Dynacord CL 1200 - Manuals - manualsarea.com

Page 2 - CONTENTS

CONTENTS IMPORTANT SAFETY INSTRUCTIONS ....................... 3 IMPORTANT SERVICE INSTRUCTIONS ....................... 3 DESCRIPTION ....................... 4 UNPACKING & WARRANTY ....................... 5 INSTALLATION NOTES ....................... 5 FRONT VIEW ....................... 6 REAR VI...

Page 3 - SAFETY COMPONENT ( MUST BE REPLACED BY ORIGINAL PART ); IMPORTANT SERVICE INSTRUCTIONS

3 The lightning fl ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage“ within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons. The exclamation point w...

Page 4 - DESCRIPTION

Congratulations! With buying a DYNACORD CL-SERIES power amplifi er you have chosen an appli- ance that employs most advanced technology. CL-Series power amps combine outstanding audio performance, highest reliability and operational safety. The audio performance of CL power amps are simply extraordi...

Page 5 - INSTALLATION NOTES

UNPACKING & WARRANTY Carefully open the packaging and take out the power amplifi er. Next to the power amplifi er itself, the package also includes this owner’s manual, a mains cord and the warranty certifi cate. Keep the original invoice, which states the purchase/delivery date together with th...

Page 6 - FRONT PANEL

FRONT PANEL POWER-indicator not lighting are: the appliance is not connected to the mains or the primary fuse is defective. The PROTECT LED indicating that one of the internal protection circuits against thermal overload, short-circuit, Back-EMF, RF-occurrence at the output, etc., has been activated...

Page 7 - type connector pin-assignment; PARALLEL; REAR PANEL; power amplifi er and/or the connected speaker cabinets.

INPUT A / INPUT B NF-CONNECTION CORDS Choosing high-quality balanced cables (two conductors for the audio signal plus seperate shielding mesh) with XLR-type connectors are recommended for LF-signal connection. Although connecting un- balanced cables to the power amplifi er inputs is possible as well...

Page 8 - POWER AMP OUTPUT CONNECTORS

REAR PANEL Power amp output connection for the two channels A (left) and B (right) is provided via SPEAKON-type output connectors. A plastic cover to prevent inadvertent erroneous connection protects the BRIDGED OUT connector. Make sure to remove the cover only when actually operating the power ampl...

Page 9 - MAINS OPERATION & RESULTING TEMPERATURE

MAINS OPERATION & RESULTING TEMPERATURE MAINS OPERATION & RESULTING TEMPERATURE The following tables allow determining power supply and cabling requirements. The power drawn from the mains network is converted into output power to feed the connected loudspeaker systems and into heat. The dif...

Page 11 - SPECIFICATIONS

SPECIFICATIONS 31 CL800 CL1200 CL1600 CL2000 Load Impedance 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω Max. Midband Output Power THD = 1%, 1kHz , Dual Channel 600W 400W 240W 900W 600W 350W 1100W 800W 500W 1500W 1000W 600W Rated Output Power THD < 0,1%, 20Hz … 20kHz --- 300W 150W --- 500W 250...

Page 12 - BLOCK DIAGRAM

Page 13 - ABMESSUNGEN / DIMENSIONS

ABMESSUNGEN / DIMENSIONS ABMESSUNGEN / DIMENSIONS (in mm) 33

Page 14 - NOTES