Drive 15560 - Manuals

5 Assembly Instructions Cont. There are two methods for the installation of the motor Method A The motor is installed on the bed frame when the frame is standing on its side. Installation instructions can be found on pages 7-8. Method B The motor is installed from underneath the bed frame (horizonta...

7 A6. Once in place, replace the motor covers to secure the motor. A6. Once the motor is attached, lay bed flat and install head and foot boards. There are 2 height adjustments on the head and foot board. Select the desired positions and hook the frame onto the foot board. Slide lock towards leg of ...

8 REV3.1.23.14 Assembly Instructions Cont. End Method A The chart below indicates the height adjustments as they relate to the two adjustment options. *Rails cannot be used at this height. Deck Height Pins Leg Holes Upper Lower 1- High 1- Medium 1- Low Deck Height (inches) Deck Height Pins Leg Hole ...

11 Assembly Instructions Cont. B6. Once in place, replace the motor covers to secure the motor. End Method B

17 Drive recommends the following maintenance and cleaning procedures be conducted between users. ELECTRONICS • Check all controls to make sure all functions work properly. • Foot control • Head control• Check all cables for damaged or frayed wires. • Power cord • Pendant cord• Check to make sure al...

18 REV3.1.23.14 99 Seaview Boulevard Port Washington, NY 11050 Phone: 516-998-4600 Toll Free: 877.224.0946 Fax: 516.998.4601 www.drivemedical.com