Dukane 8755B - Manuals

STANDBY/ON INPUT KEYSTONE RESET LANP TENP POWER 4 PART NAMES THE PROJECTOR Zoom ring 15 Focus ring 15 Air filter 27 Elevator button 6 Elevator button 6 KEYSTONE button 20 STANDBY/ON button 14 INPUT button 15 RESET button 24 STA NDB Y/O N INPUT KEY STO NE RESET LANP TENP POWER MENU button 23 LAMP ind...

5 ENGLISH THE REMOTE CONTROL STANDBY/ON button 14 VIDEO button 15 MENU button 23 RGB button 15 BLANK button 22 SEARCH button 22 VOLUME button 17 MUTE button 17 KEYSTONE button 20 ASPECT button 22 AUTO button 19 MAGNIFY buttons 21 KEYBOARD buttons 24 FREEZE button 21 POSITION button 18 ESC button 23 ...

6 Adjusting the Projector's Elevator Feet 1 P r e s s a n d h o l d i n t h e e l e v a t o rbuttons 2 Raise or lower the projector to thedesired height and then release theelevator buttons When you release the elevator buttons, the elevatorfeet will lock into position. 3 As necessary, you can also ...

7 ENGLISH Refer to the illustrations and tables below to determine the screen size andprojection distance. Adjusting the Screen Size and Projection Distance Top view a c b Lens center The screen Side view Top view a c b Lens center The screen Side view If 4:3 aspect ratio If 16:9 aspect ratio 4 3 9 ...

8 Display monitors 12 DVD players 11 VCRs 11 Laptop computers 10 Desktop computers 10 Indicates thecorrespondingreference page ATTENTION Precautions to observe when connecting other devices to the projector • Whenever attempting to connect other devices to the projector, please thoroughly read the m...

9 ENGLISH Ports and Cables Refer to the table below to find out which projector port and cable to use for connecting agiven device. Use this table for determining which cables to prepare. About Plug-and-Play Capability • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved ...

10 B A AUDIO IN R L / (MONO) VIDEO IN K S-VIDEO IN USB 1 RGB IN 2 RGB OUT CONTROL A AUDIO IN 2 AUDIO cable RGB cable AUDIO OUT RGB IN Analogue RGB OUT AUDIO IN AUDIO OUT 1 2 B Laptop computer USB AUDIO IN AUDIO OUT 1 2 B A D C AUDIO IN R L / (MONO) VIDEO IN K S-VIDEO IN 1 RGB IN 2 RGB OUT CONTROL A ...

11 ENGLISH A B If using an audio/video connection AUDIO IN R L / (MONO) VIDEO IN K S-VIDEO IN 1 RGB IN 2 RGB OUT CONTROL A A A B AUDIO/VIDEO IN AUDIO/VIDEO OUT S-VIDEO IN S-VIDEO OUT If using a S-video connection AUDIO/VIDEO cable S-VIDEO cable USB AUDIO IN AUDIO OUT 1 2 DVD player B If using a S-vi...

12 RGB cable A AUDIO IN R L / (MONO) VIDEO IN K S-VIDEO IN 1 RGB IN 2 RGB OUT CONTROL A RGB OUT RGB IN USB AUDIO IN AUDIO OUT 1 2 CONNECTING YOUR DEVICES (continued) Connecting to a Display Monitor Display monitor 01ED-S317-27/Vol1/E/初    02.12.17  8:57  AM    ページ 12

13 ENGLISH 1 Remove the batterycover Slide back and removethe battery cover in thedirection of the arrow. Insert the batteries Align and insert the two AAbatteries (that came with theprojector) according to their plusand minus terminals (as indicated in the remote control). Close the batterycover Re...

14 STANDBY/ON INPUT KEYSTONE RESET LANP TENP POWER 1 Make sure that the power cord is firmly andcorrectly connected to the projector and outlet 2 Turn on the projector's power Set the power switch to [ | ] (ON). The projector will goto STANDBY mode and the POWER indicator will light tosolid orange. ...

RGB 15 ENGLISH 6 Use the zoom ring to adjust thescreen size 7 Use the focus ring to focus thepicture 5 If selecting RGB inputPress the RGB button Press this button to toggle between thedevices connected to RGB IN 1 and 2.As illustrated below, each time youpress the RGB button, the projectorswitches ...

16 VIDEO ASPECT HOME END MUTE PAGE DOWN KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET PAGE UP VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the STANDBY/ON button (controlpanel or remote control) The message "Power off?" will appear on the screen for approximately 5 seconds. ...

17 ENGLISH VIDEO ASPECT HOME END MUTE PAGE DOWN KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET PAGE UP VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the VOLUME button As illustrated on the right, a dialog willappear on the screen to aid you in adjustingthe volume. 1 Press the MUTE bu...

18 VIDEO ASPECT HOME END MUTE PAGE DOWN KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET PAGE UP VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the POSITION button As illustrated on the right, a dialog will appear on the screento aid you in adjusting the position. 2 Use the , , , button...

19 ENGLISH The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals. NOTE 1 USING THE AUTOMATIC ADJUSTMENT FEATURE Press the AUTO button Horizontal position (H. POSIT), vertical position (V.POSIT), clock phase ...

20 • This function may not be work well with some types of input signals.• The adjustable range for correcting keystone distortions will vary with the type of input signal. NOTE CORRECTING KEYSTONE DISTORTIONS 1 Press the KEYSTONE button As illustrated on the right, a dialog will appearon the screen...

21 ENGLISH The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state. NOTE • The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ...

22 SIGNAL SEARCHING SELECTING THE ASPECT RATIO TEMPORARILY BLANKING THE SCREEN 1 Press the SEARCH button When you press the SEARCH button, the projector beginssearching for input signals. If it detects an input signal, thesearch will cease and the projector will project the detectedsignal. If the pr...

23 ENGLISH USING THE MENU FUNCTIONS 1 Press the MENU button The menu display appears on the screen. Theprojector has the following menus: MAIN,PICTURE-1, PICTURE-2, INPUT, SCREEN, andOPTION. Select a menu using the / buttons. The current settings of the items that can be manipulated via theselected ...

24 You can use the remote control as a simplified mouse or keyboard. OPERATING THE PC SCREEN CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment. • Only connect to a PC.• Before connecting, read the manuals of the device you will connect.• Do not unplug the connec...

25 ENGLISH THE LAMP HIGH VOLTAGEHIGH TEMPERATUREHIGH PRESSURE Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately:DT00521), then contact your local dealer. Before replacingthe lamp, turn off the power, and unplug the power cord, then wait at least 45 minu...

26 • The LAMP indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the LAMP indicator is still red, replace the lamp. NOTE THE LAMP (continued) Replacing the lamp All projector lam...

27 ENGLISH THE AIR FILTER Caring for the air filter The air filter should be cleaned about every 100 hours. If the LAMP indicator andTEMP indicator blink red simultaneously, or a message prompts you to clean the airfilter when you turn on the unit, the filter needs to be cleaned. (See "RelatedMe...

28 THE AIR FILTER (continued) Replacing the air filter If the soiling will not come off the air filter, or it becomes damaged, then it needs to bereplaced. Please contact your local dealer, after confirming the model of yourseparately sold replacement air filter. (See "Optional Parts" on Vol...

29 ENGLISH OTHER CARE Caring for the inside of the projector : In order to ensure the safe use of your projector, please have it cleaned and inspected byyour local dealer about once every 2 years. Never try to care for the inside of the unityourself. Doing so is dangerous. Caring for the lens : Ligh...

1 T E C H N I C A L T E C H N I C A L TECHNICAL SIGNAL CONNECTOR PIN ASSIGNMENT RGB IN [1]/[2]RGB OUT D-sub 15-pin Shrink Mini Din 4-pin S-VIDEO Mini Din 4-pin Pin No Signal 1 Color:0.286Vp-p (NTSC, burst signal),75 Ω terminator 0.3Vp-p (PAL/SECAM, burst signal),75 Ω terminator 2 Brightness:1.0Vp-p,...

2 Resolution H ×× V fH (kHz) fV (Hz) Rating Signal mode Display mode ED-S3170A ED-X3270A 720 × 400 37.9 85.0 VESA TEXT Zoom in Zoom in 640 × 480 31.5 59.9 VESA VGA (60Hz) Zoom in Zoom in 640 × 480 35.0 66.7 Mac13"mode Zoom in Zoom in 640 × 480 37.9 72.8 VESA VGA (72Hz) Zoom in Zoom in 640 × 480 ...

3 TECHNICAL The following signals are used for the initial settings.The signal timing of some computer models may be different. In such case, refer toadjust the V.POSIT and H.POSIT of the menu. DATA HSYNC DATA VSYNC Display interval c Back porch b Sync a Front porch d Display interval c Back porch b...

4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CONNECTION TO THE MOUSE CONTROL 1 2 3 4 1 2 3 4 + 5V —DATA + DATA GND + 5V —DATA + DATA GND 1 2 3 4 2 1 3 4 USB jack (B type) USB jack (A type) Projector USB cable Computer ADB Mouse 2 1 4 3 6 5 2 1 4 3 8 7 10 9 12 11 14 13 15 RTS GND +5V ADB GND +5V (POWER ON) ...

5 TECHNICAL (1) Turn off the projector and computer power supplies and connect with the RS-232C cable.(2) Turn on the computer power supply and after the computer has started up, turn on the projector power supply. Control jack D-sub 15-pin shrink jack 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RD TD GND S...

MAIN Menu Item Description BRIGHT Adjust Brightness: Light ⇔ Dark CONTRAST Adjust Contrast: Strong ⇔ Weak ASPECT Select Aspect Ratio: At RGB Input:4:3 ⇔ 16:9 At VIDEO Input, S-VIDEO Input:4:3 ⇔ 16:9 ⇔ SMALL • The SMALL picture may not be displayed correctly with certain input signals. PICT.POSIT. Se...

ENGLISH PICTURE 1 Menu PICTURE 2 Menu With the PICTURE 1 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance with the instructions in theTable. With the PICTURE 2 menu, the five items shown in the Tablebelow can be performed.Perform each operation in ac...

MULTIFUNCTIONAL SETTINGS (continued) INPUT Menu With the INPUT menu, the four items shown in the Table below can beperformed. With inputting of RGB IN 1 and RGB IN 2 signals, thehorizontal and vertical frequencies of the signals will be displayed on theinitial screen of the INPUT menu.Perform each o...

ENGLISH SCREEN Menu With the SCREEN menu, the five items shown in the Table below can be performed.Please perform each operation in accordance with the instructions in the Table. 5 SCREEN Menu Item Description BLANK Selection of BLANK Screen: MyScreen ⇔ ORIGINAL ⇔ . . ⇔ . . ⇔ . . The BLANK Screen ma...

MULTIFUNCTIONAL SETTINGS (continued) OPTION Menu With the OPTION menu, the five items shown in the Table belowcan be performed.Please perform each operation in accordance with the instructionsin the Table. MENU : SELECT MAINPICTURE-1PICTURE-2INPUTSCREENOPTION VOLUMEAUTO OFFWHISPERLAMP TIMEFILTER TIM...

ENGLISH WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED Related Messages When the unit's power is ON, messages such as those shown below may be displayed. Whenany such message is displayed on the screen, please respond as described below. 7 Note 1: Although this message will be automatically...

Regarding the Indicator Lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and theTEMP indicator have the meanings as described in the Table below.Please respond in accordance with the instructions within the Table. POWER indicator LAMP indicator TEMP indicator Description The o...

ENGLISH 9 WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued) Phenomena That May Easily Be Mistaken for Machine Defects Before requesting repair, check in accordance with the following chart.If the situation cannot be corrected, then contact your dealer. Although bright spots or dark...

Dimension Diagram Unit : mm 77.5 295 237 87.5 37 50.5 231 Item Specification Product name Liquid crystal projector Liquidcrystalpanel Panel size 1.8 cm (0.7 type) Drive system TFT active matrix Pixels ED-S3170A ： 480,000 pixels (800 horizontal x600 vertical) ED-X3270A ： 786,432 pixels (1024 horizont...

ENGLISH If a problem occurs with the equipment, first refer to the “WHAT TO DO WHEN YOUTHINK A MACHINE DEFECT HAS OCCURRED” section and run through the suggestedchecks. If this does not resolve the problem contact your dealer or service company. Theywill tell you what warranty condition is applied. ...

DUKANE CORPORATION FIVE-YEAR LIMITED WARRANTY This Dukane projector is warranted to the original purchaser for a period of five (5) years fromthe original purchase date – in normal operating conditions – against defects in material andworkmanship . DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL OTHERWAR...