Dodge 2011 Dakota - Manuals

WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision orbodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If youdo not read this entire manual, you may miss importantinforma...

VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle couldseriously affect its roadworthiness and safety andmay lead to a collision resulting in serious injury ordeath. 1 INTRODUCTION 7

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Locking Doors With A Key . . . . . . . . . . . . . . 15 䡵 Steering Wheel Lock — If Equipped . . . . . . . . . 15 ▫ To Man...

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has thekey code numbers for your vehicle locks. These numberscan be used to order duplicate keys from your authorizeddealer. Ask your authorized dealer for these numbersand keep them in a safe place. Ignition Key Removal Automat...

NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become temporarilytrapped in the ignition cylinder. If this occurs, rotate the key to the right slightly, then remove the key as de-scribed. If a malfunction occurs, the system will trap thekey in the ignition c...

CAUTION! An unlocked car is an invitation to thieves. Alwaysremove the key from the ignition and lock all thedoors when leaving the vehicle unattended. Manual Transmission — If Equipped When the steering wheel is in the LOCK position, thesteering and ignition systems are locked to provideantitheft p...

The system uses ignition keys that have an embeddedelectronic chip (transponder) to prevent unauthorizedvehicle operation. Therefore, only keys that are pro-grammed to the vehicle can be used to start and operatethe vehicle. The system will shut the engine off in twoseconds if someone uses an invali...

3. Insert the second valid key into the ignition switch.Turn the ignition switch to the ON/RUN position within15 seconds. After 10 seconds, a chime will sound. Inaddition, the Vehicle Security Light will begin to flash.Turn the ignition switch to the LOCK position andremove the second key. 4. Insert...

To Arm the System The Vehicle Security Alarm will set when you use thepower door locks, or use the Remote Keyless Entry (RKE)transmitter to lock the doors. After all the doors arelocked and closed, the Vehicle Security Light in theinstrument cluster will flash rapidly for approximately15 seconds to ...

NOTE: You may accidentally activate the Vehicle Secu- rity Alarm (horn sounds and lights flash) by entering thevehicle without using the RKE transmitter to unlock thedoor(s). The Vehicle Security Alarm can be disarmed withthe RKE transmitter unlock button or by inserting aprogrammed Sentry Key 威 int...

REMOTE KEYLESS ENTRY (RKE) This system allows you to lock or unlock the doors oractivate the Panic Alarm from distances up to approxi-mately 66 ft (20 m) using a Remote Keyless Entry (RKE)transmitter. The RKE transmitter does not need to bepointed at the vehicle to activate the system. NOTE: The lin...

3. Release both buttons at the same time. 4. Test the feature while outside of the vehicle by press-ing the LOCK/UNLOCK button on the RKE transmitter. NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate theVehicle Security Alarm. Opening a door with...

NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate theVehicle Security Alarm. Opening a door with the VehicleSecurity Alarm activated will cause the alarm to sound.Press the UNLOCK button to deactivate the VehicleSecurity Alarm System. 6. If the de...

To cancel the Panic mode, press and release the PANICbutton on the RKE transmitter a second time. Panic modewill automatically cancel after three minutes, or if thevehicle is started and or exceeds 15 mph (24 km/h).During the Panic Mode, the door locks and RKE systemswill function normally. Panic mo...

NOTE: Perchlorate Material – special handling may ap- ply. See www.dtsc.ca.gov/hazardouswaste/perchlorate 1. If the RKE transmitter is equipped with a screw,remove the screw. With the RKE transmitter buttonsfacing down, use a flat blade to pry the two halves of theRKE transmitter apart. Make sure no...

NOTE: • The park lamps will turn on and remain on duringRemote Start mode. • For security, power window and power sunroof op-eration (if equipped) are disabled when the vehicle isin the Remote Start mode. • The engine can be started two consecutive times (two15-minute cycles) with the RKE transmitte...

DOOR LOCKS Manual Door Locks All the doors can be manually locked from the inside bypushing down the door lock knob, located on the door trimpanel. Both front doors may be opened from the inside withthe door lock knob in the down or locked position. WARNING! • For personal security and safety in the...

Power Door Locks A power door lock switch is on each front door trimpanel. Use this switch to lock or unlock the doors. If you press the power door LOCK switch while the keyis in the ignition, and any front door is open, the power locks will not operate. This prevents you from acciden-tally locking ...

3. Place the key into the ignition. 4. Within 10 seconds, cycle the key from the LOCKposition to the ON/RUN position and back to LOCKposition, a minimum of four times; ending in the LOCKposition. (Do not start the engine.) 5. Within 30 seconds, press the driver’s door LOCKswitch in the LOCK directio...

5. Within 30 seconds, press the driver’s door LOCKswitch in the UNLOCK direction. 6. A single chime will sound to indicate the feature hasbeen changed. 7. To reactivate the feature, repeat the above steps. 8. If a chime is not heard, program mode was canceledbefore the feature could be changed. If n...

To use the system, open each rear door, slide the lever upto engage the locks, and down to disengage the child-protection locks. When the system on a door is engaged,that door can only be opened by using the outside doorhandle, even if the inside door lock is in the unlockedposition. WARNING! Avoid ...

WINDOWS Power Windows The control on the left front door has up-down switchesthat give you finger-tip control of all the power windows.There is a single opening and closing switch on thepassenger doors for passenger window control. Thewindows will operate when the ignition switch is turnedto the ON/...

WARNING! Never leave children alone in a vehicle. Leavingunattended children in a vehicle is dangerous for anumber of reasons. A child or others could be seri-ously or fatally injured. Don’t leave the key in theignition. A child could operate power windows,other controls, or move the vehicle. Auto-D...

windows down or partially open. This is a normaloccurrence and can be minimized. If the buffeting occurswith the rear windows open, open the front and rearwindows together to minimize the buffeting. OCCUPANT RESTRAINTS Some of the most important safety features in yourvehicle are the restraint syste...

WARNING! (Continued) • Wearing a seat belt incorrectly is dangerous. Seatbelts are designed to go around the large bones ofyour body. These are the strongest parts of yourbody and can take the forces of an accident thebest. Wearing your belt in the wrong place couldmake your injuries in an accident ...

2. The seat belt latch plate is above the back of the frontseat, next to your arm in the rear seat. Grasp the latchplate and pull out the belt. Slide the latch plate up thewebbing as far as necessary to allow the belt to go aroundyour lap. 3. When the belt is long enough to fit, insert the latchplat...

WARNING! (Continued) • A belt that is worn under your arm is dangerous.Your body could strike the inside surfaces of thevehicle in an accident, increasing head and neckinjury. A belt worn under the arm can causeinternal injuries. Ribs aren’t as strong as shoulderbones. Wear the belt over your should...

Adjustable Upper Shoulder Belt Anchorage In the front and second row outboard seats, the shoulderbelt can be adjusted upward or downward to helpposition the belt away from your neck. Press the releasebutton to release the anchorage, and then move it up ordown to the position that fits you best. As a...

How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward untilthe entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you willhear a clicking sound. This indicates the safety belt isnow in the ...

1. With all doors closed, and the ignition switch in anyposition except ON/RUN or START, buckle the driver ’sseatbelt. 2. Turn the ignition switch to the ON/RUN position,(engine does not need to be running). Wait for the SeatBelt Reminder Light to turn off. 3. Within 60 seconds of turning the igniti...

WARNING! Using a seat belt extender when not needed canincrease the risk of injury in an accident. Only usethe seat belt extender when the lap belt is not longenough when it is worn low and snug, and in therecommended seating positions. Remove and storethe extender when not needed. Supplemental Rest...

The Advanced Front Airbags have a multistage inflatordesign. This allows the airbag to have different rates ofinflation based on the severity and type of collision. This vehicle may be equipped with driver and/or frontpassenger seat track position sensors that may adjust theinflation rate of the Adv...

• Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch,and Seat Track Position Sensors Advanced Front Airbag Features The Advanced Front Airbag system has multistage driverand front passenger airbags. This syste...

WARNING! (Continued) • Do not use accessory seat covers or place objectsbetween you and the side airbags; the performancecould be adversely affected and/or objects couldbe pushed into you, causing serious injury. Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of thedriver and t...

WARNING! (Continued) • Being too close to the steering wheel or instrumentpanel during Advanced Front Airbag deploymentcould cause serious injury, including death. Air-bags need room to inflate. Sit back, comfortablyextending your arms to reach the steering wheel orinstrument panel. • The Side Airba...

A quantity of non-toxic gas is generated to inflate theSABIC. The inflating SABIC pushes the outside edge ofthe headliner out of the way and covers the window. TheSABIC inflates in about 30 milliseconds (about one-quarter of the time that it takes to blink your eyes) withenough force to injure you i...

If a Deployment Occurs The Advanced Front Airbags are designed to deflateimmediately after deployment. NOTE: Front and/or side airbags will not deploy in all collisions. This does not mean something is wrong withthe airbag system. If you do have a collision which deploys the airbags, anyor all of th...

WARNING! Deployed airbags and seat belt pretensioners cannotprotect you in another collision. Have the airbags,seat belt pretensioners, and the front seat belt retrac-tor assemblies replaced by an authorized dealer im-mediately. Also, have the Occupant Restraint Con-troller (ORC) system serviced as ...

WARNING! (Continued) • Do not attempt to modify any part of your airbagsystem. The airbag may inflate accidentally or maynot function properly if modifications are made.Take your vehicle to an authorized dealer for anyairbag system service. If your seat, including yourtrim cover and cushion, needs t...

Child Restraints Everyone in your vehicle needs to be buckled up all thetime, including babies and children. Every state in theUnited States, and all Canadian provinces, require thatsmall children ride in proper restraint systems. This is thelaw, and you can be prosecuted for ignoring it. Children12...

• The belt-positioning booster seat is for children weigh-ing more than 40 lbs (18 kg), but who are still too smallto fit the vehicle’s seat belts properly. If the childcannot sit with knees bent over the seat cushion whilethe child’s back is against the seatback, they need abelt-positioning booster...

Extended Cab • The Extended Cab right rear (if equipped with a rearseat) passenger seating position has lower anchoragesfor LATCH-equipped child restraints. Crew Cab • The Crew Cab second row seat has lower anchoragesthat are capable of accommodating LATCH- compatible child seats having flexible, we...

strap. Forward-facing toddler restraints, and some rear-facing infant restraints, will also be equipped with atether strap, a hook for attachment to the tether strapanchorage, and a means of adjusting the tension of thestrap. You will first loosen the child seat adjusters on the lowerstraps and on t...

In the rear seat, you may have trouble tightening thelap/shoulder belt on the child restraint because thebuckle or latch plate is too close to the belt path openingon the restraint. Disconnect the latch plate from thebuckle and twist the short buckle-end belt several timesto shorten it. Insert the l...

WARNING! (Continued) • Improper installation can lead to failure of aninfant or child restraint. It could come loose in acollision. The child could be seriously injured orkilled. Make sure the child restraint tether strap isalways routed through the proper anchor strapinner loop. Tether Straps at th...

2. Route the tether strap across to the center tetheranchorage. The center tether is located behind the slidedoor in the center of the vehicle, between the two seatingpositions. 3. Remove the slack in the tether strap so that the anchorstrap is pulled tight. Tether Straps at the Rear Passenger Seat ...

NOTE: Two anchors must be used for any of the three seating positions. WARNING! An incorrectly anchored tether strap could lead toseat failure and injury to the child. In a collision, theseat could come loose and allow the child to crashinto the inside of the vehicle or other passengers, oreven be t...

ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine anddrivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km).After the initial 60 miles (100 km), speeds up to 50 or55 mph (80 or 90 km/h) are desirable. While cruisin...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 85 ▫ Automatic Dimming Mirror — If Equipped . . . 86 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 86...

䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 ▫ Power Driver Seat . . . . . . . . . . . . . . . . . . . . 125 ▫ Manual Seat Adjustment . . . . . . . . . . . . . . . 128 ▫ Front Seat — Manual Recliner . . . . . . . . . . . 129 ▫ Manual Lumbar — If Equipped . . . . . . . . . ...

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal andvertical adjustment of the mirror. The mirror should beadjusted to center on the view through the rear window. Headlight glare can be reduced by moving the smallcontrol under the mirror to the night position (toward th...

Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glarefrom vehicles behind you. You can turn the feature on oroff by pressing the button at the base of the mirror. A lightnext to the button will illuminate to indicate when thedimming feature is activated. CAUTIO...

WARNING! Vehicles and other objects seen in the passenger sideconvex mirror will look smaller and farther awaythan they really are. Relying too much on yourpassenger side mirror could cause you to collide withanother vehicle or other object. Use your insidemirror when judging the size or distance of...

To adjust a mirror, turn the control wand toward the leftor right mirror positions indicated. Tilt the control wandin the direction you want the mirror to move. When you are finished adjusting the mirror, turn thecontrol to the center position to prevent accidentallymoving a mirror. WARNING! Vehicle...

Uconnect™ Phone Button The radio or steering wheel controls (ifequipped) will contain the two control buttons(Uconnect™ Phone button and Voice Command button) that will enable you to access the system. When you press the button you willhear the word Uconnect™ followed by a BEEP. The beepis your sign...

• For certain operations, compound commands can beused. For example, instead of saying “Setup” and then“Phone Pairing”, the following compound commandcan be said: “Setup Phone Pairing.” • For each feature explanation in this section, only thecompound form of the voice command is given. Youcan also b...

To complete the pairing process, you will need to refer-ence your mobile phone Owner’s Manual. TheUconnect™ website may also provide detailed instruc-tions for pairing. The following are general phone to Uconnect™ Phonepairing instructions: • Press the button to begin. • After the “Ready” prompt and...

Dial by Saying a Number • Press the button to begin. • After the “Ready” prompt and the following beep, say“Dial”. • The system will prompt you to say the number youwant to call. • For example, you can say “234-567-8901”. • The Uconnect™ Phone will confirm the phone numberand then dial. The number w...

• After the “Ready” prompt and the following beep, say“Phonebook New Entry”. • When prompted, say the name of the new entry. Use oflong names helps the Voice Command and it is recom-mended. For example, say “Robert Smith” or “Robert”instead of “Bob”. • When prompted, enter the number designation (e....

• Automatic download and update, if supported, beginsas soon as the Bluetooth 威 wireless phone connection is made to the Uconnect™ Phone, for example, after youstart the vehicle. • A maximum of 1000 entries per phone will be down-loaded and updated every time a phone is connectedto the Uconnect™ Pho...

NOTE: • The phone handset must support Bluetooth 威 OBEX transfers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if theyare already connected to any system via Bluetooth 威 , and you may see a message on the phone display thatthe Bluetooth 威 link is busy. In thi...

After you are finished editing an entry in the phonebook,you will be given the opportunity to edit another entry inthe phonebook, call the number you just edited, or returnto the main menu. “Phonebook Edit” can be used to add another phonenumber to a name entry that already exists in thephonebook. F...

Delete/Erase “All” Uconnect™ Phonebook Entries • Press the button to begin. • After the “Ready” prompt and the following beep, say“Phonebook Erase All”. • The Uconnect™ Phone will ask you to verify that youwish to delete all the entries from the phonebook. • After confirmation, the phonebook entries...

Phone Call Features The following features can be accessed through theUconnect™ Phone if the feature(s) are available on yourmobile service plan. For example, if your mobile serviceplan provides three-way calling, this feature can beaccessed through the Uconnect™ Phone. Check withyour mobile service...

on hold may not become active automatically. This is cellphone-dependent. To bring the call back from hold, pressand hold the button until you hear a single beep. Redial • Press the button to begin. • After the “Ready” prompt and the following beep, say“Redial”. • The Uconnect™ Phone will call the l...

• After the “Ready” prompt and the following beep, saythe name of the language you wish to switch toEnglish, Espanol, or Francais. • Continue to follow the system prompts to completethe language selection. After selecting one of the languages, all prompts andvoice commands will be in that language. ...

NOTE: • You may not hear all of the tones due to mobile phonenetwork configurations. This is normal. • Some paging and voice mail systems have system timeout settings that are too short and may not allow theuse of this feature. Barge In - Overriding Prompts The “Voice Command” button can be used whe...

using Uconnect™ Phone. The status is given for networksignal strength, phone battery strength, etc. Dialing Using the Mobile Phone Keypad You can dial a phone number with your mobile phonekeypad and still use the Uconnect™ Phone (while dialingvia the mobile phone keypad, the user must exercisecautio...

You can either press the Uconnect™ Phone button torestore the factory setting or repeat the words andphrases when prompted by the Uconnect™ Phone. Forbest results, the Voice Training session should be com-pleted when the vehicle is parked with the enginerunning, all windows closed, and the blower fa...

• fully closed windows, • dry weather condition. • Even though the system is designed for users speakingin North American English, French, and Spanish ac-cents, the system may not always work for some. • When navigating through an automated system suchas voice mail, or when sending a page, at the en...

• fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity, echo, and loudnessto a large degree rely on the phone and network, andnot the Uconnect™ Phone. • Echo at the phone far end can sometimes be reducedby lowering the in-vehicl...

16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stopthe system from announcing the new incoming mes-sages. • Press the button. • After the “Ready” prompt and the ...

General Information This device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • Changes or modifications not expressly approved bythe party responsible for compliance could void theuser’s authority to operate the equipment. • T...

NOTE: If you do not say a command within a few seconds, the system will present you with a list ofoptions. If you ever wish to interrupt the system while it listsoptions, press the Voice Command button, listen for the beep, and say your command. Pressing the Voice Command button while the system is ...

WARNING! (Continued) • Do not allow people to ride in any area of yourvehicle that is not equipped with seats and seatbelts. • Be sure everyone in your vehicle is in a seat andusing a seat belt properly. Power Driver Seat On some models the driver’s seat can be equipped withsix-way power. The power ...

WARNING! • Adjusting a seat while driving may be dangerous.Moving a seat while driving could result in loss ofcontrol which could cause a collision and seriousinjury or death. • Seats should be adjusted before fastening theseatbelts and while the vehicle is parked. Seriousinjury or death could resul...

CAUTION! Do not place any article under a power seat orimpede its ability to move as it may cause damage tothe seat controls. Seat travel may become limited ifmovement is stopped by an obstruction in the seat’spath. Manual Seat Adjustment For models equipped with manual seats, the driver andpassenge...

WARNING! • Adjusting a seat while driving may be dangerous.Moving a seat while driving could result in loss ofcontrol which could cause a collision and seriousinjury or death. • Seats should be adjusted before fastening theseatbelts and while the vehicle is parked. Seriousinjury or death could resul...

Manual Lumbar — If Equipped Some vehicle may be equipped with a manual lumbarsupport. The manual lumbar rotary control adjustment islocated on the left side of the driver’s seat. Rotate theknob to increase or decrease the amount of lumbarsupport. Heated Seats — If Equipped On some models, the front ...

CAUTION! Repeated overheating of the seat could damage theheating element and/or degrade the material of the seat. Head Restraints Head restraints are designed to reduce the risk of injuryby restricting head movement in the event of a rearimpact. Head restraints should be adjusted so that the topof ...

Rear Head Restraints The rear seat is equipped with nonadjustable head re-straints. Refer to “Occupant Restraints” in “Things toKnow Before Starting Your Vehicle” for information onchild seat tether routing. Extended Cab/Crew Cab Rear Seat More cargo space is available by lifting up on the rearseat ...

2. Then push the safety latch lever up while lifting thegrille with your hand. It is located at the bottom center ofthe grille. Lift the hood, and the gas filled props will hold it open. CAUTION! To prevent possible damage, do not slam the hood toclose it. Use a firm downward push at the center fron...

LIGHTS The headlight switch is located on the left side of theinstrument panel next to the steering wheel. Headlights, Parking Lights And Panel Lights When the headlight switch is rotated to the firstposition, the parking lights, taillights, side marker lights, license plate light and instrument pan...

Headlight Delay To aid in your exit, your vehicle is equipped with aheadlight delay that will leave the headlight on for60 seconds. This delay is initiated when the ignition isturned OFF while the headlight switch is on, and then theheadlight switch is cycled off. The headlights will remainon for 60...

Interior Lights Courtesy and dome lights are turned on when the frontdoors are opened, when the dimmer control (rotatingwheel on the right side of the switch) is rotated to thesecond upward detent position, or if equipped, when theUNLOCK button is pressed on the Remote Keyless Entry(RKE) transmitter...

NOTE: Club Cab 威 /Quad Cab 威 models may have an optional switched dome lamp that is operated by press-ing the lens. Multifunction Lever The multifunction lever is located on the left side of thesteering column. Turn Signals Move the multifunction lever up or down and the arrowson each side of the in...

• If a turn signal has been left on for a minimum of1 mile (1.6 km), a continuous chime will sound. Lane Change Assist Tap the lever up or down once, without moving beyondthe detent, and the turn signal (right or left) will flashthree times then automatically turn off. Flash-To-Pass You can signal a...

Battery Saver To protect the life of your vehicle’s battery, Load Shed-ding is provided for both the interior and exterior lights. If the ignition is OFF and any door is left ajar for15 minutes or the dimmer control is rotated upwards for15 minutes, the interior lights will automatically turn off. I...

WINDSHIELD WIPERS AND WASHERS The multifunction lever is located on the left side of thesteering column. Windshield Wipers The wipers and washers are operated by a switch in themultifunction lever. Turn the end of the multifunctionlever to select the desired wiper speed. Windshield Wiper/Washer Leve...

Intermittent Wiper System The intermittent feature of this system was designed foruse when weather conditions make a single wiping cycle,with a variable pause between cycles, desirable. Formaximum delay between cycles, rotate the control knobinto the upper end of the delay range. The delay interval ...

To prevent freeze-up of your windshield washer systemin cold weather, select a solution or mixture that exceedsthe temperature range of your climate. This rating infor-mation can be found on most washer fluid containers. WARNING! Sudden loss of visibility through the windshieldcould lead to a collis...

Pull the lever toward the steering wheel to unlock thesteering column. With one hand firmly on the steeringwheel, move the steering column up or down, as desired.Push the lever away from the steering wheel to lock thecolumn firmly in place. WARNING! Do not adjust the steering column while driving.Ad...

NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shutdown if multiple Speed Control functions are operated atthe same time. If this occurs, the Electronic Speed ControlSystem can be reactivated by pushing the ElectronicSpeed Control ON/OFF button ...

To Accelerate for Passing Press the accelerator as you would normally. When thepedal is released, the vehicle will return to the set speed. NOTE: When driving uphill, at elevations above 2,000 ft (610 m), or when the vehicle is heavily loaded (especiallywhen towing) the vehicle may slow below the SE...

OVERHEAD CONSOLE The overhead console has the following features: • Courtesy Lights • Garage Door Opener — If Equipped • Compass/Temperature Mini-Trip Computer — IfEquipped Courtesy/Reading Lights Near the front of the console are two courtesy/readinglights. Both lights illuminate as courtesy lights...

RESET Button Use the RESET button to reset the following displays: • Average Fuel Economy • Trip Odometer • Elapsed time. STEP Button Use the STEP button to choose, or cycle through, the fourtrip conditions. RESET Button STEP Button 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Global Reset If the RESET button is pressed twice within two secondswhile in any of the three resettable displays (AVG ECO,ODO, ET), the GLOBAL RESET will reset all threedisplays. Compass/Temperature Display WARNING! Even if the display still reads a few degrees above 32°F (0° C), the road surface m...

If the compass appears erratic and the CAL symbol doesnot appear, you must manually put the compass into the“Calibration” mode. To Put Into a Calibration Mode Turn the ignition ON and set the display to “Compass/Temperature.” Press and hold the RESET button tochange the display between VAR (compass ...

Outside Temperature Because the ambient temperature sensor is located underthe hood, engine temperature can influence the displayedtemperature; therefore, temperature readings are slowlyupdated when the vehicle speed is below 20 mph(30 km/h) or during stop-and-go driving. GARAGE DOOR OPENER — IF EQU...

WARNING! • Your motorized door or gate will open and closewhile you are training the Universal Transceiver.Do not train the transceiver if people, pets or otherobjects are in the path of the door or gate. Only usethis transceiver with a garage door opener that hasa “stop and reverse” feature as requ...

Your vehicle should be parked outside of the garagewhile training. • Turn the ignition switch to the ON/RUN position. • Place the handheld transmitter 1 to 3 inches (3 to 8 cm)from the HomeLink 威 buttons while keeping the HomeLink 威 display in view. For optimal training, point the battery end of the...

Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter sig-nals to “time-out” (or quit) after several seconds oftransmission – which may not be long enough forHomeLink 威 to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are...

General Information This device complies with FCC rules part 15 and IndustryCanada RSS-210. Operation is subject to the followingtwo conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may bereceived including interference that may cause un...

When the optional Cigar Lighter heating element is used,it heats when pushed in and pops out automaticallywhen ready for use. To preserve the heating element, do not hold the lighter in the heating position. NOTE: • To ensure proper operation a MOPAR 威 knob and element must be used. • Do not exceed ...

CAUTION! (Continued) • Accessories that draw higher power (i.e., coolers,vacuum cleaners, lights, etc.), will discharge thebattery even more quickly. Use these only inter-mittently and with greater caution. • After the use of high power draw accessories, orlong periods of the vehicle not being start...

A two-cavity cupholder is available on all Crew Cabs,with rear seats mounted on the floor. REAR CRATE ’N GO 姞 STORAGE — IF EQUIPPED The rear Crate ’n Go 威 storage, located under the rear seat lower cushion, consists of two removable, collapsiblestorage crates. To open the crates, lift upward on the ...

To remove the crate, press on the release lever, located onthe ends of the base, and lift up on the crate. To install the crate into the base, insert the crate into theinboard slot and push down on the outboard side of thecrate, then snap into place. To collapse the crate, push the crate end flaps i...

Plastic Grocery Bag Retainers Retainer hooks, which will hold plastic grocery baghandles, are built into the back panel of the cab. CONSOLE FEATURES — IF EQUIPPED Floor Console Features The Floor Console between the driver’s and front pas-senger’s seat has the following features: • Miscellaneous sto...

Storage Compartments Some miscellaneous storage compartments and cuphold-ers are both removable and dishwasher safe (upper rack of dishwasher only) for cleaning purposes. Various stor-age compartments provide versatile and useful storage.A coin holder is also provided inside the driver sidestorage b...

To remove the cleats from the utility rail, remove the endcap by pushing up on the locking tab, located on thebottom of the end cap. Slide the cleat off the end of therail. REAR WINDOW FEATURES Rear Window Defroster — If Equipped The rear window defroster button is located on theright-side of the Ai...

CAUTION! Failure to follow these cautions can cause damage tothe heating elements: • Use care when washing the inside of the rearwindow. Do not use abrasive window cleaners onthe interior surface of the window. Use a soft clothand a mild washing solution, wiping parallel tothe heating elements. Labe...

SLIDE-IN CAMPERS Camper Applications Certain truck models are not recommended for slide-incampers. To determine if your vehicle is excluded, pleaserefer to the Consumer Information Truck-Camper Load-ing document, located in your Owner’s Manual packet oravailable from your authorized dealer. For safe...

3. Lift the tailgate off of the pivot on the passenger sideby pulling upward and rearward at the same time. 4. Slide the tailgate to the passenger side while makingsure clearance from the box and taillight is maintained. To reinstall the tailgate, do the following: 1. Slide the tailgate onto the dri...

2. Secure the tailgate in the partially-open position: 3. Open the tailgate slightly. 4. Snap the tailgate support cable between the cableguide and the tailgate bumper. Do this on both sides ofthe tailgate. 1 — Bulkhead Divider Slot2 — Wheel Housing Indentions Tailgate Guide 3 UNDERSTANDING THE FEAT...

To return the tailgate to the full-open position: 1. Lift up on the tailgate. 2. Remove both cables from between the cable guidesand the tailgate bumpers, and lower the tailgate. CAUTION! • Care should always be exercised when operating avehicle with cargo. Vehicle speeds may need to bereduced. Seve...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 177 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 178 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 179 䡵 Media Center 230 (REQ) — AM/FM StereoRadio And 6–Disc CD/DVD Chang...

▫ Notes On Playing MP3 Files . . . . . . . . . . . . 218 ▫ Operation Instructions - Auxiliary Mode . . . . 220 䡵 Media Center 130 With Satellite Radio (SalesCode RES+RSC) . . . . . . . . . . . . . . . . . . . . . . . 221 ▫ Operating Instructions — Radio Mode . . . . . 221 ▫ Operation Instructions — ...

INSTRUMENT PANEL FEATURES 1 — Headlight Switch 6 — Glove Compartment 11 — Transfer Case Switch* 2 — Air Outlets 7 — Radio 12 — Speed Control Switches 3 — Demister Outlets 8 — Climate Controls 13 — Hood Release 4 — Instrument Cluster 9 — Power Outlet 14 — Parking Brake Release 5 — Airbags 10 — Heated...

INSTRUMENT CLUSTER 178 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The fuel gauge shows the level of fuel in the fuel tankwhen ignition switch is in the ON/RUN position. 2. Temperature Gauge The temperature gauge shows engine coolant tempera-ture. Any reading within the normal range indicates thatthe engine cooling syst...

Vehicle Odometer Messages When the appropriate conditions exist, the followingmessages will display in the odometer: door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door Ajar gASCAP . . . . . . . . . . . . . . . . . . . . . . . Fuel Cap Fault LoW tirE . . . . . . . . . . . . . . . . ....

WARNING! Continued operation with the Transmission Tem-perature Warning Light illuminated could cause thefluid to boil over, come in contact with hot engine orexhaust components causing a fire that may result inpersonal injury. 19. Electronic Throttle Control (ETC) – If Equipped The Electronic Throt...

WARNING! A malfunctioning catalytic converter, as referencedabove, can reach higher temperatures than in normaloperating conditions. This can cause a fire if youdrive slowly or park over flammable substances suchas dry plants or wood or cardboard, etc. This couldresult in death or serious injury to ...

23. Airbag Warning Light This light will turn on for four to eight secondsas a bulb check when the ignition switch is firstturned to ON/RUN. If the light is either not onduring starting, stays on, or turns on while driving, then have the system inspected at an authorizeddealer as soon as possible. R...

29. 4WD LOW Indicator This light alerts the driver that the vehicle is inthe four-wheel drive LOW mode. The front andrear driveshafts are mechanically locked to-gether forcing the front and rear wheels to rotate at the same speed. Low range provides a greatergear reduction ratio to provide increased...

Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature(if equipped). Refer to “Uconnect™ Phone” in theUconnect™ User Manual located on the DVD for furtherdetails. If your vehicle is not equipped with or this feature is notavailable on your vehicle, a “Not...

NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings aftera disc is loaded, changes will not be effective. Also, thedefaults are effective only if the disc supports thecustomer-preferred settings. AM and FM Buttons Press the buttons to select AM...

Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptableMP3/WMA file recording media and formats are limited.When writing MP3/WMA files, pay attention to thefollowing restrictions. Supported Media (Disc Types) The MP3/WMA file recording media supported by theradio are CDD...

Playlist files are not supported. MP3 Pro files are notsupported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded,the radio checks all files on the medium. If the mediumcontains a lot of folders or files, the radio will take moretime to start playing the MP3/WMA files. Load...

Press the INFO button once more to return to ⬙ elapsed time ⬙ priority mode. Press and hold the INFO button for three seconds ormore and radio will display song titles for each file. Press and hold the INFO button again for three secondsto return to ⬙ elapsed time ⬙ display. Operation Instructions -...

DTS™ ⬙ DTS™ ⬙ and ⬙ DTS™ 2.0 ⬙ are trademarks of Digital The- ater Systems, Inc. Uconnect™ Multimedia (Satellite Radio) — IfEquipped Satellite radio uses direct satellite-to-receiver broadcast-ing technology to provide clear digital sound, coast tocoast. The subscription service provider is Sirius S...

using the TUNE/SCROLL control knob until Sirius ID isselected. Press the TUNE/SCROLL control knob and theSirius ID number will display. The Sirius ID numberdisplay will time out in two minutes. Press any button onthe radio to exit this screen. Selecting Uconnect™ Multimedia (Satellite) Mode Press th...

Every time a preset button is used, a correspondingbutton number will display. Buttons 1 - 6 These buttons tune the radio to the channels that youcommit to pushbutton memory (12 Satellite stations). MEDIA CENTER 130 (SALES CODE RES) NOTE: The radio sales code is located on the lower right side of th...

RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttonscauses the tuner to search for the next frequency in thedirection of the arrows. This feature operates in eitherAM or FM frequencies. TUNE Control Turn the rotary TUNE/SCROLL control knob clockwiseto increase or counterclockwise to decrease ...

SET/RND Button — To Set the PushbuttonMemory When you are receiving a station that you wish tocommit to pushbutton memory, press the SET/RNDbutton. The symbol SET 1 will now show in the displaywindow. Select the button (1 to 6) you wish to lock ontothis station and press and release that button. If ...

• This radio is capable of playing compact discs (CD),recordable compact discs (CD-R), rewritable compactdiscs (CD-RW), compact discs with MP3 tracks andmultisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CDlabel facing up. Th...

If you have ejected a disc and have not removed it within10 seconds, it will be reloaded. If the CD is not removed,the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF. NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-to...

Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3file recording media and formats are limited. Whenwriting MP3 files, pay attention to the following restric-tions. Supported Media (Disc Types) The MP3 file recording media supported by the radio areCDDA, CD-R, CD-RW, MP...

Playback of MP3 Files When a medium containing MP3 data is loaded, theradio checks all files on the medium. If the mediumcontains a lot of folders or files, the radio will take moretime to start playing the MP3 files. Loading times for playback of MP3 files may be affectedby the following: • Media -...

MEDIA CENTER 130 WITH SATELLITE RADIO(SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Power Switch/Volume Control (Rotar...

Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/SCROLL control knob to set the minutes. The minuteswill begin to blink. 4. Adjust the minut...

Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASSwill display. Turn the TUNE/SCROLL control knob tothe right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a secondtime and MID will display. Turn the TUNE/SCROLLcontrol kno...

By pressing the SEEK button when the Music Type iconis displayed, the radio will be tuned to the next frequencystation with the same selected Music Type name. TheMusic Type function only operates when in the FMmode. If a preset button is activated while in the Music Type(Program Type) mode, the Musi...

TIME Button Press this button to change the display from a large CDplaying time display to a small CD playing time display. RW/FF Press and hold FF (Fast Forward) and the CD player willbegin to fast forward until FF is released or RW oranother CD button is pressed. The RW (Reverse) buttonworks in a ...

The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of filenames and folder names is limited. For large numbersof files and/or folders, the radio may be unable todisplay the file nam...

rates (VBR) are also supported. The majority of MP3 filesuse a 44.1 kHz sampling rate and a 192, 160, 128, 96 orVBR bit rates. MPEG Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224,192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio L...

Every time a preset button is used, a correspondingbutton number will display. Buttons 1 - 6 These buttons tune the radio to the channels that youcommit to pushbutton memory (12 Satellite stations). Operating Instructions (Uconnect™ Phone) — IfEquipped Refer to “Uconnect™ Phone” in the Uconnect™ Use...

3. Do not apply paper or tape to the disc; avoid scratch-ing the disc. 4. Do not use solvents such as benzene, thinner, cleaners,or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may becometoo...

Air Conditioning and Heater Air Conditioning and Heater Operation To turn on the air conditioning, set the fan control at anyspeed and press the SNOWFLAKE button located at theright of the control panel. Conditioned air will be di-rected through the outlets selected by the mode control. A light at t...

• For information on operating the rear defrost, refer to“Rear Window Features” in “Understanding The Fea-tures Of Your Vehicle”. Blower Control The rotary knob on the left of thecontrol panel is the Blower Control.Turn the knob clockwise to one of thefour positions to obtain the blowerspeed you des...

edges of the instrument panel. The demisters also pro-vide extra air ducts for circulation. They are in operationwhenever the Floor, Mix, Defrost, or Bi-Level modes arein use. NOTE: When you turn off the engine you may hear a hissing sound from under the hood for a short period oftime. This is a nor...

Operation Tips Chart 4 UNDERSTANDING YOUR INSTRUMENT PANEL 245

STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 251 ▫ Automatic Transmission . . . . . . . . . . . . . . . 251 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 251 ▫ Extreme Cold Weather (Below –20°F Or–29°C) . . . . . . . . . . . . . . . . . ...

▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 310 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 311 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 311 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 312 䡵 Vehicle Loading . . . . . . . . . . . . . . . ...

STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts. WARNING! Never leave children alone in a vehicle. Leavingchildren in a vehicle unattended is dangerous for anumber of reasons. A child or others could be seri-ously ...

WARNING! Remember to disconnect the engine block heatercord before driving. Damage to the 110-115 Voltelectrical cord could cause electrocution. AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow-ing precautions are not observed: • Shift into PARK only after the vehic...

REVERSE This range is for moving the vehicle backward. Use onlyafter the vehicle has come to a complete stop. NEUTRAL This range is used when vehicle is standing for pro-longed periods with engine running. Engine may bestarted in this range. Set the parking brake if you mustleave the vehicle. DRIVE ...

• the TOW/HAUL switch has not been activated; • transmission has reached normal operating temperature. NOTE: • If the vehicle is started in extremely cold temperatures,the transmission may not shift into Overdrive and willautomatically select the most desirable gear for opera-tion at this temperatur...

economy), and automatic closed-throttle downshifts tothird gear (for improved braking) will occur duringsteady braking. The “TOW/HAUL Indicator Light” will illuminate in theinstrument cluster to indicate when the switch has beenactivated. Pressing the switch a second time restoresnormal operation. I...

NOTE: • The torque converter clutch will not engage until thetransmission fluid and engine coolant are warm (usu-ally after 1-3 miles [1.6 - 4.8 km] of driving). Becausethe engine speed is higher when the torque converterclutch is not engaged, it may seem as if the transmis-sion is not shifting into...

The NV233/243 transfer case provides four mode posi-tions: • Two-wheel drive high range (2WD) • Four-wheel drive lock range (4WD LOCK) • Four-wheel drive low range (4WD LOW) • Neutral (N) The NV233/243 transfer case is designed to be driven inthe two-wheel drive position (2WD) for normal streetand h...

If one or more shift requirements are not met: 1. An indicator light will flash. 2. The transfer case will not shift. NOTE: Before retrying a selection, make certain that all the necessary requirements for selecting a new transfercase position have been met. To retry the selection, turnthe transfer ...

2WD Rear-Wheel Drive High — This range is used for normalstreet and highway driving on dry, hard-surfaced roads. 4WD LOCK Four-Wheel Drive Lock — This range locks the front andrear driveshafts together forcing the front and rearwheels to rotate at the same speed. This range providesadditional tracti...

2WD-to-4WD LOCK or 4WD LOCK-to-2WD Turn the transfer case switch to the desired position.Shifts between 2WD and 4WD LOCK can be done withthe vehicle stopped, or in motion. With the vehicle inmotion, the transfer case will engage/disengage faster ifyou momentarily release the accelerator pedal after ...

Alternate Procedure 1. Bring the vehicle to complete stop. 2. With the key ON and the engine either OFF orrunning, shift the transmission into NEUTRAL. 3. Turn the transfer case switch to the desired position. 4. After the desired position indicator light is ON (notflashing), shift the transmission ...

Traction When driving on wet or slushy roads, it is possible for awedge of water to build up between the tire and roadsurface. This is known as hydroplaning and may causepartial or complete loss of vehicle control and stoppingability. To reduce this possibility, the following precau-tions should be ...

Shallow Standing Water Although your vehicle is capable of driving throughshallow standing water, consider the following Cautionand Warning before doing so. CAUTION! • Always check the depth of the standing waterbefore driving through it. Never drive throughstanding water that is deeper than the bot...

WARNING! • Driving through standing water limits your vehi-cle’s traction capabilities. Do not exceed 5 mph(8 km/h) when driving through standing water. • Driving through standing water limits your vehi-cle’s braking capabilities, which increases stop-ping distances. Therefore, after driving through...

After Driving Off-Road Off-road operation puts more stress on your vehicle thandoes most on-road driving. After going off-road, it isalways a good idea to check for damage. That way youcan get any problems taken care of right away and haveyour vehicle ready when you need it. • Completely inspect the...

• If you experience unusual vibration after driving inmud, slush or similar conditions, check the wheels forimpacted material. Impacted material can cause awheel imbalance and freeing the wheels of it willcorrect the situation. POWER STEERING The standard power steering system will give you goodvehi...

CAUTION! Prolonged operation of the steering system at the endof the steering wheel travel will increase the steeringfluid temperature and it should be avoided whenpossible. Damage to the power steering pump mayoccur. Power Steering Fluid Check Checking the power steering fluid level at a definedser...

If necessary, add fluid to restore to the proper indicatedlevel. With a clean cloth, wipe any spilled fluid from allsurfaces. Refer to “Fluids, Lubricants, and GenuineParts” in “Maintaining Your Vehicle” for furtherinformation. PARKING BRAKE Before leaving the vehicle, make sure that the parkingbrak...

CAUTION! If the “Brake Warning Light” remains on with theparking brake released, a brake system malfunctionis indicated. Have the brake system serviced by anauthorized dealer immediately. BRAKE SYSTEM In the event power assist is lost for any reason (forexample, repeated brake applications with the ...

TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”molded into the sidewall preceding the size designa-tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on Europeandesign standards. ...

Tires designed to this standard have the letter “T”molded into the sidewall preceding the size designa-tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. designstandards and it begins with the tire diameter moldedinto the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Char...

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load correspondingto its load index under certain operating conditions— The maximum speed correspo...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire,however, the date code may only be on one side. Tireswith white sidewalls will have the full TIN, including thedate code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of bl...

Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body locatedbetween the front and rear door (of a four-door vehicle) runningfrom the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after th...

Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the:1) number of people that can be carried in the vehicle2) total weigh...

Loading The vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load carrying capacity if youadhere to the loading conditions, tire size, and cold tireinflation pressures specified on the Tire and LoadingInformation pl...

Inflation pressures specified on the placard are always“cold tire inflation pressure.” Cold tire inflation pressureis defined as the tire pressure after the vehicle has notbeen driven for at least three hours or driven less than1 mile (1.6 km) after a three hour period. The cold tireinflation pressu...

WARNING! Fast spinning tires can be dangerous. Forces gener-ated by excessive wheel speeds may cause tire dam-age or failure. A tire could explode and injure some-one. Do not spin your vehicle’s wheels faster than30 mph (48 km/h) or for more than 30 secondscontinuously when you are stuck, and do not...

Life of Tire The service life of a tire is dependent upon varyingfactors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and the spare tire should be replaced after sixyears, regardless of the remaining tread. Failure tofollow this warning can result i...

CAUTION! (Continued) • Drive cautiously and avoid severe turns and largebumps, especially with a loaded vehicle. • Do not install tire chains on front wheels ofvehicles. • Do not drive for a prolonged period on dry pave-ment. • Observe the tire chain manufacturer’s instructionson method of installat...

If you need snow tires, select tires equivalent in size andtype to the original equipment tires. Use snow tires onlyin sets of four; failure to do so may adversely affect thesafety and handling of your vehicle. Snow tires generally have lower speed ratings than whatwas originally equipped with your ...

The suggested rotation method is the “forward cross”shown in the following diagram. This rotation patterndoes not apply to some directional tires that must not bereversed. TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitoring System (TPMS) will warnthe driver of a low tire pressure based ...

• Seasonal temperature changes will affect tire pressure,and the TPMS will monitor the actual tire pressure inthe tire. Base System The Tire Pressure Monitor System (TPMS) uses wirelesstechnology with wheel rim mounted electronic sensors tomonitor tire pressure levels. Sensors, mounted to eachwheel ...

General Information This device complies with part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference received,including interference that may cause undesired...

E-85 Usage In Non-Flex Fuel Vehicles Non-FFV vehicles are compatible with gasoline contain-ing 10% ethanol (E10). Gasoline with higher ethanolcontent may void the vehicle’s warranty. If a Non-FFV vehicle is inadvertently fueled with E-85fuel, the engine will have some or all of these symptoms: • ope...

CAUTION! (Continued) • The use of fuel additives which are now beingsold as octane enhancers is not recommended.Many of these products contain high concentra-tions of methanol. Fuel system damage or vehicleperformance problems resulting from the use ofsuch fuels or additives is not the responsibilit...

WARNING! (Continued) • Guard against carbon monoxide with propermaintenance. Have the exhaust system inspectedevery time the vehicle is raised. Have any abnor-mal conditions repaired promptly. Until repaired,drive with all side windows fully open. FLEXIBLE FUEL (4.7L ENGINE ONLY) — IFEQUIPPED E85 Ge...

Ethanol Fuel (E85) E85 is a mixture of approximately 85% fuel ethanol and15% unleaded gasoline. WARNING! Ethanol vapors are extremely flammable and couldcause serious personal injury. Never have any smok-ing materials lit in or near the vehicle when remov-ing the fuel filler tube cap (gas cap) or fi...

Starting The characteristics of E85 fuel make it unsuitable for usewhen ambient temperatures fall below 0°F (-18°C). In therange of 0°F (-18°C) to 32°F (0°C), you may experience anincrease in the time it takes for your engine to start, anda deterioration in driveability (sags and/or hesitations)unti...

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door. Whenfueling, the cap may be placed on the inside of the fillerdoor. If the gas cap is lost or damaged, be sure the replacementcap is for use with this vehicle. CAUTION! • Damage to the fuel system or emissions ...

WARNING! (Continued) • Never add fuel to the vehicle when the engine isrunning. This is in violation of most state andfederal regulations and may cause the “Malfunc-tion Indicator Light (MIL)” to turn on. • A fire may result if gasoline is pumped into aportable container that is inside of a vehicle ...

VEHICLE LOADING Certification Label As required by National Highway Traffic Safety Admin-istration Regulations, your vehicle has a certificationlabel affixed to the driver’s side door. This label contains the month and year of manufacture,Gross Vehicle Weight Rating (GVWR), Gross Axle WeightRating (...

should then be determined separately to be sure that theload is properly distributed over front and rear axle.Weighing the vehicle may show that the GAWR of eitherthe front or rear axles has been exceeded but the totalload is within the specified GVWR. If so, weight must beshifted from front to rear...

Common Towing Definitions The following trailer towing related definitions will assistyou in understanding the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.This includes driver, passengers, cargo and tongueweight. The total load mus...

equalizing) hitch are recommended for heavier tongueweights and may be required depending on vehicle andtrailer configuration/loading to comply with Gross AxleWeight Rating (GAWR) requirements. WARNING! • An improperly adjusted weight-distributing hitchmay reduce handling, stability, and braking per...

EXAMPLE — With Weight-Distributing Hitch (Correct) EXAMPLE — Improper Adjustment of Weight- Distributing Hitch (Incorrect) 5 STARTING AND OPERATING 319

Trailer Hitch Classification The rear bumper is intended to tow trailers up to2,000 lbs (907 kg) without added equipment or alter-ations to the standard equipment. Your vehicle may befactory equipped for safe towing of trailers weighingover 2,000 lbs (907 kg) with the optional Trailer Tow PrepPackag...

Trailer Towing Weights (Maximum Trailer WeightRatings) NOTE: For additional trailer towing information in- cluding maximum trailer and tongue weight rating foryour vehicle, refer to the following website addresses: • http:// www.dodge.com/bodybuilder • http:// www.dodge.ca (Canada) Trailer and Tongu...

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additionalfactory-installed options, or dealer-installed options,must be considered as part of the total load on yourvehicle. Refer to “Tire Safety Information/Tire and Load-ing Information Placard” in ...

− An electronically actuated trailer brake controller is required when towing a trailer with electronicallyactuated brakes. When towing a trailer equipped witha hydraulic surge actuated brake system, an electronicbrake controller is not required. − Trailer brakes are recommended for trailers over 1,...

The Trailer Tow Package may include a four and seven-pin wiring harness. Use a factory approved trailer har-ness and connector. NOTE: Do not cut or splice wiring into the vehicle’s wiring harness. The electrical connections are all complete to the vehiclebut you must mate the harness to a trailer co...

Towing Tips Before setting out on a trip, practice turning, stoppingand backing the trailer in an area away from heavytraffic. Automatic Transmission The “DRIVE” range can be selected when towing. How-ever, if frequent shifting occurs while in this range, theTOW/HAUL feature should be selected. NOTE...

NOTE: Check the automatic transmission fluid level before towing. Tow/Haul – If Equipped To reduce potential for automatic transmission overheat-ing, turn the TOW/HAUL feature ON when driving inhilly areas or shift the transmission to Drive position 2 onmore severe grades. Electronic Speed Control –...

Recreational Towing Procedure WARNING! You or others could be injured if you leave thevehicle unattended with the transfer case in theNEUTRAL position without first fully engaging theparking brake. The transfer case NEUTRAL positiondisengages both the front and rear driveshafts fromthe powertrain an...

7. After the shift is completed and the NEUTRAL lightcomes on, release the NEUTRAL button. 8. Start the engine. 9. Shift the transmission into REVERSE. 10. Release the brake pedal for five seconds and ensurethat there is no vehicle movement. 11. Repeat Steps 9 and 10 with the transmission inDRIVE. 1...

longer met during the four second timer, then theNEUTRAL indicator light will flash continuously untilall requirements are met or until the NEUTRAL buttonis released. • The ignition key must be ON for a shift to take placeand for the position indicator lights to be operable. Ifthe key in not ON, the...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . 336 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 337 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . 337 ▫ Removing The Spare Tire . . . . . . . . . . . . . . . 339 ▫ Tire Changing ...

HAZARD WARNING FLASHER The Hazard Warning flasher switch is located on the topof the steering column, just behind the steering wheel. Press the switch to turn on the Hazard Warningflasher. When the switch is activated, all directionalturn signals will flash on and off to warn oncoming traffic of an ...

Jack Screw Jack Stowage Location (Crew Cab) 338 WHAT TO DO IN EMERGENCIES

WARNING! The jack is designed as a tool for changing tires only.The jack should not be used to lift the vehicle forservice purposes, unless suitable supports are placedunder the vehicle as a safety measure. The vehicleshould be jacked on a firm level surface only. Avoidicy or slippery areas. Removin...

• Rotate clockwise to stow the spare tire. Inserting Lug Wrench and Extension Turning Lug Wrench and Extension 340 WHAT TO DO IN EMERGENCIES

It is recommended that you stow the flat or spare toavoid tangling the loose cable. NOTE: The winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or otherpower tools is not recommended and can damage thewinch. Tire Changing Procedure WARNING! Getting under a j...

Instructions WARNING! Carefully follow these tire changing warnings tohelp prevent personal injury or damage to yourvehicle: • Always park on a firm, level surface as far fromthe edge of the roadway as possible before raisingthe vehicle. • Turn on the Hazard Warning flasher. • Block the wheel diagon...

1. Lower and remove the spare wheel, jack, and toolsfrom stowage. 2. Using the wheel wrench, loosen, but do not remove,the wheel nuts by turning them counterclockwise oneturn while the wheel is still on the ground. 3. When changing a front wheel, place the jack under theframe rail behind the wheel. ...

NOTE: To Stow the Flat or Spare: Wheel retainer does not fit through the center of the aluminum wheel. The tiremust be stored in a safe manner in the bed of the truck. JUMP-STARTING PROCEDURES If your vehicle has a discharged battery it can be jump-started using a set of jumper cables and a battery ...

Preparations for Jump-Start The battery in your vehicle is located in the front of theengine compartment, behind the left headlight assembly. WARNING! • Take care to avoid the radiator cooling fan when-ever the hood is raised. It can start anytime theignition switch is on. You can be injured bymovin...

3. If using another vehicle to jump-start the battery, parkthe vehicle within the jumper cables reach, set theparking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as thiscould establish a ground connection and personalinjury could result. Jump-Starting ...

FREEING A STUCK VEHICLE If vehicle becomes stuck in snow, sand, or mud, it canoften be moved by a rocking motion. Move the shift leverrhythmically between FIRST and REVERSE, while apply-ing slight pressure to the accelerator. CAUTION! Racing the engine or spinning the wheels may lead totransmission ...

CAUTION! Revving the engine or spinning the wheels too fastmay lead to transaxle overheating and failure. It canalso damage the tires. Do not spin the wheels above30 mph (48 km/h). Do not spin the wheels continu-ously for more than 30 seconds. EMERGENCY TOW HOOKS — IF EQUIPPED Your vehicle may be eq...

WARNING! • Chains are not recommended for freeing a stuckvehicle. Chains may break, causing serious injuryor death. • Stand clear of vehicles when pulling with towhooks. Tow straps and chains may break, causingserious injury. CAUTION! Tow hooks are for emergency use only, to rescue avehicle stranded...

Two-Wheel Drive Vehicles Provided that the transmission is operable, tow with thetransmission in NEUTRAL and the ignition key in theOFF position, along with the front wheels raised and therear wheels on the ground. The speed must not exceed30 mph (50 km/h), and the distance must not exceed15 miles (...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.7L . . . . . . . . . . . . . 359 䡵 Engine Compartment — 4.7L . . . . . . . . . . . . . 360 䡵 Onboard Diagnostic System — OBD II . . . . . . 361 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 361 䡵 Emissions Inspection And MaintenanceP...

▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 375 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 380 ▫ Automatic Transmission . . . . . . . . . . . . . . . 382 ▫ Transfer Case . . . . . . . . . . . . . . . . . . . . . . . 385 ▫ Front/Rear Axle Fluid . . . . . . . . . . . ....

ENGINE COMPARTMENT — 3.7L 1 — Air Cleaner Filter 7 — Power Steering Fluid Reservoir 2 — Automatic Transmission Dipstick 8 — Engine Oil Fill 3 — Engine Oil Dipstick 9 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 10 — Washer Fluid Reservoir 5 — Power Distribution Center 11 — Engine Coolant Reservo...

ENGINE COMPARTMENT — 4.7L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic Transmission Dipstick 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 10 — Washer Fluid Reservoir 5 — Power Distribution Center 11 — Engine Coolant Reservo...

the message will appear the next time the vehicle isstarted. This might indicate a damaged cap. If the prob-lem is detected twice in a row, the system will turn on theMIL. Resolving the problem will turn the MIL off. EMISSIONS INSPECTION AND MAINTENANCEPROGRAMS In some localities, it may be a legal ...

your vehicle. Refer to these Service Manuals beforeattempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civilpenalties being assessed against you. WARNING! You can be badly injured working on or around amotor vehicle...

WARNING! The air induction system (air cleaner, hoses, etc) canprovide a measure of protection in the case of enginebackfire. Do not remove the air induction system (aircleaner, hoses, etc.) unless such removal is necessaryfor repair or maintenance. Make sure that no one isnear the engine compartmen...

Air Conditioner Maintenance For best possible performance, your air conditionershould be checked and serviced by an authorized dealerat the start of each warm season. This service shouldinclude cleaning of the condenser fins and a performancetest. Drive belt tension should also be checked at thistim...

Refrigerant Recovery and Recycling R-134a air conditioning refrigerant is a hydrofluoro-carbon (HFC) that is endorsed by the EnvironmentalProtection Agency (EPA), and is an ozone-saving prod-uct. However, the manufacturer recommends that airconditioning service be performed by authorized dealersor o...

Avoid using the wiper blades to remove frost or ice fromthe windshield. Keep the blade rubber out of contact withpetroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and frequency of use. Poorperformance of blades may be ...

CAUTION! (Continued) • This vehicle has not been designed for use withPropylene Glycol-based engine coolant (anti-freeze). Use of Propylene Glycol-based enginecoolant (antifreeze) is not recommended. Adding Coolant Your vehicle has been built with an improved enginecoolant (antifreeze) that allows e...

NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) andwill require more frequent coolant changes. Cooling System Pressure Cap The cap must be fully tightened to prevent the loss ofengine coolant (antifreeze), and to ensure that the enginecoolant ...

Disposal of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) isa regulated substance, requiring proper disposal. Checkwith your local authorities to determine the disposalrules for your community. To prevent ingestion by ani-mals or children do not store ethylene glycol-bas...

If an examination of your engine compartment shows noevidence of radiator or hose leaks, the vehicle may besafely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check the coolant freeze point in the radiator and inthe coolant recovery bottle. If antifreeze ne...

Special Additives Automatic Transmission Fluid (ATF) is an engineeredproduct and its performance may be impaired by supple-mental additives. Therefore, do not add any fluid addi-tives to the transmission. The only exception to thispolicy is the use of special dyes to aid in detecting fluidleaks. In ...

6. Remove the dipstick again and note the fluid level onboth sides. The fluid level should be between the “HOT”(upper) reference holes on the dipstick at normal operat-ing temperature. Verify that solid coating of oil is seen onboth sides of the dipstick. If the fluid is low, add asrequired into the...

Front/Rear Axle Fluid For normal service, periodic fluid level checks are notrequired. When the vehicle is serviced for other reasonsthe exterior surfaces of the axle assembly should beinspected. If gear oil leakage is suspected inspect thefluid level. Refer to “Fluids, Lubricants, and GenuineParts”...

• Avoid using abrasive compounds and power buffingthat may diminish the gloss or thin out the paintfinish. CAUTION! • Do not use abrasive or strong cleaning materialssuch as steel wool or scouring powder, which willscratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi(8 274 ...

Underhood Fuses (Power Distribution Center) Your vehicle is equipped with an electrical power distri-bution center located on the left side of the enginecompartment. This center contains cartridge fuses, mini fuses andrelays. A description of each fuse and component may bestamped on the inside cover...

Cavity Cartridge Fuse Mini- Fuse Description 57 20 AmpYellow Airbag System # 2 58 20 AmpYellow Heated Seats 59 10 AmpRed Climate Control Sys-tem Module 60 10 AmpRed Antilock Brakes Mod-ule 61 20 AmpYellow Body Control Module3 (Reverse Lamps) VEHICLE STORAGE If you are storing your vehicle for more t...

LIGHT BULBS – Exterior Bulb No. Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H13 Front Park/Turn/Side Marker . . . . . . . . . . . . 3157NA Back-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3157 Center High Mounted Stop Lamp . . . . . . . . . . . . . 921 Fog L...

5. Twist 1/4-turn and remove headlamp bulb from hous-ing and replace. NOTE: The headlamp bulb is a halogen bulb. Take care not to touch the bulb with your fingers. Body oils fromyour fingers could cause excessive heat buildup whichreduces bulb life. To remove the park/turn signal bulb, rotate bulb s...

Rear Side Marker, Taillamps/Stop Lamps, AndTurn Signal Bulbs 1. Remove the two screws that pass through the bedsheet metal. 2. Pull the taillamp housing straight out from the body. 7 MAINTAINING YOUR VEHICLE 399

License Lamps 1. Using a screwdriver, pry black rubber housing fromthe bumper. 2. Rotate the socket 1/4-turn counterclockwise. 404 MAINTAINING YOUR VEHICLE

3. Pull bulb from socket. 4. Reverse this procedure for installation. Fog Lamps 1. Disconnect connector from the fog lamp by raising thewire harness lock tab and pulling on wire harnessconnector. 2. Rotate the bulb 1/4-turn counterclockwise and pull toremove from the fog lamp housing. 3. Reverse pro...

FLUID CAPACITIES U.S. Metric Fuel (Approximate) 22 Gallons 83 Liters Engine Oil with Filter 3.7L Engine (SAE 5W-20, API Certified) 5 Quarts 4.7 Liters 4.7L Engine (SAE 5W-20, API Certified) 6 Quarts 5.7 Liters Cooling System (Includes 2.1 Quarts/2 Liters forCoolant Bottle) 3.7L Engine (MOPAR 威 Antif...

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . 410 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 410 ▫ Required Maintenance Intervals . . . . . . . . . . 412 8 M A I N TE N A N C E SC H E DU LE S

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensurethe continued proper functioning of the emissions controlsystem. These and all other maintenance services in-cluded in this manual, should be done to p...

• Check all lights and other electrical items for correctoperation. At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance itemsmay result in damage to the vehicle. Required Maintenance Intervals NOTE: ** Vehicles ...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427 ▫ Prepare For The Appointment . . . . . . . . . . . 427 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 427 ▫ Be Reasonable With R...

This is why you should always talk to an authorizeddealer’s service manager first. Most matters can be re-solved with this process. • If for some reason you are still not satisfied, talk to thegeneral manager or owner of the authorized dealer-ship. They want to know if you need assistance. • If an a...

Customer Assistance For The Hearing Or SpeechImpaired (TDD/TTY) To assist customers who have hearing difficulties, themanufacturer has installed special TDD (Telecommuni-cation Devices for the Deaf) equipment at its customercenter. Any hearing or speech impaired customer, whohas access to a TDD or a...

We appreciate that you have made a major investmentwhen you purchased the vehicle. An authorized dealerhas also made a major investment in facilities, tools, andtraining to assure that you are absolutely delighted withthe ownership experience. You’ll be pleased with theirsincere efforts to resolve a...

If NHTSA receives similar complaints, it may open aninvestigation, and if it finds that a safety defect exists ina group of vehicles, it may order a recall and remedycampaign. However, NHTSA cannot become involved inindividual problems between you, your authorizeddealer, and the manufacturer. To con...

Temperature Grades The temperature grades are A (the highest), B, and C,representing the tire’s resistance to the generation of heatand its ability to dissipate heat, when tested undercontrolled conditions on a specified indoor laboratorytest wheel. Sustained high temperature can cause thematerial o...

Adding Engine Coolant (Antifreeze) . . . . . . . . . . 377Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 311Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 367Air Conditioner Maintenance . . . . . . . . . . . . . . . 370Air Conditioning . . . . . . . . . . . . . . . . . . . ...

Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . 255 Special Additives . . . . . . . . . . . . . . . . . . . . . . 383Torque Converter . . . . . . . . . . . . . . . . . . . . . . 259 Axle Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408Axle Lubrication (Axle Fluid) . ...

Changing A Flat Tire . . . . . . . . . . . . . . . . . . . . . 337Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . 279Check Engine Light(Malfunction Indicator Light) . . . . . . . . . . . . . . . 362Checking Your Vehicle For Safety . . . . . . . . . . . . . 76Checks, Safety . . . ....

Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Fog . . . . . . . . . . . . . . . . . . . . . . . . . . 136,185,405Hazard Warning Flasher . . . . . . . . . . . . . . . . . 336Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . 135High Beam . . . . . . . . . . . . ...

Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . 366,406 Onboard Diagnostic System . . . . . . . . . . . . . . 361,362Opener, Garage Door (HomeLink 威 ) . . . . . . . . . . . 155 Operator Manual (Owner’s Manual) . . . . ....

Signals, Turn . . . . . . . . . . . . . . . . . . . 79,138,179,399Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 294Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295Spare Tire . . . . . . . . . . ....

Chrysler Group LLC O W N E R ’ S M A N U A L 2 0 1 1 2 0 1 1 D A K O T A First Edition Printed in U.S.A. DAKOTA 11ND33-126-AB