Dodge 2007 Charger SRT8 - Manuals

VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehiclecould seriously affect its roadworthiness and safetyand may lead to an accident resulting in seriousinjury or death. INTRODUCTION 7 1

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 11 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . . 11 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .12 䡵 Sentry Key . . . . . . . . . . . . . . . . . . . . . . . ....

A WORD ABOUT YOUR KEYS You can insert the double-sided keys into the locks witheither side up. The dealer that sold you your new vehicle has the keycode numbers for your vehicle locks. These numbers canbe used to order duplicate keys from your dealer. Askyour dealer for these numbers and keep them i...

Exit,” under “Personal Settings (Customer Program-mable Features),” under “Electronic Vehicle InformationCenter (EVIC)” in Section 4 of this manual. WARNING! Never leave children alone in a vehicle. Leavingchildren in a vehicle unattended is dangerous for anumber of reasons. A child or others could ...

NOTE: A key, which has not been programmed, is also considered an invalid key even if it is cut to fit theignition lock cylinder for that vehicle. During normal operation, after turning on the ignitionswitch, the Vehicle Security Alarm Indicator Light willturn on for three (3) seconds for a bulb che...

NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to thedealer. Customer Key Programming If you have two valid sentry keys, you can program newsentry keys to the system by performing the followingprocedure: 1. Cut the additional Sentry Key Transponder blan...

REMOTE KEYLESS ENTRY This system allows you to lock or unlock the doors, openthe trunk, or activate the panic alarm from distances upto about 23 feet (7 meters) using a hand held radiotransmitter. The transmitter need not be pointed at thevehicle to activate the system. NOTE: Inserting the key into ...

with Remote Key Lock,” under ⬙ Personal Settings (Cus- tomer Programmable Features),” under “Electronic Ve-hicle Information Center (EVIC)” in Section 4 of thismanual. Turn Headlights On with Remote Key Unlock This feature activates the headlights for up to 90 secondswhen the doors are unlocked with...

• You may need to be less than 23 feet (7 meters) fromthe vehicle when using the transmitter to turn off thepanic alarm due to the radio frequency noises emittedby the system. Programming Additional Transmitters Refer to SENTRY KEY “Customer Key Programming.” (See page 14 for more information.) If y...

General Information This device complies with part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference received,including interference that may cause undesired...

WARNING! • For personal security and safety in the event of anaccident, lock the vehicle doors as you drive aswell as when you park and leave the vehicle. • When leaving the vehicle always remove the keyfrom the ignition lock, and lock your vehicle.Unsupervised use of vehicle equipment maycause seve...

Automatic Door Locks The doors will lock automatically on vehicles with powerdoor locks if all of the following conditions are met: 1. The Automatic Door Locks feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mp...

Child Protection Door Lock To provide a safer environment for small children ridingin the rear seats, the rear doors are equipped with a childprotection door lock system. To Engage the Child Protection Door Lock 1. Open the rear door. 2. Insert the tip of the vehicle’s ignition key or alike intothe ...

To Disengage the Child Protection Door Lock 1. Open the rear door. 2. Insert the tip of the vehicle’s ignition key or alike intothe child lock control and pull it downward. 3. Repeat Steps 1 and 2 on the opposite rear door. NOTE: After disengaging the child protection door lock system, always test t...

WARNING! Never leave children in a vehicle, with the keys inthe ignition switch. Occupants, particularly unat-tended children, can become entrapped by the win-dows while operating the power window switches.Such entrapment may result in serious injury ordeath. Auto Down Feature The driver door power ...

Power Off to Accessories Until Exit,” under “PersonalSettings (Customer Programmable Features),” under“Electronic Vehicle Information Center (EVIC)” in Sec-tion 4 of this manual. NOTE: • If the window runs into any obstacle during auto-closure, it will reverse direction and then stop. Removethe obst...

Reset Any time the vehicle battery is disconnected, or goesdead, the auto-up function will be disabled. To reactivatethe auto-up feature, perform the following steps aftervehicle power is restored: 1. Pull the window switch up to close window com-pletely and continue to hold the switch up for anaddi...

The trunk lid can be released from outside the vehicle bypressing the trunk button on the Remote Keyless EntryTransmitter two times. With the ignition ON, the trunk open symbol will displayin the instrument cluster indicating that the trunk isopen. The odometer display will reappear once the trunkis...

OCCUPANT RESTRAINTS Some of the most important safety features in yourvehicle are the restraint systems. These include the frontand rear seat belts for the driver and all passengers, frontairbags for both the driver and front passenger and, if soequipped, side curtain airbags for the driver and pass...

WARNING! • It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision,people riding in these areas are more likely to beseriously injured or killed. • Do not allow people to ride in any area of yourvehicle that is not equipped with seats and seatbelts. • Be sure...

3. When the belt is long enough to fit, insert the latchplate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ridetoo high on your body, possibly causing internalinjuries. Always buckle your belt i...

4. Position the lap belt across your thighs, below yourabdomen. To remove slack in the lap belt portion, pull upa bit on the shoulder belt. To loosen the lap belt if it is tootight, tilt the latch plate and pull on the lap belt. A snugbelt reduces the risk of sliding under the belt in acollision. WA...

WARNING! A frayed or torn belt could rip apart in a collisionand leave you with no protection. Inspect the beltsystem periodically, checking for cuts, frays, or looseparts. Damaged parts must be replaced immediately.Do not disassemble or modify the system. Seat beltassemblies must be replaced after ...

Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/shoulder belt. 1. Position the latch plate as close as possible to theanchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latchplate, grasp and twist the belt webbing 180° to create afold that be...

BeltAlert Programming The Enhanced Warning System (BeltAlert) can be en-abled or disabled by your authorized dealer or byperforming the following steps: NOTE: DaimlerChrysler does not recommend deacti- vating the Enhanced Warning System (BeltAlert). 1. With all doors closed, and the ignition switch ...

distinctive label on the webbing. Children 12 years oldand under should be properly restrained in the rear seatwhenever possible. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward untilthe entire belt is extracte...

Driver and Front Passenger SupplementalRestraint System (SRS) - Airbag This vehicle has front airbags for both the driver andfront passenger as a supplement to the seat belt restraintsystems. The driver’s airbag is mounted in the center ofthe steering wheel. The passenger’s front airbag ismounted in...

NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deploy-ment. WARNING! • Do not put anything on or around the front airbagcovers or attempt to manually open them. You maydamage the airbags and you could be injuredbecause the airbags are no longer functi...

NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede theproper performance of the curtain airbags. Along with the seat belts, front airbags work with theinstrument panel knee bolsters to provide improvedprotection for the driver and front passenger. S...

8. The driver and front passenger seats should be movedback as far as practical to allow the airbags time to inflate. 9. If your vehicle has side curtain airbags do not leanagainst the door, airbags will inflate forcefully into thespace between you and the door. 10. If the airbag system in this vehi...

• Airbag Warning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side Win-dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Seatbelt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors • Driver and Fro...

WARNING! Ignoring the AIRBAG Warning Light in your instru-ment panel could mean you won’t have the airbagsto protect you in a collision. If the light does notcome on, stays on after you start the vehicle, or if itcomes on as you drive, have the airbag systemchecked right away. • The Driver and Front...

• The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position every-one for the best interaction with the front airbag. If A Deployment Occurs The airbag system is designed to deploy when the ACMdetects a moderate-to-severe collision, to help restrain thedrive...

WARNING! Deployed airbags can’t protect you in another colli-sion. Have the airbags replaced by an authorizeddealer as soon as possible. Enhanced Accident Response Feature If the airbags deploy after an impact and the electricalsystem remains functional, vehicles equipped withpower door locks will u...

Airbag Warning Light You will want to have the airbags ready toinflate for your protection in an impact. Whilethe airbag system is designed to be mainte-nance free, if any of the following occurs, have an authorized dealer service the system promptly: • The Airbag Warning Light does not come on or f...

treated confidentially. Confidential data will not be dis-closed by DaimlerChrysler to any third party exceptwhen: 1. Used for research purposes, such as to match datawith a particular crash record in an aggregate database,provided confidentiality of personal data is thereafterpreserved 2. Used in d...

Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who areolder than one year can ride forward-facing in thevehicle. Forward-facing child seats and convertible childseats used in the forward-facing direction are for childrenwho weigh 20 to 40 lbs (9 to 18 kg) and who ...

the child restraint using lower anchorages and uppertether straps from the child restraint to the vehiclestructure. LATCH-compatible child restraint systems are now avail-able. However, because the lower anchorages are to beintroduced over a period of years, child restraint systemshaving attachments...

The rear seat lower anchorages are round bars,located at the rear of the seat cushion where itmeets the seat back, and are just visible whenyou lean into the rear seat to install the child restraint. You will easily feel them if you run your fingeralong the intersection of the seatback and seat cush...

buckle and twist the short buckle-end belt several timesto shorten it. Insert the latch plate into the buckle with therelease button facing out. If the belt still can’t be tightened, or if by pulling andpushing on the restraint loosens the belt, you may needto do something more. Disconnect the latch...

CAUTION! Never use Non-Detergent Oil or Straight MineralOil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. Thisshould be considered as a normal part of the break-in andnot interpreted as an indication of diff...

If it is necessary to sit in a parked vehicle with the enginerunning, adjust your heating or cooling controls to forceoutside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry intothe vehicle body is a properly maintained engine exhaustsystem. When...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .62 ▫ Automatic Dimming Inside Mirror — IfEquipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 ▫ Outside...

▫ To Accelerate For Passing . . . . . . . . . . . . . . . 102 䡵 Overhead Console . . . . . . . . . . . . . . . . . . . . . 103 ▫ Courtesy/Reading Lights . . . . . . . . . . . . . . . . 103 ▫ Sunglasses Storage . . . . . . . . . . . . . . . . . . . . 104 䡵 Garage Door Opener (HomeLink 威 ) — If Equipp...

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rearwindow. A two-point pivot system allows for horizontaland vertical mirror adjustment. Annoying headlight glare can be reduced by moving thesmall control under the mirror to the night position(toward rear of vehic...

CAUTION! To avoid damage to the mirror during cleaning,never spray any cleaning solution directly onto themirror. Apply the solution onto a clean cloth andwipe the mirror clean. Outside Mirrors To receive maximum benefit, adjust the outside mirror(s)to center on the adjacent lane of traffic and a sl...

Power Remote-Control Mirrors The power mirror switch is located on the driver’s doortrim panel next to the power door lock switch. A rotaryknob selects the left mirror, right mirror, or off position. After selecting a mirror, move the knob in the samedirection you want the mirror to move. Use the ce...

HANDS–FREE COMMUNICATION (UConnect™) —IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehiclecommunications system. UConnect™ allows you to diala phone number with your cellular phone using simplevoice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”Work ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Your cellul...

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Edit. ⬙ • You will then be asked for the name of the phonebookentry that you wish to edit. • Next, choose the number designation (home, work,mobile, or pager) that you wish to edit. • When prompted, recite the new phone number for ...

• Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speakingin North American English, French, and Spanish ac-cents, t...

• Performance, such as audio clarity, echo, and loudnessto a large degree rely on the phone and network, andnot the UConnect™ system. • Echo at far end can sometime be reduced by loweringthe in-vehicle audio volume. Bluetooth Communication Link Occasionally, Cellular phones have been found to loseco...

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main ...

WARNING! Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seat couldcause you to lose control. The seat belt might not beproperly adjusted and you could be injured. Adjustthe seat only while the vehicle is parked. CAUTION! Do not place any article under a power se...

Lumbar Support This feature allows you to increase or decrease theamount of lumbar support. Turn the control lever for-ward to increase and rearward to decrease the desiredamount of lumbar support. Head Restraints Head restraints can reduce the risk of whiplash injury inthe event of impact from the ...

ignition, you can choose from High, Off, or Low heatsettings. Amber LEDs in the top portion of each switchindicate the level of heat in use. Two LEDs will illuminatefor high, one for low, and none for off. Press the switch once to select high-level heating. Pressthe switch a second time to select lo...

Folding Rear Seat The rear seatbacks can be folded forward to provide anadditional storage area. Pull on the loops shown in theillustration to fold down either or both seatbacks. Theseloops can be tucked away when not in use. When the seatback is folded to the upright position, makesure it is latche...

TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pullthe hood release lever located under the left side of theinstrument panel. Next, move to the outside of the vehicle and push thesafety catch to the left. The safety catch is located underthe center front edge of the...

WARNING! If the hood is not fully latched, it could fly up whenthe vehicle is moving and block your forward vision.You could have a collision. Be sure all hood latchesare fully latched before driving. LIGHTS Headlight Switch The headlight switch is located on the left side ofthe instrument panel. Th...

headlights will stay ON for up to 90 seconds after youturn the ignition switch OFF. To turn the AutomaticSystem OFF, move the headlight switch out of the AUTO(A) position. NOTE: The engine must be running before the head- lights will come ON in the Automatic mode. Headlights On with Wipers (Availabl...

If you turn the headlights, park lights, or ignition switchon again, the system will cancel the delay. If you turn the headlights off before the ignition, they willturn off in the normal manner. NOTE: The lights must be turned off within 45 seconds of turning the ignition off to activate this featur...

Multi-Function Lever The multi-function lever controls the operation of theturn signals, headlight beam selection, and passinglights. The lever is located on the left side of the steeringcolumn. Turn Signals Move the Multi-Function Lever up or down and thecorresponding turn signal indicator in the i...

Overhead Console Map/Reading Lights These lights are mounted between the sun visors on theoverhead console. Each light is turned ON by pressingthe lens. Press the lens a second time to turn OFF thelight. These lights also turn on when a door is opened, orwhen the unlock button on the remote keyless ...

Dome Light Position Rotate the dimmer control completely upward to thesecond detent to turn on the interior lights. The interiorlights will remain on when the dimmer control is in thisposition. Interior light Defeat (OFF) Rotate the dimmer control to the extreme bottom “OFF”position. The interior li...

two wipe cycles after releasing the lever and then resumethe intermittent interval previously selected. If you activate the washer while the windshield wiper isturned OFF, the wipers will operate for two wipe cyclesand then turn OFF. Headlights On with Wipers (Available with AutoHeadlights Only) Whe...

The fluid reservoir will hold nearly 1 gallon (4 liters) ofwasher fluid when the message “Low Washer Fluid”appears in the Electronic Vehicle Information Center(EVIC). WARNING! Commercially available windshield washer solventsare flammable. They could ignite and burn you. Caremust be exercised when f...

outward or push it inward as desired. To lock the steeringcolumn in position, push the control handle inward untilfully engaged. WARNING! Do not adjust the steering wheel while driving. Thetelescoping adjustment must be locked while driv-ing. Adjusting the steering wheel while driving ordriving with...

Press the switch rearward to move the pedals rearward(toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. CAUTION! Do not place any arti...

To Activate: Push the speed control lever inward (towardthe steering column) and release (“ON/OFF”).The indicator light in the lever (and in theinstrument cluster on some models) will illu- minate to show that the speed control system is ON. Toturn the system OFF, push the lever inward (toward thest...

speed. To do so, push the lever up and release (RES/ACCEL), and then remove your foot from the acceleratorpedal. To Vary the Speed Setting: When the speed control is set, you can increase speed bypushing the lever up and holding (“RES/ACCEL”).When the lever is released, a new set speed will beestabl...

Programming HomeLink NOTE: When programming a garage door opener, it is advised to park outside the garage. It is also recom-mended that you install a new battery in the hand-heldtransmitter of the device being programmed. This willallow for quicker training and accurate transmission ofthe radio-fre...

2. Position the end of your hand-held transmitter 1-3inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold the HomeLink button(that you want to train) and the hand-held transmitterbutton. Do not release the buttons until Step 4 is complete. NOTE: Some gate operators and ga...

system). Please proceed to Steps 6–8 to complete theprogramming of a rolling code equipped device (mostcommon garage door openers require this step. 6. At the garage door opener receiver (motor-head unit)in the garage, locate the ⬙ learn ⬙ or ⬙ smart ⬙ button. This can usually be found where the han...

This device complies with part 15 of FCC rules and withRSS-210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference that may bereceived including interference that may cause undes-ired operat...

Settings (Customer Programmable Features),” under“Electronic Vehicle Information Center (EVIC)” in Sec-tion 4 of this manual. Sunroof Fully Closed Press the switch forward and release to ensure that thesunroof is fully closed. ELECTRICAL POWER OUTLETS There are two 12-volt electrical outlets on this...

The center console outlet is powered directly from thebattery (power available at all times). Items plugged intothis outlet may discharge the battery and/or preventengine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in drawpower from the vehicle’s b...

CUP HOLDERS Front Seat Cup Holders — Standard The cup holders are located in the forward edge of thecenter console. Front Seat Cup Holders — Premium The cup holders are located in the forward edge of thecenter console. Push down on the cover as shown to expose the cupholders. Close the cover when th...

Rear Seat Cup Holders The rear seat cup holders are located in the center armrestbetween the rear seats. The cup holders are positionedforward in the armrest and side-by-side to provideconvenient access to beverage cans or bottles whilemaintaining a resting place for the rear occupants’ el-bows. STO...

Cargo Area The 60/40 split-folding rear seat provides cargo-carryingversatility. The seatbacks fold down easily by pullingnylon tabs between the seatbacks and the bolsters. Whenthe seats are folded down, they provide a continuous,nearly flat extension of the load floor. When the seatback is folded t...

WARNING! • The weight and position of cargo and passengerscan change the vehicle center of gravity andvehicle handling. To avoid loss of control result-ing in personal injury, follow these guidelines forloading your vehicle: • Always place cargo evenly on the cargo floor. Putheavier objects as low a...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel And Controls . . . . . . . . . . . . 122 䡵 Premium Instrument Cluster . . . . . . . . . . . . . . 123 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 124 䡵 Electronic Vehicle Information Center (EVIC) . 132 ▫ Electronic Vehicle ...

INSTRUMENT PANEL AND CONTROLS 1 — Air Outlet 6 — Radio 11 — Ignition Switch 2 — Instrument Cluster 7 — Climate Control 12 — Hood Release 3 — Hazard Switch 8 — Heated Seat Switch* 13 — Trunk Release Switch 4 — Electronic Stability Program Off Button* / Traction Control System Off Button* 9 — Power Ou...

PREMIUM INSTRUMENT CLUSTER UNDERSTANDING YOUR INSTRUMENT PANEL 123 4

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank whenthe ignition switch is in the ON position. 2. Trip Odometer Button Press this button to change the display from odometer toeither of two trip odometer settings. The letter “A” or “B”will appear whe...

turn on in the event of an EBD failure. Immediate repairof the ABS system is required in the event of an EBDfailure. The operation of the Brake Warning Light can be checkedby turning the ignition switch from the OFF position tothe ON position. The light should turn on for approxi-mately two seconds ...

• Left/Right Front Door Ajar (one or more, with a singlechime if speed is above 1 mph [1.6 km]) • Left/Right Rear Door Ajar (one or more, with a singlechime if speed is above 1 mph [1.6 km]) • Door(s) Ajar (with a single chime if vehicle is inmotion) • Trunk Ajar (with a single chime) • Low Washer F...

• Display Units of Measure in: To make your selection, press and release the FUNC-TION SELECT button until “US” or “METRIC” appears. To Reset The Display Reset will only occur while a resettable function is beingdisplayed. Press and release the FUNCTION SELECTbutton once to clear the resettable func...

Compass Variance Compass Variance is the difference between magneticNorth and Geographic North. In some areas of thecountry, the difference between magnetic and geographicNorth is great enough to cause the compass to give falsereadings. If this occurs, the compass variance must be setusing the follo...

1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately2 seconds. 3. Press the SCROLL button until “Compass Variance”message and the last variance zone number displays inthe EVIC. 4. Press and release FUNCTION SELECT button untilthe proper variance zone is selected acc...

or Menu display on the Navigation Unit. When the Menudisplay is active, the SCROLL button can be used to scrollthrough the list, the FUNCTION SELECT button can beused to select an item, and the AUDIO MODE button canbe used to return to the previous menu. When the Mapdisplay is active, pressing the F...

on lock/unlock feature. To make your selection, pressand release the FUNCTION SELECT button until “ON”or “OFF” appears. “Flash Lights with Remote Key Lock” When ON is selected, the front and rear turn signals willflash when the doors are locked or unlocked with theremote keyless entry transmitter. T...

and thus remain a part of the AM reception. Theyinterfere very little with the frequency variations thatcarry the FM signal. AM Reception AM sound is based on wave amplitude, so AM receptioncan be disrupted by such things as lightning, power linesand neon signs. FM Reception Because FM transmission ...

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pressthe ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volu...

(if equipped) frequencies, pausing for 5 seconds at eachlistenable station before continuing to the next. To stopthe search, press SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button causes the tuner to scanthrough preset stations in either, AM, FM, or Satellite (ifequipped) freq...

Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CDlabel facing up. The CD will automatically be pulled intothe CD Player and the CD icon w...

TIME Button (CD Mode) Press this button to change the display from elapsed CDplaying time to time of day. The time of day will displayfor 5 seconds. RW/FF (CD Mode) Press and hold the FF (Fast Forward) and the CD playerwill begin to fast forward until FF is released. The RW(Reverse) button works in ...

SALES CODE RAK – AM/FM/CASSETTE/CD(6-DISC) RADIO WITH OPTIONAL SATELLITERADIO, HANDS FREE PHONE, VIDEO, MP3, andWMA CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or A...

Country Country Oldies Oldies Soft Soft Nostalgia Nostalgia Jazz Jazz Classical Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Soft_R_&_B Foreign Language Foreign_Language Religious Music Religious_Music Religious Talk Religious_Talk Personality Personality Public Public Colle...

Noise Reduction The Dolby Noise Reduction System* is on whenever thetape player is on, but may be switched off. To turn off the Dolby Noise reduction System: PressPreset 1 after you insert the tape. The NR light in thedisplay will go off when the Dolby System is off. * ”Dolby” noise reduction is man...

RW/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forward) and the CD player willbegin to fast forward until FF is released or RW oranother CD button is pressed. The RW (Reverse) buttonworks in a similar manner. TUNE Control (CD MODE for CD Audio Play) Pressing the TUNE control allows the se...

ID3 Tag information for artist, song title, and album titleare supported for version 1 ID3 tags. ID3 version 2 is notsupported by the radios. Playlist files are not supported. MP3 Pro files are notsupported. Playback of MP3 and WMA Files When a medium containing MP3 data is loaded, theradio checks a...

Turn the TUNE control to display available folders ormove through available folders. Press the TUNE controlto select a folder. Buttons 1 - 6 (CD Mode for MP3 Play) Selects disc positions 1 - 6 for Play/Load/Eject. Operating Instructions - Hands Free Phone (IfEquipped) Refer to “Hands-Free Phone” in ...

Mapping information for navigation is supplied on aDVD that is loaded into the unit. One map DVD coversall of North America. Refer to your “Navigation User’sManual” for detailed operating instructions. Operating Instructions — Satellite Radio (IfEquipped) Refer to your “Navigation User’s Manual” for...

5. Select DONE to exit from the clock setting mode. PressENTER to save your changes. If you press CANCEL orNAV then your changes will not be saved. User Defined Clock If you wish to set the clock to a time different than thesystem clock, you can manually adjust the time bychoosing the “User Defined ...

Audio Clock Display Select this option to change the size of the clock on theaudio screens. 1. When you are at an audio screen, quickly press theTIME button on the navigation faceplate. 2. In this example the large clock appears on the screen. 3. To switch the clock to the small clock, quickly press...

Kicker Mobile Surround (KMS1) The VES for this vehicle comes equipped with KickerMobile Surround (KMS1). This feature offers the ultimatemovie experience by providing surround sound uniquelyequalized for the interior space of your vehicle. The KMS1 activates whenever a DVD is in the VESplayer, and t...

at www.sirius.com. Please have the following informa-tion available when activating your system: 1. The Electronic Serial Number/Sirius IdentificationNumber (ESN/SID). 2. Credit card information. 3. Your Vehicle Identification Number. Electronic Serial Number/Sirius IdentificationNumber (ESN/SID) Th...

REMOTE SOUND SYSTEM CONTROLS The remote sound system controls are located on thesurface of the steering wheel at the 3 and 9 o’clockpositions. Vehicles equipped with steering wheel mounted buttonsare also equipped with the Electronic Vehicle InformationCenter (EVIC). The EVIC features a driver-inter...

When the EVIC is in the Compass/Temp/Audio screen, press the FUNCTION SELECTbutton to advance the radio to the next presetstation, to change the side of the tape beingplayed (if so equipped), or to change the cur-rent CD track being played (if so equipped). when the EVIC is in the Compass/Temp/Audio...

CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take thefollowing precautions: 1. Handle the disc by its edge; avoid touching thesurface. 2. If the disc is stained, clean the surface with a soft cloth,wiping from center to edge. 3. Do not apply paper, paper CD labels, or tape to ...

Manual Air Conditioning and Heating System Blower Control The rotary knob on the left controls theblower. The control has an OFF posi-tion and four speed settings. The blower will remain on until the con-trol is turned to the OFF position orthe ignition is turned OFF. Temperature Control The rotary ...

NOTE: To improve fuel economy, leave in defrost only when necessary. • Defrost/Floor Air flows through the front and rear flooroutlets and the outlets at the base of thewindshield. Air is also directed to the front door windows through the side window demistergrilles. • Floor Air flows through the f...

a second time to turn off the air conditioning. An LED inthe button will illuminate when compressor operation isselected. Automatic Temperature Control — If Equipped Automatic Operation The Infrared Dual-Zone Climate Control System auto-matically maintains the climate in the cabin of the vehicleat t...

Recirculation to be selected while in defrost ordefrost/floor mode. Attempting to use the recircula-tion while in these modes will cause the LED in thecontrol button to blink and then turn off. Manual Operation This system offers a full complement of manual overridefeatures, which consist of Blower ...

NOTE: To control the air conditioning manually, the mode selector must be moved out of the AUTO position. • Recirculation Control This button can be used to block out smoke,odors, dust, high humidity, or if rapid coolingis desired. The recirculation mode should onlybe used temporarily. An LED in the...

system lubrication to minimize the possibility of com-pressor damage when the system is started again. Window Fogging Interior fogging on the windshield can be quickly re-moved by turning the mode selector to Defrost. TheDefrost/Floor mode can be used to maintain a clearwindshield and provide suffic...

STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 190 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 190 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 190 ▫ Extremely Cold Weather (Below ⫺ 20°F Or ⫺ 29°C) . . . . . . . . . . . . ....

If Engine Fails To Start If the engine fails to start after you have followed the“NORMAL STARTING” procedure, it may be flooded.Push the accelerator pedal all the way to the floor andhold it there while cranking the engine. This should clearany excess fuel in case the engine is flooded. CAUTION! To ...

Over Temperature Mode The transmission electronics constantly monitor thetransmission oil temperature. If the transmission exceedsnormal operating temperature, the transmission willchange the way it shifts to help control the condition.This may result in a slightly different feeling or responsedurin...

out of the park position without pressing the brake. Afteroperation, return the rubber storage tray to its originalposition. 5 Speed Automatic Transmission Shifting from D (Drive) to P (Park) or R (Reverse) (orfrom P or R to D) should be done only after theaccelerator pedal is released and the vehic...

CAUTION! Coasting the vehicle, or driving for any other reasonwith selector lever in NEUTRAL can result in trans-mission damage. WARNING! Do not coast in N (Neutral) and never turn off theignition to coast down a hill. These are unsafepractices that limit your response to changing trafficor road con...

DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slip-pery surfaces may cause the rear wheels to pull errati-cally to the right or left. This phenomenon occurs whenthere is a difference in the surface traction under the rear(driving) wheels. WARNING! Rapid ...

PARKING BRAKE The parking brake should always be applied when thedriver is not in the vehicle. WARNING! Never use Park position on an automatic transmis-sion as a substitute for the parking brake. Alwaysapply parking brake fully when parked to guardagainst vehicle movement and possible injury ordama...

NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. WARNING! • Never leave children alone in a vehicle. Leavingchildren in a vehicle unattended is dangerous fora number of reasons. A child or others could beseriously or fatally injured. Do...

WARNING! • The Anti-Lock Brake System contains sophisticatedelectronic equipment that may be susceptible to inter-ference caused by improperly installed or high outputradio transmitting equipment. This interference cancause possible loss of anti-lock braking capability. In-stallation of such equipme...

Brake Force Distribution (EBD) systems are not function-ing. Immediate repair to the ABS system is required. POWER STEERING The standard power steering system will give you goodvehicle response and increased ease of maneuverabilityin tight spaces. The system will provide mechanicalsteering capabilit...

ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronicbrake control system commonly referred to as ESP. Thissystem includes the ABS (Anti-Lock Brake System), theTCS (Traction Control System), the BAS (Brake AssistSystem), and the ESP (Electronic Stability Program).These...

The ESP uses sensors in the vehicle to determine the paththat the driver intends to steer the vehicle and comparesit to the actual path of the vehicle. When the actual pathdoes not match the intended path, the ESP applies thebrake of the appropriate wheel to assist in counteractingthe condition of o...

WARNING! In the ESP Full Off mode, the engine torque reduc-tion and stability features are cancelled. Therefore,the enhanced vehicle stability offered by ESP isunavailable. NOTE: When the ESP is switched off a feature of the system remains active. This feature controls wheel spinacross an axle quite...

NOTE: • P (Passenger)-Metric tire sizing is based on U.S. designstandards. P-Metric tires have the letter “P” moldedinto the sidewall preceding the size designation. Ex-ample: P215/65R15 95H. • European Metric tire sizing is based on Europeandesign standards. Tires designed to this standard havethe ...

EXAMPLE: 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.5 = Section Width in Inches (in) R = Construction Code — ⬙ R ⬙ means Radial Construction. — ⬙ D ⬙ means Diagonal or Bias Construction. 15 = Rim Diameter in Inches (in) Service Description: 95 = Load Index...

EXAMPLE: C,D,E = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load — Maximum Load indicates the maximum load this tire is designed to carry. Maximum Pressure — Maximum Pressure indicates the maximum permissible cold tire inflation pressure for this tir...

EXAMPLE: 01 = Number representing the year in which the tire was manufactured. (2 digits) —01 means the year 2001.—Prior to July 2000, tire manufacturers were only required to have 1 number to represent the year inwhich the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or ...

Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can be carried in the vehicle2) the total weight your vehicle can carry3) the tire size designed for your vehicle4) the cold tire inflation pressures for the front, rearand spare tires...

2. Economy— Improper inflation pressures can cause uneven wearpatterns to develop across the tire tread. These abnormalwear patterns will reduce tread life resulting in a need forearlier tire replacement. Under inflation, also increasestire rolling resistance and results in higher fuel consump-tion....

CAUTION! After inspecting or adjusting the tire pressure, al-ways reinstall the valve stem cap (if equipped). Thiswill prevent moisture and dirt from entering thevalve stem, which could damage the valve stem. Inflation pressures specified on the placard are always“cold tire inflation pressure.” Cold...

WARNING! High speed driving with your vehicle under maxi-mum load is dangerous. The added strain on yourtires could cause them to fail. You could have aserious accident. Don’t drive a vehicle loaded to themaximum capacity at continuous speeds above 75mph (120 km/h). Radial-Ply Tires WARNING! Combini...

Tread Wear Indicators Tread wear indicators are in the original equipment tiresto help you in determining when your tires should bereplaced. These indicators are molded into the bottom of the treadgrooves. They will appear as bands when the tread depthbecomes 1/16 inch (2 mm). When the tread is worn...

Replacement Tires The tires on your new vehicle provide a balance of manycharacteristics. They should be inspected regularly forwear and correct cold tire inflation pressure. The manu-facturer strongly recommends that you use tires equiva-lent to the originals in size, quality and performancewhen re...

CAUTION! Replacing original tires with tires of a different sizemay result in false speedometer and odometer read-ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sidedwear. • Vehicle pull to right or left. Tires ma...

CAUTION! To avoid damage to your vehicle or tires, observe thefollowing precautions: • Because of restricted chain clearance betweentires and other suspension components, it is im-portant that only chains in good condition areused. Broken chains can cause serious damage.Stop the vehicle immediately ...

Tire Rotation — All Season Tires The suggested rotation method for vehicles equippedwith all season tires is the “forward-cross” as shown inthe following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IFEQUIPPED • The Tire Pressure Monitor System (TPMS) will warnthe driver of a low tire pressure bas...

CAUTION! • The TPMS has been optimized for the originalequipment tires and wheels. TPMS pressures andwarning have been established for the tire sizeequipped on your vehicle. Undesirable systemoperation or sensor damage may result whenusing replacement equipment that is not of thesame size, type, and...

monitor tire pressure levels. Sensors, mounted to eachwheel as part of the valve stem, transmit tire pressurereadings to the Receiver Module. NOTE: It is particularly important for you to check the tire pressure in all of the tires on your vehicle regularlyand to maintain the proper pressure. The TP...

vehicle may need to be driven for up to 10 minutes above15 mph (25 km/h) in order for the TPMS to receive thisinformation. Check TPMS Warning The Tire Pressure Monitoring Telltale Light will flash onand off for 60 seconds and an audible chime will soundwhen a system fault is detected. The flash cycl...

active road tires. The vehicle may need to be driven forup to 10 minutes above 15 mph (25 km/h) in order forthe TPMS to receive this information. Check TPMS Warning The Tire Pressure Monitoring Telltale Light will flash onand off for 60 seconds and an audible chime will soundwhen a system fault is d...

General Information This device complies with part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference received,including interference that may cause undesired...

content of gasoline may not be indicated on the pump,you should ask your gasoline retailer if his/her gasolinecontains MMT. It is even more important to look for gasolines withoutMMT in Canada, because MMT can be used at levelshigher than allowed in the United States. MMT is pro-hibited in Federal a...

NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap doorreinforcement. Fuel Filler Door Gas Cap Tether Hook STARTING AND OPERATING 241 5

Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuelfiller cap is loose, improperly installed, or damaged, a“Check Gascap” message will display in the ElectronicVehicle Information Center (EVIC). If this occurs, tightenthe fuel filler cap properly and press the odo...

driving. If weighing the loaded vehicle shows that youhave exceeded either GAWR, but the total load is withinthe specified GVWR, you must redistribute the weight.Improper weight distribution can have an adverse effecton the way your vehicle steers and handles and the waythe brakes operate. A loaded ...

TRAILER TOWING Trailer towing with this vehicle is not recommended. RECREATIONAL TOWING (BEHINDMOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHERVEHICLE (Flat towing with all four wheels on theground) Recreational towing for this vehicle is not recommended. NOTE: If the vehicle requires towing, mak...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . 248 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 248 䡵 TIREFIT Tire Repair . . . . . . . . . . . . . . . . . . . . 249 䡵 Jump-Starting Procedures . . . . . . . . . . . . . . . . 254 䡵 Freeing ...

HAZARD WARNING FLASHER The hazard flasher switch is located in the center of theinstrument panel below the center air outlets. To engage the Hazard Warning Flashers, depress theswitch on the instrument panel. When the Hazard Warn-ing Switch is activated, all directional turn signals willflash on and...

control to maximum heat, the Mode control to floor, andthe fan control to HI. This allows the heater core to act asa supplement to the radiator and aids in removing heatfrom the engine cooling system. CAUTION! Driving with a hot cooling system could damageyour vehicle. If temperature gauge reads 240...

The TIREFIT system is located under an access panel inthe trunk. 1. Air pump hose 2. Power plug and cable 3. Air pump switch 4. Pressure gauge 5. TIREFIT sealant bottle 6. TIREFIT sealant hose TIREFIT Location TIREFIT contents 250 WHAT TO DO IN EMERGENCIES

WARNING! • Do not attempt to repair a tire on the side of the vehicleclose to traffic. Pull far enough off the road to avoid thedanger of being hit when operating the jack or repairinga tire. • Cuts or punctures larger than approximately 0.16 in. (4mm), tire damage caused by driving with extremely l...

5. Unscrew the valve cap from the valve on the deflatedtire. 6. Screw the fitting at the end of TIREFIT sealant hose (6)coming from the sealant bottle (5) onto the tire valve. 7. Insert the power plug (2) into the power point on theinstrument panel. 8. Leave the parking brake set and the transmissio...

19. With a tire pressure of no less than 26 psi (1.8 bar)press the air pump switch (3) to 0 (OFF) and turn off theengine. Then, disconnect the TIREFIT system from thetire and place it back in the vehicle. 20. Release the parking brake and drive the vehicle forapproximately 10 minutes to ensure optim...

• Do not operate the electric air pump for more thaneight minutes to avoid overheating. The air pump maybe used again once it has cooled down. • Replace the TIREFIT sealant bottle (5) once every fouryears to assure optimum operation of the system. • If TIREFIT is liquid, clean water and a damp cloth...

NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in theengine compartment for jump-starting. 1. Wear eye protection and remove any metal jewelrysuch as watchbands or bracelets that might make aninadvertent electrical contact. 2. When boost is provi...

WARNING! • You should not try to start your vehicle by push-ing or towing. • Do not connect the cable to the negative post ofthe discharge battery. The resulting electricalspark could cause the battery to explode. • During cold weather when temperatures are be-low freezing point, electrolyte in a di...

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, itcan often be moved by a rocking motion. Turn yoursteering wheel right and left to clear the area around thefront wheels. Then shift back and forth between Reverseand Drive. Usually the least accelerator pedal pressure tom...

If you must use the accessories (wipers, defrosters, etc.)while being towed, the key must be in the ON position,not the ACCESSORY position. Make certain the transmis-sion remains in NEUTRAL. TOWING THIS VEHICLE BEHIND ANOTHERVEHICLE WITH A TOW DOLLY The manufacture does not recommend that you tow th...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine Compartment . . . . . . . . . . . . . . . 263 䡵 Onboard Diagnostic System — OBD II . . . . . . 264 ▫ Loose Fuel Filler Cap . . . . . . . . . . . . . . . . . . 264 䡵 Emissions Inspection And MaintenancePrograms . . . . . . . . . . . . . . . . . . . . . ...

6.1L ENGINE COMPARTMENT MAINTAINING YOUR VEHICLE 263 7

A loose, improperly installed, or damaged fuel filler capmay also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCEPROGRAMS In some localities, it may be a legal requirement to passan inspection of your vehicle’s emissions control system.Failure to pass could preven...

WARNING! You can be badly injured working on or around amotor vehicle. Only do service work for which youhave the knowledge and the proper equipment. Ifyou have any doubt about your ability to perform aservice job, take your vehicle to a competent me-chanic. MAINTENANCE PROCEDURES The pages that fol...

CAUTION! Overfilling or underfilling will cause oil aeration orloss of oil pressure. This could damage your engine. Change Engine Oil Road conditions and your kind of driving affect theinterval at which your oil should be changed. Check thefollowing list to see if any apply to you. • Day or night te...

NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months,whichever comes first. Engine Oil Selection For best performance and maximum protection under alltypes of operating conditions, the manufacturer onlyrecommends full synthetic engine oils that meet the...

Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil andoil filters from your vehicle. Used oil and oil filters,indiscriminately discarded, can present a problem to theenvironment. Contact your dealer, service station, orgovernmental agency for advice on ...

• Do not try to start engine by pushing or towing thevehicle. • Do not idle the engine with any spark plug wiresdisconnected or removed, such as when diagnostictesting, or for prolonged periods during very roughidling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MA...

WARNING! • Battery fluid is a corrosive acid solution and canburn or even blind you. Don’t allow battery fluidto contact your eyes, skin, or clothing. Don’t leanover a battery when attaching clamps. If acidsplashes in eyes or on skin, flush the area imme-diately with large amounts of water. • Batter...

WARNING! • Use only refrigerants and compressor lubricantsapproved by the manufacturer for your air condi-tioning system. Some unapproved refrigerants areflammable and can explode, injuring you. Otherunapproved refrigerants or lubricants can causethe system to fail, requiring costly repairs. Referto...

The external lock cylinders should be lubricated twice ayear, preferably in the fall and spring. Apply a smallamount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant or equivalent directly into the lockcylinder. Windshield Wiper Blades The rubber edges of the wiper blades and the ...

CAUTION! • Mixing of coolants other than specified HOATengine coolants, may result in engine damage andmay decrease corrosion protection. If a non-HOATcoolant is introduced into the cooling system in anemergency, it should be replaced with the speci-fied coolant as soon as possible. • Do not use pla...

NOTE: Mixing coolant types will decrease the life of the engine coolant and will require more frequent coolantchanges. Cooling System Pressure Cap The cap must be fully tightened to prevent loss ofcoolant, and to insure that coolant will return to theradiator from the coolant recovery bottle. The ca...

ground. If ingested by a child, contact a physicianimmediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method fordetermining that the coolant level is adequate. With theengine off and cold, the level of the coolant in the bottleshould be betw...

WARNING! Worn brake hoses can burst and cause brake failure.You could have an accident. If you see any signs ofcracking, scuffing, or worn spots, have the brakehoses replaced immediately. Master Cylinder — Brake Fluid Level Check Check the fluid level in the master cylinder immediatelyif the brake s...

CAUTION! Do not allow petroleum base fluid to contaminatethe brake fluid, all brake seal components could bedamaged causing partial or complete brake failure. Automatic Transmission Fluid Level Check Regular automatic transmission fluid level checks are notrequired. For this reason, the dipstick is ...

Severe Usage (fluid and filter) — Refer to MaintenanceSchedule “B” Severe Usage is defined as: • Police, taxi, limousine, commercial type operation, ortrailer towing where the vehicle is driven regularly for more than 45 minutes of continuous operation. If the transmission is disassembled for any re...

WARNING! Do not use volatile solvents for cleaning purposes.Many are potentially flammable, and if used inclosed areas they may cause respiratory harm. Cleaning Headlights Your vehicle has plastic headlights that are lighter andless susceptible to stone breakage than glass headlights. Plastic is not...

If the belts need cleaning, use Mopar 威 Total Clean, a mild soap solution, or lukewarm water. Do not remove thebelts from the vehicle to wash them. Replace the belts if they appear frayed or worn or if thebuckles do not work properly. Cleaning The Center Console Cup Holders Perform the following ste...

Cavity Car-tridgeFuse MiniFuse Description 1 — — — 2 — — — 3 — 15 AmpBlue Adjustable Pedals - ifequipped 4 — 20 AmpYellow AC Clutch/Horn 5 — — — 6 — 15 AmpBlue Front Control Module(FCM) 7 — 20 AmpYellow Fog Lights 8 — 15 AmpBlue Lights – License, Park,Side Marker, Stop, Turn 9 — 15 AmpBlue Front Con...

Cavity Car-tridgeFuse MiniFuse Description 20 20 AmpBlue — Starter 21 50 AmpRed — Anti-lock Brakes System(ABS) Pump Motor 22 40 AmpGreen — AC Clutch/Radiator FanHigh — Low 23 — — — 24 60 AmpYellow — Radiator Fan 25 30 AmpPink — Front Control Module(FCM) 26 — — — 27 30 AmpPink — Front Control Module(...

Cavity Car-tridgeFuse MiniFuse Description 1 60 AmpYellow — Ignition Off Draw (IOD) 2 40 AmpGreen — Battery 3 — — — 4 40 AmpGreen — Battery Cavity Car-tridgeFuse MiniFuse Description 5 40 AmpGreen — Heated Seats - ifequipped 6 — 20 AmpYellow Fuel Pump 7 — 20 AmpYellow Amplifier — Subwoofer 8 — 15 Am...

Cavity Car-tridgeFuse MiniFuse Description 17 — 20 AmpYellow Cluster 18 — 20 AmpYellow Selectable Power Outlet 19 — 10 AmpRed Stop Lights 20 — — — 21 — — — 22 — — — 23 — — — 24 — — — 25 — — — 26 — — — 27 — 10 AmpRed Airbag/Airbag ControlModule (ACM) 28 — 10 AmpRed Curtain Airbag - ifequipped Cavity ...

Cavity Car-tridgeFuse MiniFuse Description 35 — 5 AmpOrange Amplifier - if equipped/Antenna/IgnitionDelay/OverheadConsole/Passenger DoorLock & Express PowerWindow Switch - ifequipped/Power Mir-rors - if equipped/RearDefrost 36 — 20 AmpYellow Hands Free Phone - ifequipped/Media SystemMonitor DVD ...

Cavity 13. If you experience temporary or permanent lossof these systems, see your authorized dealer for service. CAUTION! • When installing the Power Distribution Centercover, it is important to ensure the cover is prop-erly positioned and fully latched. Failure to do somay allow water to get into ...

BULB REPLACEMENT Low Beam Headlight, High Beam Headlight,Park/Turn Light, and Front Side Marker Light 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assem-bly on the driver side of the vehicle. 2. Twist the appropriate bul...

Backup Light, Side Marker Light, Tail/Turn Light,and Tail/Stop Light 1. Open the Trunk. 2. Remove two fasteners from the back of the tail lightassembly. 3. Pull back the trunk liner. 4. Remove the remaining fastener from the back of thetail light assembly. 5. Push the electrical connector locking ta...

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance . . . . . . 308 䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . . 308 ▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 311 ▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . . 321 8 M A I N TE N A ...

• Taxi, police, or delivery service (commercial ser-vice). 〫 • Off-road or desert operation. NOTE: If ANY of these apply to you, then change your engine oil every 3,000 miles (5 000 km) or 3 months,whichever comes first, and follow the maintenance rec-ommendations in Schedule “B” in this section. NO...

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter, if notreplaced at 3 months. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the air cleaner filter. X* Insp...

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter, if notreplaced at 3 months. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the air cleaner filter. X I...

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (110 000) (115 000) (120 000) Change engine oil and engine oil filter, if notreplaced at 3 months. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the air cleaner filter...

SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the a...

Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (110 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter. X X X X X X Inspect the air cleaner filter and replace if required.* X X X X X Replace the air cleaner...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 ▫ Prepare For The Appointment . . . . . . . . . . . . 328 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 328 ▫ Be Reasonable ...

Service Contract You may have purchased a service contract for yourvehicle to help protect you from the high cost of unex-pected repairs after your manufacturer’s new vehiclelimited warranty expires. The manufacturer stands be-hind only the manufacturer’s Service Contracts. If youpurchased a manufac...

REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If youbelieve that your vehicle has a defect, which could causea crash or cause injury or death, you should immediatelyinform the National Highway Traffic Safety Administra-tion (NHTSA) in addition to notifying the manufacturer. I...