Dodge 2010 Ram Chassis Cab - Manuals

A MESSAGE FROM CHRYSLER GROUP LLC Chrysler Group LLC and Cummins 威 welcome you as a Cummins 威 turbocharged diesel-powered truck owner. Your diesel truck will sound, feel, drive, and operatedifferently from a gasoline-powered truck. It is importantthat you read and understand this manual. Almost 100%...

This information cannot be erased and will stay in thesystem’s memory even if the modification is removed.This information can be retrieved by Chrysler GroupLLC, and service and repair facilities, when servicingyour vehicle. This information may be used to determineif repair will be covered by warra...

WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in an accident orbodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If youdo not read this entire manual, you may miss importantinforma...

VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is found on theleft front corner of the instrument panel, visible throughthe windshield. This number also appears on the Auto-mobile Information Disclosure Label affixed to a windowon your vehicle, the vehicle registration and tit...

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Locking Doors With A Key . . . . . . . . . . . . . . 13 䡵 Steering Wheel Lock — If Equipped . . . . . . . . . 14 ▫ To Man...

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has thekey code numbers for your vehicle locks. These numberscan be used to order duplicate keys from your authorizeddealer. Ask your authorized dealer for these numbersand keep them in a safe place. Ignition Key Removal Automat...

NOTE: • If you try to remove the key before you place the shiftlever in PARK, the key may become trapped tempo-rarily in the ignition cylinder. If this occurs, rotate thekey to the right slightly, then remove the key asdescribed. If a malfunction occurs, the system will trapthe key in the ignition c...

STEERING WHEEL LOCK — IF EQUIPPED Your vehicle may be equipped with a passive steeringwheel lock. This lock prevents steering the vehicle with-out the key fob. If the steering wheel is moved approxi-mately a half turn in either direction and the key fob isnot in the ignition switch, the steering whe...

During normal operation, after turning on the ignitionswitch, the Vehicle Security Light will turn on for threeseconds for a bulb check. If the light remains on after thebulb check, it indicates that there is a problem with theelectronics. In addition, if the Vehicle Security Lightbegins to flash af...

To Set the Alarm The Vehicle Security Alarm will set when you use thepower door locks, or use the Remote Keyless Entry (RKE)transmitter to lock the doors. After all the doors arelocked and closed, the Vehicle Security Light in theinstrument cluster will flash rapidly to signal that theVehicle Securi...

ILLUMINATED ENTRY — IF EQUIPPED The courtesy lights will turn on when you use theRemote Keyless Entry (RKE) transmitter or open thedoors. This feature is only available if you have RemoteKeyless Entry. The lights will fade to off after approximately 30 seconds,or they will immediately fade to off on...

To Unlock the Doors Press and release the UNLOCK button on the RKEtransmitter once to unlock only the driver’s door or twiceto unlock all the doors. When the UNLOCK button ispressed, the illuminated entry will initiate, the parkinglights will flash on twice and, if installed, the cargo lampwill turn...

3. Continue to hold the LOCK button, wait at least4 seconds, but no longer than 10 seconds, then press andhold the PANIC button. Release both buttons at the sametime. 4. To reactivate this feature, repeat the above steps. This vehicle is shipped from the assembly plant with thepark lamp flash featur...

General Information This device complies with part 15 of FCC rules and withRS-210 of Industry Canada. Operation is subject to thefollowing conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may bereceived including interference that may ca...

• Ignition key removed from ignition switch • Battery at an acceptable charge level • RKE PANIC button not pressed WARNING! • Do not start or run an engine in a closed garage orconfined area. Exhaust gas contains Carbon Mon-oxide (CO) which is odorless and colorless. Car-bon Monoxide is poisonous an...

The ignition key will unlock all the locks on your vehicle. WARNING! • For personal security and safety in the event of anaccident, lock the vehicle doors when you drive aswell as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leavingunattended children in a vehicle ...

Automatic Door Locks – If Equipped If this feature is enabled, your door locks will lockautomatically when the vehicle’s speed exceeds 15 mph(24 km/h). Automatic Door Lock Programming This feature is enabled when your vehicle is shippedfrom the assembly plant and can be disabled by using thefollowin...

2. Fasten your seat belt. (Fastening the seat belt willcancel any chimes that may be confusing during thisprogramming procedure.) 3. Insert the key into the ignition. 4. Within 15 seconds, cycle the key from the LOCKposition to the ON/RUN position a minimum of fourtimes, ending in the ON/RUN positio...

To use the system, open each rear door, slide the lever UPto engage the locks and DOWN to disengage the childprotection door locks. When the system on a door isengaged, that door can only be opened by using theoutside door handle even, if the inside door LOCK is inthe UNLOCKED position. WARNING! Avo...

WINDOWS Power Windows – If Equipped The control on the left front door panel has up-downswitches that give you fingertip control of all powerwindows. There is a single opening and closing switch onthe front passenger door for passenger window control and on the rear doors of Quad Cab 威 models. The w...

Auto-Down (Driver’s Side Only) The driver’s window switch has an Auto-Down feature.Press the window switch past the detent, release, and thewindow will go down automatically. Window Lockout Switch (4-Door Models Only) The window lockout switch on the driver’s door allowsyou to disable the window con...

occurs with the rear windows open, open the front andrear windows together to minimize the buffeting. OCCUPANT RESTRAINTS Some of the most important safety features in yourvehicle are the restraint systems: • Three-point lap and shoulder belts for the driver andall passengers • Advanced Front Airbag...

Buckle up even though you are an excellent driver, evenon short trips. Someone on the road may be a poor driverand cause a collision that includes you. This can happenfar away from home or on your own street. Research has shown that seat belts save lives, and theycan reduce the seriousness of injuri...

WARNING! • Wearing a seat belt incorrectly is dangerous. Seatbelts are designed to go around the large bones ofyour body. These are the strongest parts of yourbody and can take the forces of a collision best.Wearing your belt in the wrong place could makeyour injuries in a collision much worse. You ...

3. When the belt is long enough to fit, insert the latchplate into the buckle until you hear a “click.” 1 — Latch Plate Latch Plate To Buckle 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35

WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t beat the strong hip and pelvic bones, but across yourabdomen. Always wear the lap belt as low as pos-sible and keep it snug. • A twisted belt can’t do its job as well. In a collision, i...

WARNING! A frayed or torn belt could rip apart in a collision andleave you with no protection. Inspect the belt systemperiodically, checking for cuts, frays, or loose parts.Damaged parts must be replaced immediately. Donot disassemble or modify the system. Seat beltassemblies must be replaced after ...

panel and insert it into the black keyed buckle until thereis an audible “click”. For proper seatbelt usage, refer“Lap/Shoulder Belt Operating Instructions” in thissection. WARNING! • If the black latch and black buckle are not prop-erly connected when the seat belt is used by anoccupant, the seat b...

WARNING! • If the black latch and black buckle are not prop-erly connected when the seat belt is used by anoccupant, the seat belt will not be able to provideproper restraint and will increase the risk of injuryin a collision. • When reattaching the black latch and blackbuckle, ensure the seat belt ...

away from your neck. Press the button located on theupper belt guide, and then move it up or down to theposition that fits you best. As a guide, if you are shorter than average you willprefer a lower position, and if you are taller than average you will prefer a higher position. When you release the...

2. Grasp the shoulder portion and pull downward untilthe entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you willhear a clicking sound. This indicates the safety belt isnow in the Automatic Locking Mode. How To Disengage The Automatic Locking Mode Disconnect the combina...

BeltAlert 威 will be reactivated if the driver’s seat belt is unbuckled for more than 10 seconds and the vehiclespeed is greater than 5 mph (8 km/h). BeltAlert 威 can be enabled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the first 60 ...

the second stage determines whether the output force islow, medium, or high. If a low output is sufficient to meetthe need, the remaining gas in the inflator is expended. WARNING! • Do not put anything on or around the airbagcovers or attempt to open them manually. You maydamage the airbags and you ...

It also includes diagnostics that will illuminate the instru-ment cluster Airbag Warning Light if a malfunction isnoted. The diagnostics also record the nature of themalfunction. WARNING! Ignoring the Airbag Warning Light in your instru-ment panel could mean you won’t have the airbags toprotect you ...

Enhanced Accident Response System In the event of an impact causing airbag deployment, ifthe communication network remains intact, and thepower remains intact, depending on the nature of theevent the ORC will determine whether to have theEnhanced Accident Response System perform the follow-ing funct...

Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag systemcould cause it to fail when you need it. You couldbe injured if the airbag system is not there toprotect you. Do not modify the components orwiring, including adding any kind of badges orstickers to the steering ...

Airbag Warning Light You will want to have the airbags ready toinflate for your protection in a collision. Whilethe airbag system is designed to be mainte-nance free, if any of the following occurs, have an authorized dealer service the system immediately. • The Airbag Warning Light does not come on...

3. Requested by police under a legal warrant. 4. Otherwise required by law. Data parameters that are recorded: • Diagnostic trouble code(s) and warning light status forelectronically-controlled safety systems, including theairbag system • Vehicle speed • Engine RPM • Brake switch status • Pedal posi...

cannot sit with knees bent over the vehicle’s seatcushion while the child’s back is against the seat back,they should use a belt-positioning booster seat. Thechild and booster seat are held in the vehicle by thelap/shoulder belt. NOTE: For additional information, refer to www.seatcheck.org or call 1...

• The restraint must be appropriate for your child’sweight and height. Check the label on the restraint forweight and height limits. • Carefully follow the instructions that come with therestraint. If you install the restraint improperly, it maynot work when you need it. • The passenger seat belts a...

• Buckle the child into the seat according to the childrestraint manufacturer’s directions. • When your child restraint is not in use, secure it in thevehicle with the seat belt or remove it from the vehicle.Do not leave it loose in the vehicle. In a sudden stop orcollision, it could strike the occu...

WARNING! Improper installation of a child restraint to theLATCH anchorages can lead to failure of an infant orchild restraint. The child could be badly injured orkilled. Follow the manufacturer’s directions exactlywhen installing an infant or child restraint. Child Restraint Tether Anchor Child rest...

2. Lift the cover (if so equipped), and attach the hook tothe square opening in the sheet metal. 3. Install the child restraint and remove the slack in thetether strap according to the manufacturer’s instructions. Multiple Child Restraint Installation Sequence(Quad Cab 威 - Rear Seats) 1. Obtain teth...

5. Place a child restraint on the center rear seat andadjust the tether strap so that it will reach under the headrestraint to the tether anchor directly behind the seat andto the anchor directly behind the right seat. 6. Install each child restraint and remove the slack in thetether strap according...

Tether Anchorage Points at All Three SeatingPositions 1. Place the child restraint on the seat and adjust thetether strap so that it will reach over the seat back underthe head restraint to the tether anchor directly behind theseat. 2. Lift the cover, and attach the hook to the squareopening in the ...

Children Too Large for Booster Seats Children who are large enough to wear the shoulder beltcomfortably, and whose legs are long enough to bendover the front of the seat when their back is against theseat back should use the lap/shoulder belt in a rear seat. • Make sure that the child is upright in ...

• Warm up the engine before placing it under load. • Do not operate the engine at idle for prolongedperiods. • Use the appropriate transmission gear to preventengine lugging. • Observe vehicle oil pressure and temperature indica-tors. • Check the coolant and oil levels frequently. • Vary throttle po...

Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbonmonoxide (CO), which is colorless and odorless.Breathing it can make you unconscious and caneventually poison you. To avoid breathing (CO)follow these safety tips: Do not run the engine in a closed garage or in confinedareas a...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 79 ▫ Automatic Dimming Mirror — If Equipped . . . 80 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 80...

䡵 Voice Recognition (VR) System —If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 ▫ Voice Recognition (VR) System Operation . . . . 111 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 113 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 116 䡵 Seats . . . ....

䡵 Windshield Wipers And Washers . . . . . . . . . . 131 ▫ Intermittent Wiper System . . . . . . . . . . . . . . 131 ▫ Windshield Washers . . . . . . . . . . . . . . . . . . 132 䡵 Tilt Steering Column . . . . . . . . . . . . . . . . . . . 132 䡵 Electronic Speed Control — If Equipped . . . . . 134 ▫ T...

䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 ▫ Center Storage Compartment(40–20–40 Seat) — If Equipped . . . . . . . . . . . 152 ▫ Center Storage Compartment(Bucket Seats) — If Equipped . . . . . . . . . . . . 154 ▫ Storage And Seats (Quad Cab 威 Models) . . . . 156 ▫ Plast...

MIRRORS Inside Day/Night Mirror Headlight glare can be reduced by moving the smallcontrol under the mirror to the night position (toward therear of the vehicle). The mirror should be adjusted whileset in the day position (toward the windshield). Themirror should be adjusted to center on the view thr...

Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glarefrom vehicles behind you. You can turn the feature on oroff by pressing the button at the base of the mirror. A lightnext to the button will illuminate to indicate when thedimming feature is activated. CAUTIO...

WARNING! Vehicles and other objects seen in a passenger sideconvex mirror will look smaller and farther awaythan they really are. Relying too much on yourpassenger side convex mirror could cause you tocollide with another vehicle or other object. Use yourinside mirror when judging the size or distan...

Select the left or right mirror using the top switch, thenpress one of the four arrows on the bottom switch toadjust the mirror. Once the mirror is adjusted, set the topswitch to the center (off) position to prevent accidentallymoving a mirror. Heated Mirrors — If Equipped The heated mirror button i...

NOTE: Fold the trailer towing mirrors rearward prior to entering an automated car wash. A small blindspot mirror is integrated onto the mainmirror surface. uconnect™ phone — IF EQUIPPED uconnect™ phone is a voice-activated, hands-free, in-vehicle communications system. uconnect™ phone al-lows you to...

WARNING! Any voice commanded system should be used onlyin safe driving conditions following local laws andphone use. All attention should be kept on theroadway ahead. Failure to do so may result in anaccident causing serious injury or death. Phone Button Depending on the vehicle options, either ther...

• The uconnect™ system will confirm the name andthen dial the corresponding phone number, whichmay appear in the display of certain radios. Add Names to Your uconnect™ Phonebook NOTE: Adding names to the uconnect™ phonebook is recommended when the vehicle is not in motion. • Press the button to begi...

• You will then be asked for the name of the phonebookentry that you wish to edit. • Next, choose the number designation (home, work,cellular, or pager) that you wish to edit. • When prompted, recite the new phone number for thephonebook entry that you are editing. After you are finished editing an ...

• The uconnect™ phone will then prompt you as to thenumber designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through theuconnect™ phone if the feature(s) are available on yourcellular service plan. For example, if your cell...

After selecting one of the languages, all prompts andvoice commands will be in that language. NOTE: After every uconnect™ phone language change operation, only the language-specific 32-name phone-book is usable. The paired phone name is not language-specific and usable across all languages. Emergenc...

Working with Automated Systems This method is used in instances where one generally hasto press numbers on the cellular phone keypad whilenavigating through an automated telephone system. You can use your uconnect™ phone to access a voice mailsystem or an automated service, such as a paging serviceo...

• Even though international dialing for most numbercombinations is supported, some shortcut dialingnumber combinations may not be supported. • In a convertible vehicle, system performance may becompromised with the convertible top down. Phone Far End Audio Performance • Audio quality is maximized un...

General Information This device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • Changes or modifications not expressly approved bythe party responsible for compliance could void theuser’s authority to operate the equipment. • T...

Disc To switch to the disc mode, say “Disc”. In this mode, youmay say the following commands: • “Track” (#) (to change the track) • “Next Track” (to play the next track) • “Previous Track” (to play the previous track) • “Main Menu” (to switch to the main menu) Memo To switch to the voice recorder mo...

WARNING! • It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision, peopleriding in these areas are more likely to be seri-ously injured or killed. • Do not allow people to ride in any area of yourvehicle that is not equipped with seats and seatbelts. • Be su...

WARNING! Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seat couldcause you to lose control. The seat belt might not beproperly adjusted and you could be injured. Onlyadjust a seat while the vehicle is parked. Reclining Seats The recliner handle is on the outsid...

WARNING! You can be seriously, even fatally, injured riding in aseat with the seatback reclined. Do not ride with theseatback reclined so that the shoulder belt is nolonger resting against your chest. If you ride in thisposition, the shoulder harness will no longer berestraining you. In a collision ...

Manual Rotary Lumbar Support Adjustment —If Equipped Rotating the lumbar control knob on the left-side of thedriver’s seatback and on the right side of the passenger’sseatback increases or decreases the lumbar (lower back)support. Power Seats — If Equipped The power seat controls are on the outboard...

CAUTION! DO NOT place any article under a power seat orimpede its ability to move as it may cause damage tothe seat controls. Seat travel may become limited ifmovement is stopped by an obstruction in the seat’spath. The four-way switch is used to move the seat cushionforward or backward, or to adjus...

The angle, or tilting, of the seat cushion can be adjustedusing the two toggle switches. Use the forward switch toraise or lower the front seat cushion. Use the rear switchto raise or lower the rear of the seat cushion. Heated Seats — If Equipped The heated seat switches are located on the instrumen...

TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 1. Pull the hood release lever located below the steeringwheel at the base of the instrument panel. 2. Reach into the opening beneath the center of the grilleand push upward on the safety latch to release it beforeraising the...

CAUTION! To prevent possible damage, do not slam the hood toclose it. Use a firm downward push at the front centerof the hood to ensure that both latches engage. WARNING! Be sure the hood is fully latched before driving yourvehicle. If the hood is not fully latched, it could openwhen the vehicle is ...

Interior Lights Courtesy and dome lights are turned on when the frontdoors are opened, when the dimmer control (rotatingwheel on the right side of the switch) is rotated to theupward detent position, or if equipped, when the UN-LOCK button is pressed on the Remote Keyless Entry(RKE) transmitter. Whe...

Battery Saver To protect the life of your vehicle’s battery, load sheddingis provided for both the interior and exterior lights. If the ignition is OFF and any door is left ajar for10 minutes or the dimmer control is rotated upwards for10 minutes, the interior lights will automatically turn off. If ...

Headlights, Parking Lights and Panel Lights When the headlight switch is rotated to the firstposition, the parking lights, tail lights, sidemarker lights, license plate light and instrument panel lights are all turned on. The headlights will turn onwhen the switch is rotated to the second position. ...

You can signal a lane change by moving the leverpartially up or down. Lane Change Assist Tap the lever up or down once and the turn signal (left orright) will flash three times then automatically turn off. Flash-to-Pass You can signal another vehicle with your headlights bypartially pulling the mult...

WINDSHIELD WIPERS AND WASHERS The wipers and washers are operated by a switch in themultifunction lever. Turn the end of the handle to selectthe desired wiper speed. Intermittent Wiper System The intermittent feature of this system was designed foruse when weather conditions make a single wiping cyc...

WARNING! Do not adjust the steering column while driving.Adjusting the steering column while driving or driv-ing with the steering column unlocked, could causethe driver to lose control of the vehicle. Be sure thesteering column is locked before driving your ve-hicle. Failure to follow this warning ...

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over accel-erator operation at speeds greater than 25 mph (40 km/h).The controls are mounted on the steering wheel. NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed t...

To Accelerate for Passing Depress the accelerator as you would normally. When thepedal is released, the vehicle will return to the set speed. NOTE: When driving uphill, at elevations above 2,000 ft (610 m), or when the vehicle is heavily loaded (especiallywhen towing) the vehicle may slow below the ...

OVERHEAD CONSOLE WITH ELECTRONICVEHICLE INFORMATION CENTER (EVIC) The overhead console contains dome/reading lights, andan Electronic Vehicle Information Center (EVIC). Dome/Reading Lights Located in the overhead console are two dome/readinglights. The dome/reading lights illuminate when a door isop...

Electronic Vehicle Information Center (EVIC) —If Equipped Pressing the MENU button will change thedisplay to one of the following features: Trip Functions Pressing the STEP button allows you to scroll throughone of the following Trip Function features: • TRIP – Shows the total distance traveled sinc...

• PERSONAL SETTINGS NOT AVAILABLE – Vehiclenot in PARK or Vehicle in Motion (Manual Transmis-sion Only) • LEFT/RIGHT FRONT DOOR AJAR (one or more,with a single chime if speed is above 1 mph (1.6 km/h) • LEFT/RIGHT REAR DOOR AJAR (one or more, witha single chime if speed is above 1 mph (1.6 km/h) • D...

scheduled oil change interval. The engine oil changeindicator system is duty cycle based, which means theengine oil change interval may fluctuate, dependentupon your personal driving style. NOTE: When prompted by the Engine Oil Change Indicator System, the engine oil and filter must bechanged. If no...

Cooler, and cleaning of the EGR Valve. The procedure forclearing and resetting the “Perform Service” indicatormessage is located in the appropriate service informa-tion. Refer to the “Maintenance Schedule” in Section 8 for theproper emission maintenance intervals. Personal Settings(Customer Programm...

• “RKE UNLOCK DRV DR 1st” – When DRV DR 1st is selected, only the driver’s door will unlock on the firstpress of the remote keyless entry UNLOCK button.When Driver Door 1st Press is selected, you mustpress the remote keyless entry UNLOCK button twiceto unlock the passenger’s doors. To make your sele...

• “KEY OFF POWER DELAY > OFF” – When thisfeature is selected, the power window switches, radio,hands–free system (if equipped), and power outletswill remain active for up to 10 minutes after theignition switch is turned OFF. Opening a vehicle doorwill cancel this feature. To make your selection, ...

Compass/Temperature Button Pressing the Compass/Temperature buttonwill return the display to the normal compass/temperature display. NOTE: Temperature accuracy can be affected from heat soak. For best accuracy, the vehicle should be driven at aspeed greater than 25 mph (40 km/h) for several min-utes...

Compass Variance Compass Variance is the difference between magneticNorth and Geographic North. In some areas of thecountry, the difference between magnetic and geographicNorth is great enough to cause the compass to give falsereadings. If this occurs, the compass variance must be setusing the follo...

4. Press and release RESET button until the propervariance zone is selected according to the map. 5. Press and release the Compass button to exit. ELECTRICAL POWER OUTLETS The auxiliary electrical power outlet can provide powerfor in-cab accessories designed for use with the standard“cigar lighter” ...

There is also a power outlet located on the rear of thecenter console (if equipped with bucket seats). The power outlet(s) has/have a fused direct feed fromthe battery so it/they receive power whether the ignitionis ON or OFF. All accessories connected to this/these power outlet(s)should be removed ...

CIGAR LIGHTER AND ASH RECEIVER The removable ash receiver is located in the instrumentpanel cupholder tray. The cigar lighter is located on the instrument panel,above and to the left of the ash receiver. As a child safety precaution, the lighter only operateswith the ignition switch ON. It heats whe...

Front Instrument Panel Cupholders(Bucket Seats) If your vehicle is equipped with bucket seats there arethree cupholders located on the front of the centerconsole. Rear Cupholder (Quad Cab 姞 ) — If Equipped Quad Cab 威 vehicles may be equipped with a rear cup- holder that consists of two cupwells for ...

WARNING! • This armrest is not a seat. Anyone seated on thearmrest could be seriously injured during vehicleoperation, or an accident. Only use the centerseating position when the armrest is fully upright. • In an accident, the latch may open if the totalweight of the items stored exceeds about 10 l...

CAUTION! • Many accessories that can be plugged in drawpower from the vehicle’s battery, even when not inuse (i.e., cellular phones, etc.). Eventually, ifplugged in long enough, the vehicle’s battery willdischarge sufficiently to degrade battery lifeand/or prevent engine starting. • Accessories that...

Plastic Grocery Bag Retainers Retainer hooks which will hold plastic grocery baghandles are built into the back panel of the cab, behindthe rear seat. FOLD FLAT LOAD FLOOR — IF EQUIPPED Quad Cab 威 models with a 60/40 rear seat may be equipped with a folding load floor. WARNING! Do not operate the ve...

Unfolding the Load Floor 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Grasp the knob on the load floor and lift the knob untilthe load floor unfolds into position. 3. Reverse the procedure to store the load floor. Unfolding The Load Floor Load Floor In Open Position 158 UNDERSTANDING...

Positioning the Load Floor for Storage Access Underthe Seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap located at either side of theload floor. 3. Lift the load floor up to access storage under the loadfloor. WARNING! Do not drive with the load floor in the...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 163 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 164 ▫ 6.7L Diesel Engine . . . . . . . . . . . . . . . . . . . 164 䡵 Instrument Cluster Description . . . . . . . . . . . . 165 䡵 El...

INSTRUMENT PANEL FEATURES 1 — Headlight Switch 6 — Passenger Airbag* 11 — TPMS “Light Load” Reset Switch* 16 — Transfer Case Control Switch* 2 — Air Outlets 7 — Glove Box 12 — Power Sliding Back Glass Switch* 17 — Parking Brake Release Lever 3 — Instrument Cluster 8 — Passenger Airbag On/Off Switch*...

INSTRUMENT CLUSTER 6.7L Diesel Engine 164 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTION 1. Check Gages Warning Light This light will illuminate when the voltmeter,engine oil pressure, or engine coolant temperature gauge indicates a reading either too high or too low.Examine the gauges carefully, and follow the instructionscontained below for each indicate...

8. Speedometer The speedometer shows the vehicle speed in miles perhour (mph) and/or kilometers per hour (km/h). 9. Oil Pressure Gauge The pointer should always indicate some oil pres-sure when the engine is running. A continuous high or low reading, under normal driving conditions,may indicate a lu...

CAUTION! Do not leave your vehicle unattended with the en-gine running, as you would not be able to react to thetemperature indicator if the engine overheats. NOTE: • Engine idle speed will automatically increase to 1,000RPM at elevated coolant temperatures to improveengine cooling. • If the gauge p...

service is required. Refer to “Overhead Console withElectronic Vehicle Information Center (EVIC)” in Sec-tion 3 for more information. 16. Front Fog Light Indicator Light — If Equipped This indicator will illuminate when the front foglights are on. 17. Malfunction Indicator Light (MIL) The Malfunctio...

19. Anti-Lock Brake (ABS) Warning Light This light monitors the Anti-Lock Brake System(ABS). The light will turn on when the ignitionswitch is turned to the ON position and maystay on for as long as four seconds. If the “ABS Warning Light” remains on or turns on whiledriving, it indicates that the A...

engine starting procedure for proper engine starting andoperating. Wait until the “Wait To Start Light” turns OFF,then start the vehicle. NOTE: The “Wait To Start Light” may not illuminate if the intake manifold temperature is warm enough. 27. Odometer/Trip Odometer Button Press this button to toggl...

When the ignition switch is in the OFF position, or whenthe radio frequency is being displayed, time keeping isaccurately maintained. On the RAQ radio the time button alternates the locationof the time and frequency on the display. On the REF onlyone of the two, time or frequency, is displayed at a ...

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOL control to turn the radio ON. Push theON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume...

NOTE: In Hands-Free Phone (if equipped) mode, the MUTE button mutes the microphone. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search forthe next listenable station in either, AM, FM, or Satellite(if equipped) frequencies, pausing for five seconds ateach listenable station...

TUNE Control (Radio Mode) Turn the rotary TUNE control clockwise to increase orcounterclockwise to decrease the frequency. AM/FM Button (Radio Mode) Press the button to select AM or FM modes. Setting the Tone, Balance, and Fade Press the rotary TUNE control, and “BASS” will display.Turn the TUNE con...

selected within five seconds after pressing the SET but-ton, the station will continue to play but will not bestored into pushbutton memory. You may add a second station to each pushbutton byrepeating the above procedure with this exception: Pressthe SET button twice and “SET 2” will show in thedisp...

Press and hold the FF button to fast forward through thetracks. Release the FF button to stop the fast forwardfeature. If the RW button is pressed, the current track willreverse to the beginning of the track and begin playing. RND/SET Button (Random Play Button)(CD Mode) Press this button while the ...

uconnect™ studios (SATELLITE RADIO) —IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast-ing technology to provide clear digital sound, coast tocoast. The subscription service provider is Sirius SatelliteRadio. This service offers over 130 channels of music,sports, news, entertai...

UP button until all 12 ESN/SID digits display. The SEEKDOWN will page down until the first four digits display.The radio will exit the ESN/SID mode when any otherbutton is pushed, the ignition is turned OFF, or fiveminutes have passed since any button was pushed. Selecting uconnect™ studios (Satelli...

Using The PTY (Program Type) Button —If Equipped Follow the PTY button instructions that apply to yourradio. PTY Button SCAN When the desired program type is obtained, press theSCAN button within five seconds. The radio will playseven seconds of the selected channel before moving tothe next channel ...

Reception Quality Satellite reception may be interrupted due to one of thefollowing reasons: • The vehicle is parked in an underground parkingstructure or under a physical obstacle. • Dense tree coverage may interrupt reception. • Driving under wide bridges or along tall buildings cancause intermitt...

The left-hand control is a rocker type switch with a pushbutton in the center. The function of the left-hand controlis different, depending on which mode you are in. The following describes the left-hand control operation ineach mode. Radio Operation Pressing the top of the left side switch will see...

6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may becometoo high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflectivecoating removed, a hair, moisture or dew on the disc)oversized, or have prote...

Heater Only — If Equipped The mode control (at the right of thecontrol panel) can be set in any of thefollowing positions: NOTE: To improve your selection choices, the system allows you to operate at intermediate positions betweenthe major modes. These intermediate positions are iden-tified by the s...

Recirculation Modes (Panel or Bi-Level) Select the recirculation modes whenthe outside air contains smoke orodors. This feature allows for recircu-lation of interior air only. Air flowsthrough the panel outlets in this mode.Air flows through the panel only orthrough both the panel and floor vents de...

Temperature Control The rotary knob at the center of thecontrol panel controls the temperatureof the interior air. You can choose yourdegree of comfort by rotating theknob. The coldest temperature settingis to the extreme left (blue region) andthe warmest setting is to the extreme right (red region)...

Air Conditioning Operation To turn on the air conditioning, set the fancontrol at any speed and press the snowflakebutton located at the right of the control panel.Conditioned air will be directed through the outlets selected by the mode control. A light in thesnowflake button shows that the air con...

Temperature Control The rotary knob at the center of thecontrol panel controls the temperatureof the interior air. You can choose yourdegree of comfort by rotating theknob. The coldest temperature settingis to the extreme left (blue region) andthe warmest setting is to the extreme right (red region)...

Operating Tips Chart 200 UNDERSTANDING YOUR INSTRUMENT PANEL

STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 205 ▫ Manual Transmission – If Equipped . . . . . . . 205 ▫ Automatic Transmission – If Equipped . . . . . 205 ▫ Normal Starting Procedure – EngineManifold Air TemperatureAbove 66°F (19°C) . . . . . . . . ....

䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 272 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 272 ▫ Avoid Using Contaminated Fuel . . . . . . . . . . 273 ▫ Bulk Fuel Storage . . . . . . . . . . . . . . . . . . . . 273 䡵 Vehicle Loading . . . . . . . . . . . . . . . . . ...

3. After engine start-up, check to see that there is oilpressure. 4. Allow the engine to idle about three minutes until themanifold heaters have completed the post-heat cycle. 5. Release the parking brake and drive. NOTE: • Engine idle speed will automatically increase to 1,000RPM at low coolant tem...

Starting Fluids WARNING! Starting fluids or flammable liquids are never to beused in the Cummins 威 diesel engine (see Warning label). Never pour diesel fuel, flammable liquid,starting fluids (ether) into the air cleaner canister, airintake piping, or turbocharger inlet in an attempt tostart the vehi...

engine control module. Post-heat operation can runfor several minutes, and then the electrical systemand voltmeter needle will stabilize. • The cycling action will cause temporary dimming ofthe headlamps, interior lamps, and also a noticeablereduction in blower motor speed. Cold Weather Precautions ...

• The engine requires the use of “Ultra Low Sulfur Diesel Fuel” . Use of incorrect fuel could result in engine and exhaust system damage. Refer to” Startingand Operating/Fuel Requirements” in this manual formore information. Engine Oil Usage Refer to “Maintaining Your Vehicle/Maintenance Proce-dures...

Your vehicle is equipped with a turbo speed limiter, thisfeature limits the engine speed to 1,200 RPM whenengine coolant temperatures are below 70°F (21°C). Thisfeature is designed to protect the turbo charger fromdamage and will only operate in PARK or NEUTRAL. If temperatures are below 32°F (0°C),...

NOTE: For EVIC messages related to the vehicle’s exhaust system, refer to “Maintaining Your Vehicle/Maintenance Procedures/Intervention Regeneration Strategy — EVIC Message Process Flow” in this manual. Idle-Up Feature — Automatic Transmission Only The optional driver-controlled high idle speed will...

Engine Speed Control CAUTION! Prevent overspeeding the engine going downhill.When descending steep grades, use a combination ofgears and service brakes to control vehicle/enginespeed. Overspeed can cause severe engine damage. Operating Precautions Avoid Overheating The Engine The temperature of the ...

• Up Steep Hills — Select a lower transmission gear, but try and keep thetorque converter clutch engaged. • Air Conditioning — Turn it off temporarily. Do Not Operate The Engine With Low OilPressure When the engine is at normal operating temperature, theminimum oil pressures required are: Idle 700 t...

ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant andpermits quicker starts in cold weather. Connect the heatercord to a ground-fault interrupter protected 110–115 VoltAC electrical outlet with a grounded, three-wire exten-sion cord. The engine block heater cord is route...

Once the switch is in the ON position and the vehicle ismoving faster than 5 mph (8 km/h); the exhaust brakewill automatically operate when the driver removespressure from the accelerator pedal. Exhaust braking ismost effective when the engine RPM is higher. The automatic transmission has been progr...

The purpose of the exhaust brake (engine braking) fea-ture is to supply negative (braking) torque to the engine.Typically, the engine braking is used for, but not limitedto, vehicle towing applications where vehicle braking canbe achieved by the internal engine power, thereby spar-ing the mechanical...

CAUTION! (Continued) • Before shifting into any gear, make sure your footis firmly on the brake pedal. WARNING! It is dangerous to move the shift lever out of PARK orNEUTRAL if the engine speed is higher than idlespeed. If your foot is not firmly on the brake pedal,the vehicle could accelerate quick...

DRIVE This position provides all forward gears, including fourthgear direct and fifth or sixth (if equipped) gear overdrive(refer to Overdrive Operation in this section). Use thisrange for most city and highway driving. THIRD Use this position for driving in slight heavy city traffic oron mountain r...

When To Use “TOW HAUL” and “O/D OFF”Modes When driving in hilly areas, towing a trailer, carrying aheavy load, etc., and frequent transmission shifting oc-curs, press the “TOW HAUL O/D OFF” switch once toselect TOW HAUL. This will improve performance andreduce the potential for transmission overheat...

• If the vehicle has not been driven in several days, thefirst few seconds of operation after shifting the trans-mission into gear may seem sluggish. This is due to thefluid partially draining from the torque converter intothe transmission. This condition is normal and will notcause damage to the tr...

Shifting Truck models with manual transmission are equippedwith a clutch interlocking ignition system. The clutchpedal must be fully pressed to start the vehicle. Fully press the clutch pedal before shifting gears. As yourelease the clutch pedal, lightly press the acceleratorpedal. This transmission...

vehicle speeds listed for acceleration. When heavilyloaded or pulling a trailer these recommended up-shiftspeeds may not apply. Maximum Recommended Up-shift Speeds Gear Selec- tion L to 2 2 to 3 3 to 4 4 to 5 5 to 6 Maxi- mum Speed 7 mph (11 km/h) 15 mph (24 km/h) 25 mph (40 km/h) 40 mph (64 km/h) 4...

Maximum Recommended Downshift Speeds CAUTION! Failure to follow the recommended downshiftingspeeds may cause the engine to overspeed and/ordamage the clutch disc even if the clutch pedal ispressed. Maximum Recommended Downshifting Speeds Gear Selec- tion 6 to 5 5 to 4 4 to 3 3 to 2 2 to L Maxi- mum ...

FOUR-WHEEL DRIVE OPERATION —IF EQUIPPED Manually Shifted Transfer Case OperatingInformation/Precautions The transfer case provides four mode positions. • Two-wheel drive high range (2H) • Four-wheel drive high range (4H) • Neutral (N) • Four-wheel drive low range (4L) This transfer case is intended ...

4H Four-Wheel Drive High Range - This range locks thefront and rear driveshafts together forcing the front andrear wheels to rotate at the same speed. Additionaltraction for loose, slippery road surfaces only. N Neutral - This range disengages the front and reardriveshafts from the powertrain. To be...

allow for an aftermarket upfit with a transmission drivenPTO (power take off). The customer will have the abilityto operate the PTO in either a “stationary” or “mobile”mode. The vehicles will be factory set to the “stationary”mode. In order to select the “mobile” mode an authorizeddealership is requ...

To operate the PTO via a remote switch the customermust make sure the above conditions are met. It is vitalfor proper operation that the PTO and remote have beeninstalled correctly, paying special attention to ensure thevehicle provided wiring has been connected properly.This is the responsibility o...

WARNING! On vehicles equipped with a limited-slip differentialnever run the engine with one rear wheel off theground since the vehicle may drive through the rearwheel remaining on the ground. You could losecontrol of the vehicle. Care should be taken to avoid sudden accelerations whenboth rear wheel...

Flowing/Rising Water WARNING! Do not drive on or across a road or path where wateris flowing and/or rising (as in storm run-off). Flow-ing water can wear away the road or path’s surfaceand cause your vehicle to sink into deeper water.Furthermore, flowing and/or rising water can carryyour vehicle awa...

POWER STEERING The standard power steering system will give you goodvehicle response and increased ease of maneuverabilityin tight spaces. The system will provide mechanicalsteering capability if power assist is lost. If for some reason the power assist is interrupted, it willstill be possible to st...

NOTE: The “Brake Warning Light” will come on and flash to indicate that the parking brake is applied. Youmust be sure that the parking brake is fully appliedbefore leaving the vehicle. Be sure the parking brake is firmly set when parked andthe shift lever is in the PARK position. When parking on a h...

WARNING! (Continued) • Be sure the parking brake is fully disengagedbefore driving, failure to do so can lead to brakeproblems due to excessive heating of the rearbrakes. When parking on a hill, turn the front wheels toward thecurb on a downhill grade and away from the curb on anuphill grade. The pa...

NOTE: • P (Passenger) - Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”molded into the sidewall preceding the size designa-tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on Europeandesign standards. Tires designed to this standard haveth...

Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = S...

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load correspondingto its load index under certain operating conditions— The maximum speed correspo...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire,however, the date code may only be on one side. Tireswith white sidewalls will have the full TIN, including thedate code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of bl...

Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can be carried in the vehicle2) total weight...

When adjusting inflation pressure to a tire and wheelassembly mounted on a vehicle, use a Remote MountAutomatic Inflation Kit or see your authorized dealer. NOTE: Never attempt to re-inflate a tire and wheel assembly which has been run flat or is extremely under-inflated without first removing the t...

Tread Wear Indicators Tread wear indicators are in the original equipment tiresto help you in determining when your tires should bereplaced. These indicators are molded into the bottom of the treadgrooves. They will appear as bands when the tread depthbecomes 1/16 in (2 mm). When the tread is worn t...

WARNING! Tires and spare tire should be replaced after six years,regardless of the remaining tread. Failure to followthis warning can result in sudden tire failure. Youcould lose control and have an accident resulting inserious injury or death. Keep dismounted tires in a cool, dry place with as litt...

CAUTION! Replacing original tires with tires of a different sizemay result in false speedometer and odometer read-ings. SUPPLEMENTAL TIRE PRESSUREINFORMATION — IF EQUIPPED A light load vehicle condition is defined as two passen-gers [150 lbs (68 kg) each] plus 200 lbs (91 kg) of cargo.Cold tire infl...

Refer to the “Maintenance Schedule” in Section 8 of thismanual for the proper maintenance intervals. More fre-quent rotation is permissible if desired. The reasons forany rapid or unusual wear should be corrected prior torotation being performed. NOTE: On Canadian vehicles only, if your vehicle is e...

ADDING FUEL CAUTION! To avoid fuel spillage and overfilling, do not “topoff” the fuel tank after filling. NOTE: • When the fuel nozzle “clicks” or shuts off, the fueltank is full. • Tighten the gas cap until you hear a “clicking” sound.This is an indication that the gas cap is properlytightened. • M...

WARNING! • Never have any smoking materials lit in or nearthe vehicle when the gas cap is removed or thetank filled. • Never add fuel to the vehicle when the engine isrunning. Avoid Using Contaminated Fuel Fuel that is contaminated by water or dirt can causesevere damage to the engine fuel system. P...

Improper weight distributions can have an adverse effecton the way your vehicle steers and handles and the waythe brakes operate. CAUTION! Do not load your vehicle any heavier than the GVWRor the maximum front and rear GAWR. If you do,parts on your vehicle can break, or it can change theway your veh...

measure GTW is to put your fully loaded trailer on avehicle scale. The entire weight of the trailer must besupported by the scale. Gross Combination Weight Rating (GCWR) The GCWR is the total permissible weight of your vehicleand trailer when weighed in combination. NOTE: The GCWR rating includes a ...

Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium Duty 3,500 lbs (1587 kg) Class III - Heavy Duty 5,000 lbs (2268 kg) Class IV - Extra HeavyDuty 10,000 lbs (4540 kg) Fifth Wheel/Gooseneck Greater than 10,000...

Never exceed the maximum tongue weight stamped onyour bumper or trailer hitch. Consider the following items when computing theweight on the rear axle of the vehicle: • The tongue weight of the trailer. • The weight of any other type of cargo or equipmentput in or on your vehicle. • The weight of the...

WARNING! (Continued) • Vehicles with trailers should not be parked on agrade. When parking, apply the parking brake onthe tow vehicle. Put the tow vehicle automatictransmission in PARK. With four-wheel drive ve-hicles, make sure the transfer case is not in NEU-TRAL. Always, block or ⴖ chock ⴖ the tr...

− When replacing tires, refer to “Tires – General Infor- mation” in this section. Replacing tires with a higherload carrying capacity will not increase the vehicle’sGVWR and GAWR limits. Towing Requirements – Trailer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your ve...

WARNING! (Continued) • Towing any trailer will increase your stoppingdistance. When towing you should allow for addi-tional space between your vehicle and the vehiclein front of you. Failure to do so could result in anaccident. Towing Requirements – Trailer Lights & Wiring Whenever you pull a tr...

Tow/Haul – If Equipped To reduce potential for automatic transmission overheat-ing, turn the “TOW HAUL OD/OFF” feature ON whendriving in hilly areas or shift the transmission to Driveposition 2 on more severe grades. Electronic Speed Control – If Equipped − Do not use in hilly terrain or with heavy ...

2. The total GVWR or the Front GAWR or the RearGAWR should never be exceeded. 3. The snowplow prep packages are not available withthe Sport Package. 4. Cargo capacity will be reduced by the addition ofoptions or passengers, etc. The loaded vehicle weight, including the snowplowsystem, all aftermarke...

Operating Tips Under ideal snow plowing conditions, 20 mph (32 km/h)should be maximum operating speed. The operatorshould be familiar with the area and surface to becleaned. Reduce speed and use extreme caution whenplowing unfamiliar areas or under poor visibility. NOTE: During snowplow usage on veh...

RECREATIONAL TOWING(BEHIND MOTORHOME, ETC.) CAUTION! Front or rear wheel lifts should not be used. Internaldamage to the transmission or transfer case will occurif a front or rear wheel lift is used when recreationaltowing. Recreational Towing – Two-Wheel Drive Models Recreational towing of two-whee...

CAUTION! Damage to the transmission may occur if the trans-mission is shifted into PARK with the transfer case inNEUTRAL and the engine running. With the transfercase in NEUTRAL ensure that the engine is OFF priorto shifting the transmission into PARK. Returning to Normal Operation — Manual ShiftTra...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . 296 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 297 ▫ 3500 Models — If Equipped . . . . . . . . . . . . . 297 ▫ Preparations For Jacking . . . . . . . . . . . . . . . 298 ▫ Jacking Instructions ...

HAZARD WARNING FLASHER The Hazard Warning flasher switch is mounted on thetop of the steering column. Press the switch to turn on the Hazard Warningflasher. When the switch is activated, all directionalturn signals will flash on and off to warn oncoming traffic of an emergency. Press the switch a se...

JACKING AND TIRE CHANGING WARNING! • Being under a jacked-up vehicle is dangerous. Thevehicle could slip off the jack and fall on you. Youcould be crushed. Never put any part of your bodyunder a vehicle that is on a jack. Never start or runthe engine while the vehicle is on a jack. If youneed to get...

WARNING! After using the jack and tools, always reinstall themin the original carrier and location. While drivingyou may experience abrupt stopping, rapid accelera-tion, or sharp turns. A loose jack, tools, bracket orother objects in the vehicle may move around withforce, resulting in serious injury...

6. Block both the front and rear of thewheel diagonally opposite the jackingposition. For example, if the right frontwheel is being changed, block the leftrear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking Instructions Instructions WARNING! Carefu...

WARNING! (Continued) • If working on or near a roadway, be extremelycareful of motor traffic. • To assure that spare tires, flat or inflated, aresecurely stowed, spares must be stowed with thevalve stem facing the ground. • Turn on the Hazard Warning flasher. 1. If equipped, remove the spare wheel, ...

When changing a rear wheel, assemble the jack drivetube to the jack and connect the drive tube to theextension tube. Securely place the jack under the swaybar bracket (unless both tires are flat on one side, thenplace jack under shock bracket) facing forward in vehicle.Connect the jack tube extensio...

8. Lower the jack to its fully closed position. If the jackwill not lower by turning the dial (thumbwheel) by hand,it may be necessary to use the jack drive tube in order tolower the jack. Stow the replaced tire, jack, and tools aspreviously described. 9. Adjust the tire pressure when possible. NOTE...

You must use the flat end of the lug wrench to pry off thewheel skins. Insert the flat tip completely and using aback and forth motion, loosen the wheel skin. Repeat thisprocedure around the tire until the skin pops off. Replace the wheel skins first using a rubber mallet. Whenreplacing the hub caps...

Dual wheel models require a special heavy-duty lug nuttightening adapter (included with the vehicle) to cor-rectly tighten the lug nuts. Also, when it is necessary toremove and install dual rear wheels, use a proper vehiclelifting device. NOTE: When installing a spare tire (if equipped) as part of a...

1. Tighten the wheel nuts in the numbered sequence to asnug fit. 2. Retighten the wheel nuts in the same sequence to thetorques listed in the table. Go through the sequence asecond time to verify that specific torque has beenachieved. Retighten to specifications at 100 miles(160 km) and after 500 mi...

2. Connect one end of the other jumper cable to negative(-) post of booster battery. Connect the other end of thejumper cable to a good ground on the engine block of the vehicle with the discharged battery. Make sure a goodconnection is made, free of dirt and grease. WARNING! • Do not connect the ca...

4. After the engine is started or if the engine fails to start,cables must be disconnected in the following order: a. Disconnect the negative cable at the engine ground. b. Disconnect the negative cable at the negative poston booster battery. c. Disconnect the cable from the positive post of bothbat...

FREEING A STUCK VEHICLE If the vehicle becomes stuck in snow, sand, or mud, it canoften be moved by a rocking motion. Move the shift leverrhythmically between DRIVE and REVERSE while ap-plying slight pressure to the accelerator. In general, the least amount of accelerator pedal pressureto maintain t...

WARNING! • Chains are not recommended for freeing a stuckvehicle. Chains may break, causing serious injuryor death. • Stand clear of vehicles when pulling with towhooks. Tow straps and chains may break, causingserious injury. CAUTION! Tow hooks are for emergency use only to rescue avehicle stranded ...

The manufacturer recommends towing with all wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of vehicle raised andthe opposite end on a towing dolly. Two-Wheel Drive Vehicles Provided that the transmission is operable, tow with thetransmission in NEUTRAL ...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 6.7L Diesel . . . . . . . . 317 䡵 Replacement Parts . . . . . . . . . . . . . . . . . . . . . 318 䡵 Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . 318 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 319 ▫ Engine Oil ...

▫ Automatic Transmission – If Equipped . . . . . 342 ▫ Noise Control System RequiredMaintenance & Warranty . . . . . . . . . . . . . . . 344 ▫ Appearance Care And Protection FromCorrosion . . . . . . . . . . . . . . . . . . . . . . . . . . 348 䡵 Fuses . . . . . . . . . . . . . . . . . . . . . . ...

ENGINE COMPARTMENT — 6.7L DIESEL 1 — Battery 8 — Washer Fluid Reservoir 2 — Engine Oil Fill 9 — Integrated Power Module 3 — Engine Oil Dipstick 10 — Engine Coolant Reservoir 4 — Automatic Transmission Dipstick 11 — Power Steering Fluid Reservoir 5 — Brake Fluid Reservoir 12 — Coolant Pressure Cap 6 ...

REPLACEMENT PARTS Use of genuine MOPAR 威 parts for normal/scheduled maintenance and repairs is highly recommended to en-sure the designed performance. Damage or failurescaused by the use of non-MOPAR 威 parts for maintenance and repairs will not be covered by the manufacturer’swarranty. DEALER SERVIC...

MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed yourvehicle. Besides those maintenance items specified in the fixedmaintenance schedule, there are other components whichmay require servicing or replacement in the future....

parked overnight. When checking oil after operating theengine, first ensure the engine is at full operating tem-perature, then wait for 30 minutes after engine shutdownto check the oil. Checking the oil while the vehicle is on level ground willimprove the accuracy of the oil level readings. Add oilo...

Engine Oil Selection For best performance and maximum protection under alltypes of operating conditions, the manufacturer onlyrecommends engine oils that are API CJ-4 certified andmeet the requirements of Chrysler Group LLC. UseMOPAR 威 or an equivalent oil meeting Chrysler Material Standard MS-10902...

Engine Oil Viscosity (SAE Grade) Use SAE 15W-40 engine oil that meets Chrysler MaterialsStandard MS-10902 and the API CJ-4 engine oil category. In ambient temperatures below 0°F (-18°C), SAE 5W-40 synthetic engine oil that meets Chrysler Materials Stan- dard MS-10902 and the API CJ-4 engine oil cate...

The condition of the air cleaner filter is monitored by theEngine Control Module. The “SERVICE AIR FILTER”message will display in the Electronic Vehicle Informa-tion Center (EVIC) when service is required. Refer to“Electronic Vehicle Information Center” in this manual. Do not remove the top of the a...

exhaust aftertreatment damage. This includes the use ofnon-approved air filters. Use only MOPAR 威 approved air filters or equivalent. A visual inspection of the air cleaner filter element isnever recommended under normal circumstances. Abadly restricted element may appear clean while a soiledelement...

CAUTION! If the “Water In Fuel Indicator Light” remains on, DONOT START the engine before you drain water fromthe fuel filter to avoid engine damage. If the “Water In Fuel Indicator Light” comes on and asingle chime is heard while you are driving, or with theignition switch in the ON position, there...

NOTE: The fuel/water separator drain valve is located on the bottom of the fuel filter housing. If more than a couple ounces/milliliters of fuel have beendrained, follow the directions for “Priming If The EngineHas Run Out Of Fuel.” Fuel Filter Replacement NOTE: Using a fuel filter that does not mee...

CAUTION! (Continued) • Do not prefill the fuel filter when installing a newfuel filter. There is a possibility debris could beintroduced into the fuel filter during this action. Itis best to install the filter dry and allow the in-tanklift pump to prime the fuel system. 1. Ensure engine is turned of...

Priming If The Engine Has Run Out Of Fuel WARNING! Do not open the high pressure fuel system with theengine running. Engine operation causes high fuelpressure. High pressure fuel spray can cause seriousinjury or death. 1. Add a substantial amount of fuel to the tank, approxi-mately 5 to 10 gal (19L ...

Refer to the following messages that may be displayed onyour Electronic Vehicle Information Center (EVIC): WARNING! A hot exhaust system can start a fire if you park overmaterials that can burn. Such materials might begrass or leaves coming into contact with your exhaustsystem. Do not park or operat...

By simply driving your vehicle at highway speeds for aslittle as 45 minutes, you can remedy the condition in theparticulate filter system and allow your Cummins 威 diesel engine and exhaust after-treatment system to remove thetrapped PM and restore the system to normal operatingcondition. Exhaust Fil...

CAUTION! See your authorized dealer, as damage to the exhaustsystem could occur soon with continued operation. Maintenance-Free Batteries The top of the maintenance-free batteries are perma-nently sealed. You will never have to add water, nor isperiodic maintenance required. NOTE: Replacement batter...

Adding Coolant Your vehicle has been built with an improved enginecoolant (antifreeze) that allows extended maintenanceintervals. This engine coolant (antifreeze) can be used upto 5 Years or 105,000 miles (168 000 km) before replace-ment. To prevent reducing this extended maintenanceperiod, it is im...

engine cold, the level of the engine coolant (antifreeze) inthe coolant recovery bottle should be between the rangesindicated on the bottle. The radiator normally remains completely full, so there isno need to remove the radiator cap unless checking forengine coolant (antifreeze) freeze point or rep...

• Maintain engine coolant (antifreeze) concentration at50% HOAT engine coolant (antifreeze) (minimum)and distilled water for proper corrosion protection ofyour engine, which contains aluminum components. • Make sure that the radiator and coolant recoverybottle overflow hoses are not kinked or obstru...

4. Place the shift lever momentarily into each gear posi-tion ending with the shift lever in PARK. Make sure theengine is running at idle speed. 5. Remove the dipstick and determine if the fluid is hotor cold. Hot fluid is approximately 160°F to 175°F (70°Cto 82°C). This is the normal operating temp...

CAUTION! Be aware that if the fluid level is below 50°F (10°C),it may not register on the dipstick. Do not add fluiduntil the temperature is elevated enough to producea accurate reading. 8. Check for leaks. Release the parking brake. NOTE: To prevent dirt and water from entering the transmission aft...

Required Maintenance For Noise Control Systems The following maintenance services must be performedevery six months or 7,500 miles (12 000 km) whichevercomes first, to assure proper operation of the noisecontrol systems. In addition, inspection and serviceshould be performed anytime a malfunction is...

Maintenance Log and Service Chart (Diesel Engines) Noise Systems Maintenance Chart and Service Log — Insert Month, Day, Year under column mileage closest to the mileage at which service was performed.MILES 7,500 15,000 22,500 30,000 37,500 45,000 52,500 60,000 KILOMETERS 12 000 24 000 36 000 48 000 ...

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo-graphic locations and usage. Chemicals that make roadspassable in snow and ice, and those that are sprayed ontrees and road surfaces during other seasons, ar...

Washing • Wash your vehicle regularly. Always wash your ve-hicle in the shade using MOPAR 威 Car Wash or equiva- lent, or a mild car wash soap and rinse the panelscompletely with clear water. • If insects, tar or other similar deposits have accumu-lated on your vehicle, use MOPAR 威 Super Kleen Bug an...

• If your vehicle is damaged due to an accident orsimilar cause which destroys the paint and protectivecoating, have your vehicle repaired as soon as pos-sible. The cost of such repairs is considered the respon-sibility of the owner. • If you carry special cargo such as chemicals, fertilizers,de-ice...

• For tough stains, apply MOPAR 威 Total Clean or equivalent, or a mild soap solution to a clean, dampcloth and remove stain. Use a fresh, damp towel toremove soap residue. • For grease stains, apply MOPAR 威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth andremove stain. Use a fresh, damp...

Cleaning Headlights Your vehicle is equipped with plastic headlights and foglights (if equipped) that are lighter and less susceptible tostone breakage than glass headlights. Plastic is not as scratch resistant as glass and thereforedifferent lens cleaning procedures must be followed. To minimize th...

If the belts need cleaning, use a mild soap solution orlukewarm water. Do not remove the belts from the car towash them. Replace the belts if they appear frayed or worn or if thebuckles do not work properly. Dry with a soft tissue. FUSES Integrated Power Module The integrated power module is located...

Cav- ity Cartridge Fuse Mini Fuse Description 30 15 AmpBlue Power Run/Start-ABS/RWAL/Smart Bar/YAWSensor/UniversalExhaust Gas Oxygen(Uego) Sensor Controller 31 10 AmpRed PCM (Gas)/TCM(Diesel 58RFE) 32 10 AmpRed Power Ignition Run —Adjustable Pedals LED 33 10 AmpRed Power-IGN Run —HVAC 34 — — 35 15 A...

CAUTION! • When installing the Integrated Power Modulecover, it is important to ensure the cover is prop-erly positioned and fully latched. Failure to do somay allow water to get into the Integrated PowerModule, and possibly result in a electrical systemfailure. • When replacing a blown fuse, it is ...

BULB REPLACEMENT Front Headlamp (Halogen)/Park and Turn SignalLamps CAUTION! This is a halogen bulb. Avoid touching the glass withyour fingers. Reduced bulb life will result. 1. Open the hood. 2. Remove the two bolts from the front of the headlamphousing. 7 MAINTAINING YOUR VEHICLE 359

6. Unlock and pull connector straight from the base ofthe headlamp halogen bulb. 7. Twist connector on the side marker/turn signal/parklamp bulb 1 ⁄ 4 turn and remove connector and bulb from housing. 8. Remove housing from vehicle with headlamp halogenbulb in housing. 7 MAINTAINING YOUR VEHICLE 361

9. Twist the headlamp bulb 1 ⁄ 4 turn and remove the headlamp bulb from the housing. 10. Replace headlamp or side marker/turn signal/parklamp bulb. Do not touch the headlamp bulb. 11. Reverse procedure for installation of bulbs andhousing. Fog Lamps 1. Reach under the vehicle, unlock and twist conne...

3. Reverse procedure for installation of bulbs andhousing. Cab Top Clearance Lamps — If Equipped 1. Remove the two screws from the top of the lamp. 7 MAINTAINING YOUR VEHICLE 363

FLUID CAPACITIES U.S. Metric Fuel (Approximate) Standard Rear Tank 52 Gallons 197 Liters Optional Midship Tank 22 Gallons 83 Liters Engine Oil with Filter 6.7L Turbo Diesel Engine 12 Quarts 11.4 Liters Cooling System 6.7L Turbo Diesel Engine (MOPAR 威 Antifreeze/ Coolant 5 Year/100,000 Mile Formula) ...

Component Fluid, Lubricant, or Genuine Part Crankcase Ventilation Filter MOPAR 威 CCV Filter or equivalent. Fuel Selection Use good quality diesel fuel from a reputable supplier in your vehicle.Federal law requires that you must fuel this vehicle with Ultra Low SulfurHighway Diesel fuel (15 ppm Sulfu...

MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 370 ▫ Oil Change Indicator System . . . . . . . . . . . . 371 ▫ Perform Service Indicator . . . . . . . . . . . . . . 371 ▫ Required Maintenance Intervals . . . . . . . . . . 371 8 M A I N TE N A N C E SC H E D...

MAINTENANCE SCHEDULE CAUTION! Failure to perform the required maintenance itemsmay result in damage to the vehicle. At Each Stop for Fuel • Check the engine oil level about 30 minutes after afully warmed engine is shut off. Checking the oil levelwhile the vehicle is on level ground will improve thea...

Oil Change Indicator System Ram Truck Chassis Cab(3500, 4500, and 5500 Models) Replace the engine oil and oil filter every 7,500 miles(12 000 km) or six months, or sooner if prompted by theoil change indicator system (if equipped). Under nocircumstances should oil change intervals exceed7,500 miles ...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 ▫ Prepare For The Appointment . . . . . . . . . . . 395 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 395 ▫ Be Reasonable With R...

This is why you should always talk to an authorizeddealer’s service manager first. Most matters can be re-solved with this process. • If for some reason you are still not satisfied, talk to thegeneral manager or owner of the authorized dealer-ship. They want to know if you need assistance. • If an a...

Customer Assistance For The Hearing Or SpeechImpaired (TDD/TTY) To assist customers who have hearing difficulties, themanufacturer has installed special TDD (Telecommuni-cation Devices for the Deaf) equipment at its customercenter. Any hearing or speech impaired customer, whohas access to a TDD or a...

We appreciate that you have made a major investmentwhen you purchased the vehicle. An authorized dealerhas also made a major investment in facilities, tools, andtraining to assure that you are absolutely delighted withthe ownership experience. You’ll be pleased with theirsincere efforts to resolve a...

If NHTSA receives similar complaints, it may open aninvestigation, and if it finds that a safety defect exists ina group of vehicles, it may order a recall and remedycampaign. However, NHTSA cannot become involved inindividual problems between you, your authorizeddealer, and the manufacturer. To con...

Temperature Grades The temperature grades are A (the highest), B, and C,representing the tire’s resistance to the generation of heatand its ability to dissipate heat, when tested undercontrolled conditions on a specified indoor laboratorytest wheel. Sustained high temperature can cause thematerial o...

Dipsticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . 242 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . 337Engine Oil . . . . . . . ...

Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . 124Hub Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Idle Up Feature . . . . . . . . . . . . . . . . . . . . . . . . . 214Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key . . . . . . . ...

Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 73Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 74Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 398Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 72Safety Information, Tire . . . . . . . ....

R a m Tr u c k O W N E R ’ S M A N U A L 2 0 1 0 2010 Ram T ruc k Chassis Chrysler Group LLC 10DD43-126-AA First Edition Printed in U.S.A. C H A S S I S 249701 Ram Chassis OM:07 Dodge Caliberƒ.qxd 8/21/09 11:16 AM Page 1