studio and live mixing consoles. This type of input stage provides extraordinary low noise signal conversion at an extremely low distortion rate (typical &l...

38 39 INPUT STEREO Since most features – AUX faders, controls and channel faders – of the STEREO INPUTS are virtually identical to the ones of the MONO INPUTS we will not discuss their functioning in detail again. Thus, in the following we only point out the differences and like to ask you to refer ...

44 45 42. AUX3/4 VOLUMEThis fader controls the summed audio signal at the AUX3/4 SEND output. When used for monitoring, this fader lets you control the volume of the monitor system. 43. 7-BAND EQUALIZER Left and right master channels employ a 7-band equalizer, which gets activated through the use of...

48 49 SPEAKER OUTPUTS RIGHT / LEFT The PowerMate is equipped with professional SPEAKON high-performance connectors, offering electrical and mechanical secure connection, which complies to all security regulations. It also allows the use of high quality speaker cables with diameters of 4 x 2.5mm2. Th...

50 51 Cabling The mains supply cord comes with the PowerMate. The quality of all other cables lies in your responsibility. Carefully chosen high quality cables are the best precaution to prevent later problems during live operation. The following wiring alternatives are recommended to provide troubl...

54 55 The patch field within the master section is referred to as MASTER PATCHBAYThe mixer’s Line output levels, return and insert connections are to be found here. To provide you with a wide range of connection possibilities, the MASTER INSERTS, MAIN OUTPUTS, EQ INPUTS and EQ OUTPUTS, POWER AMP INP...

56 57 SPECIFICATIONS Technical Specifications PowerMate1000/PowerMate1600 Mixing desk in rated condition, Unity Gain ( MIC Gain 20 dB ), all faders position 0 dB, all pots in mid position, master fader + 6dB, amplifier rated output power into 8 ohms, dual channel, unless otherwise specified. Maximum...