Dodge 2006 Magnum SRT8 - Manuals

VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehiclecould seriously affect its roadworthiness and safetyand may lead to an accident resulting in seriousinjury or death. INTRODUCTION 7 1

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 11 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . . 11 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .12 ▫ Horn . . . . . . . . . . . . . . . . . . . . . . . . . . ....

A WORD ABOUT YOUR KEYS You can insert the double sided keys into the locks witheither side up. The dealer that sold you your new vehicle has the keycode numbers for your vehicle locks. These numbers canbe used to order duplicate keys from your dealer. Askyour dealer for these numbers and keep them i...

Refer to Personal Settings in the electronic vehicle infor-mation center (EVIC) Section of this manual for details. WARNING! Leaving children in a vehicle unattended is danger-ous for a number of reasons. A child or others couldbe injured. Children should be warned not to touchthe parking brake, bra...

The Sentry Key Immobilizer System does not need to bearmed or activated. Operation of the system is automaticregardless of whether or not the vehicle is locked orunlocked. During normal operation, the Theft Alarm/Immobilizer Light will come on for three (3) secondsimmediately after the ignition swit...

At the time of purchase, the original owner is providedwith a four digit PIN number. This number is requiredfor dealer replacement of keys. Duplication of keys maybe performed at an authorized dealer or by using theCustomer Key Programming procedure. This procedureconsists of programming a blank key...

General Information The Sentry Key system complies with FCC rules part 15and with RSS-210 of Industry Canada. Operation issubject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may bereceived, including interference that...

WARNING! • For personal security and safety in the event of anaccident, lock the vehicle doors as you drive aswell as when you park and leave the vehicle. • When leaving the vehicle always remove the keyfrom the ignition lock, and lock your vehicle. Donot leave children unattended in the vehicle, or...

Automatic Door Locks The doors will lock automatically on vehicles with powerdoor locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h)...

Child Protection Door Lock To provide a safer environment for small children ridingin the rear seats, the rear doors are equipped with a childprotection door lock system. WARNING! Avoid trapping anyone in the vehicle in a collision.Remember that the rear doors can only be openedfrom the outside when...

REMOTE KEYLESS ENTRY This system allows you to lock or unlock the doors, oractivate the panic alarm from distances up to about 23feet (7 meters) using a hand held radio transmitter. Thetransmitter need not be pointed at the vehicle to activatethe system. NOTE: If the key is in the ignition switch, t...

• This device must accept any interference received,including interference that may cause undesired op-eration. If your Remote Keyless Entry transmitter fails to operatefrom a normal distance, check for these two conditions. 1. A weak battery in the transmitter. The expected life ofthe battery is a ...

VEHICLE THEFT ALARM This system monitors the vehicle doors and ignitionswitch for unauthorized entry or operation. When thealarm is activated, the system provides both audible andvisual signals. The horn will pulse, headlights/parklights will flash, the Vehicle Theft Alarm/Immobilizerlight, located ...

• The system remains armed during liftgate entry. Ifsomeone enters the vehicle through the liftgate andopens any door the alarm will sound. • When the system is armed, the doors can not beunlocked from the interior power door lock switches. The Vehicle Theft Alarm system is designed to protectyour v...

The window lock switch on the driver’s door allows youto disable the window controls on the passenger doors.When the lock switch is pressed the window controls onthe passenger doors will not illuminate and the passen-ger windows will be disabled. WARNING! Never leave children in a vehicle, with the ...

To close the window part way, lift the window switch tothe first detent and release when you want the window tostop. The power window switches remain active for 10 min-utes after the ignition switch has been turned off. Thetime is customer programmable through the electronicvehicle information cente...

Wind Buffeting Wind buffeting can be described as the perception ofpressure on the ears or a helicopter type sound in theears. Your vehicle may exhibit wind buffeting with thewindows down, or the sunroof (if equipped) in certainopen or partially open positions. This is a normal occur-rence and can b...

WARNING! • Driving with the liftgate open can allow poison-ous exhaust gases into your vehicle. You and yourpassengers could be injured by these fumes. Keepthe liftgate closed when you are operating thevehicle. • If you are required to drive with the liftgate open,make sure that all windows are clos...

WARNING! In a collision, you and your passengers can suffermuch greater injuries if you are not properly buck-led up. You can strike the interior of your vehicle orother passengers, or you can be thrown out of thevehicle. Always be sure you and others in yourvehicle are buckled up properly. Buckle u...

WARNING! • Wearing a seat belt incorrectly is dangerous. Seatbelts are designed to go around the large bones ofyour body. These are the strongest parts of yourbody and can take the forces of a collision thebest. Wearing your belt in the wrong place couldmake your injuries in a collision much worse. ...

WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ridetoo high on your body, possibly causing internalinjuries. Always buckle your belt into the bucklenearest you. • A belt that is too loose will not protect you as well. In a sudden stop you...

activated. To reset this feature you must let all of thebelt webbing return into the retractor. You will not beable to pull out more webbing until all of the webbinghas been returned back into the retractor. WARNING! The rear center lap/shoulder belt is equipped with alock-out feature to ensure that...

Pretensioners The seat belts for both front seating positions areequipped with pretensioning devices that are designed toremove any slack from the seat belts in the event of acollision. These devices improve the performance of theseat belt system by assuring that the belt is tight about theoccupant ...

3. Within 60 seconds of turning the ignition switch to theON position, unbuckle and then re-buckle the driver’sseat belt at least three times within 10 seconds, endingwith the seat belt buckled. NOTE: Watch for the Seat Belt Warning Light to turn on while unbuckling and off while re-buckling the sea...

Keep the belt low so that it does not come across theabdomen. That way the strong bones of the hips will takethe force if there is a collision. Seat Belt Extender If a seat belt is too short, even when fully extended andwhen the adjustable upper shoulder belt anchorage (if soequipped) is in its lowe...

This vehicle may also be equipped with left and rightside curtain airbags to protect the driver and passengerssitting next to a window. If the vehicle is equipped withside curtain airbags, they are located above the sidewindows. Their covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not b...

Airbags inflate in moderate to high speed impacts. Alongwith the seat belts, front airbags work with the instru-ment panel knee bolsters to provide improved protectionfor the driver and front passenger. Left and right sidecurtain airbags also work with seat belts to improveoccupant protection. The s...

detects a malfunction in any part of the system, it turnson the light either momentarily or continuously. WARNING! Ignoring the AIRBAG light in your instrument panelcould mean you won’t have the airbags to protectyou in a collision. If the light does not come on, stayson after you start the vehicle,...

you might get sliding along a carpet or gymnasiumfloor. They are not caused by contact with chemicals.They are not permanent and normally heal quickly.However, if you haven’t healed significantly within afew days, or if you have any blistering, see your doctorimmediately. • As the airbags deflate yo...

If the is a fault present in the OCS, the Airbag WarningLight (a red light located in the center of the instrumentcluster directly in front of the driver) will be turned on.This indicates that you should take the vehicle to anauthorized dealer. The Airbag Warning Light is turned onwhenever there is ...

The bags fully inflate in about 50 - 70 milliseconds.This is about half of the time it takes to blink your eyes.The bags then quickly deflate while helping to restrainthe driver and front passenger. The driver’s frontairbag gas is vented through vent holes in the sides ofthe airbag. The passenger’s ...

WARNING! Unapproved modifications or service procedures tothe front passenger seat assembly, its related compo-nents, or seat cover may inadvertently change theairbag deployment in case of a frontal crash. THISCOULD RESULT IN DEATH OR SERIOUS INJURYTO THE FRONT SEAT PASSENGER IF THE VE-HICLE IS INVO...

Data Parameters that May Be Recorded: • Diagnostic trouble code(s) and warning lamp statusfor electronically-controlled safety systems, includingthe airbag system • Airbag disable lamp status (if equipped) • ⬙ Time ⬙ of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag dep...

Children Too Large For Booster Seats Children who are large enough to wear the shoulder beltcomfortably, and whose legs are long enough to bendover the front of the seat when their back is against theseat back, should use the lap/shoulder belt in a rear seat. • Make sure that the child is upright in...

rear-seating positions or if your child restraints are notLATCH-compatible, install the restraints using the vehi-cle’s seat belts. Installing the LATCH-Compatible Child RestraintSystem We urge that you carefully follow the directions of themanufacturer when installing your child restraint. Not allc...

You will first loosen the adjusters on the lower straps andon the tether strap so that you can more easily attach thehooks or connectors to the vehicle anchorages. Nextattach the lower hooks or connectors over the top of theseat cover material. Then rotate the tether anchoragecover directly behind t...

installed. Refer to the Automatic Locking Mode sectionfor details. A locking clip should not be necessary oncethe automatic locking feature is enabled. Position theshoulder and lap belt on the child restraint. The auto-matic locking retractor is activated by first attaching thechild seat, then pulli...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .63 ▫ Automatic Dimming Inside Mirror —If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .63 ▫ Driver’s Si...

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rearwindow. A two point pivot system allows for horizontaland vertical adjustment of the mirror. Annoying headlight glare can be reduced by moving thesmall control under the mirror to the night position(toward rear o...

Power Remote-Control Mirrors The power mirror switch is located on the driver’s doortrim panel next to the power door lock switch. A rotaryknob selects the left mirror, right mirror, or off position. After selecting a mirror move the knob in the samedirection you want the mirror to move. Use the cen...

The UConnect™ system can be used with any Hands-Free Profile certified Bluetooth™ cellular phone. If yourcellular phone supports a different profile (eg., HeadsetProfile), you may not be able to use any UConnect™features. Refer to your cellular service provider or thephone manufacturer for details. ...

The following are general phone to UConnect™ Systempairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the voice on beep, say ⬙ Pair a Phone. ⬙ • You will be asked to say a four-digit pin ...

Delete UConnect™ Paired Cellular Phones • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • At the next prompt, say ⬙ Delete. ⬙ • The phone names (along with priority numbers) willbe played. • When prompted say the priority number ...

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main ...

WARNING! Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seat couldcause you to lose control. The seat belt might not beproperly adjusted and you could be injured. Adjustthe seat only while the vehicle is parked. CAUTION! Do not place any article under a power se...

Lumbar Support This feature allows you to increase or decrease theamount of lumbar support. Turn the control lever for-ward to increase and rearward to decrease the desiredamount of lumbar support. Heated Seats—If Equipped Heated seats, which are available only with leatherupholstery, provide comfor...

Pressing the switch a second time will select low-levelheating. Pressing the switch a third time will shut theheating elements off. When high-temperature heating is selected, the heatersprovide a boosted heat level during the first four minutesof operation after heating is activated. The heat output...

Folding Rear Seat The rear seatbacks can be folded forward to provide anadditional storage area. Pull on the loops shown in theillustration to fold down either or both seatbacks. Theseloops can be tucked away when not in use. When the seat back is folded to the upright position makesure it is latche...

ADJUSTABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedalsto move toward or away from the driver to provideimproved position with the steering wheel. The adjust-able pedal system is designed to allow a greater range ofdriver comfort for steering wheel tilt and seat pos...

TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pullthe hood release lever located under the left side of theinstrument panel. Next, move to the outside of the vehicle and push thesafety catch to the left. The safety catch is located underthe center front edge of the...

WARNING! If the hood is not fully latched, it could fly up whenthe vehicle is moving and block your forward vision.You could have a collision. Be sure all hood latchesare fully latched before driving. LIGHTS Overhead Console Map/Reading Lights These lights are mounted between the sun visors on theov...

Dimmer Control The dimmer control is part of theheadlamp switch, and is located on theleft side of the instrument panel. Withthe parking lights or headlights on,rotating the dimmer control upwardwill increase the brightness of the in-strument panel lights. Dome Light Position Rotate the dimmer contr...

Daytime Running Lights (Canada Only) The high beam headlights will come on as DaytimeRunning Lights whenever the ignition switch is on, theheadlights are off, and the parking brake is off. Theheadlight switch must be used for normal night timedriving. Lights-on Reminder If the headlights or parking ...

partially up or down without moving beyond the detent.Releasing the lever at the detent will provide 3 flashes. If either light has a very fast flash rate, check for adefective outside light bulb. If an indicator fails to lightwhen the lever is moved, it would suggest that the fuseor indicator bulb ...

first detent position, then turn the end of the lever toselect the desired delay interval. There are 6 possibledelay wiper positions. The delay can be regulated from amaximum of approximately 23 seconds between cycles,to a cycle every second. Mist Feature Push the wiper lever in to activate a single...

range, the wiper will operate for two wipe cycles after thelever is released, and then resume the intermittent inter-val previously selected. If the lever is pushed while in the OFF position, thewipers will operate for two wipe cycles, then turn OFF. Rear Windshield Washer To use the rear washer, pu...

TILT/TELESCOPING STEERING COLUMN Unlock the steering column by pulling out the handlelocated directly below the column. To tilt the columnmove the steering wheel up or down as desired. Tolengthen or shorten the steering column pull out or pushin the steering wheel. Lock the steering column inpositio...

help avoid skidding on slippery surfaces during braking.Refer to “Anti-Lock Brake System” in Section 5 of thismanual for more information about ABS. TCS (Traction Control System) This system monitors the amount of wheel spin of each ofthe driven wheels. If wheel spin is detected, brakepressure is ap...

ESP/TCS Indicator Light The yellow ESP/TCS Indicator Light located inthe instrument cluster comes on when theignition switch is turned to the “ON” position.The light should go out with the engine run- ning, unless the system has been turned off. The ESP/TCS Indicator Light starts to flash as soon as...

Partial ESP This mode is entered by momentarily pressing the ⬙ ESP OFF ⬙ button. When in ⬙ Partial ESP ⬙ mode, the TCS portion of ESP has been disabled, and the ⬙ ESP/ TCS Indicator Light ⬙ will be illuminated. This mode is intended to be used to for a more spirited drivingexperience, or if the vehi...

NOTE: • The ESP/TCS Indicator Light and the ESP/BAS Warn-ing Lamp comes on momentarily each time the igni-tion switch is placed the ON position. • Each time the ignition switch is placed in the ONposition, the ESP System will be ON even if it wasturned off previously. • The ESP Control System will m...

On some models an indicator light will illumi-nate in the instrument cluster when the elec-tronic speed control is active. WARNING! Leaving the Electronic Speed Control system onwhen not in use is dangerous. You could accidentlyset the system or cause it to go faster than you want.You could lose con...

To decrease speed while speed control is set, push thelever down and hold (“COAST”). Release the lever whenthe desired speed is reached, and the new speed will beset. Pushing down and releasing the lever (“COAST”) oncewill result in a 1 mph (2 km/h) speed decrease. Each timethe lever is pushed down ...

OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains courtesy/reading lights,an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and optional power sunroofswitches. Courtesy/Reading Lights At the forward end of the console are two courtesy/reading lights. Press th...

The Electronic Vehicle Information Center (EVIC) fea-tures a driver-interactive display which includesHomeLink system messages. The EVIC is located in theinstrument cluster below the speedometer. 1. Press and hold the two outer HomeLink buttons, andrelease only when the EVIC display shows “ChannelsC...

complete the programming of a rolling code equippeddevice (most common garage door openers require thisstep). 6. At the garage door opener receiver (motor-head unit)in the garage, locate the ⬙ learn ⬙ or ⬙ smart ⬙ button. This can usually be found where the hanging antenna wire isattached to the mot...

This device complies with part 15 of FCC rules and withRSS-210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference that may bereceived including interference that may cause undes-ired operat...

Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing,press the switch forward and hold for two seconds afterthe reversal occurs. This allows the sunroof to movetowards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. Venting Sunroof -...

NOTE: If desired, the power outlet next to the ash tray receiver (if equipped) can be converted by your autho-rized dealer to provide power with the ignition switch inthe LOCK position. The center console outlet is powered directly from thebattery (power available at all times). Items plugged intoth...

The auxiliary outlet is also powered directly from thebattery (power available at all times). Items plugged intothis outlet may discharge the battery and/or preventengine starting. Auxiliary Power Outlet 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in drawpower from the vehicle’s battery, even when not inuse (i.e. cellular phones, etc.). Eventually, if pluggedin long enough, the vehicle’s battery will dischargesufficiently to degrade battery life and/or preve...

Rear Seat Cupholders The rear seat cupholders are located in the center armrestbetween the rear seats. The cup holders are positionedforward in the armrest and side-by-side to provideconvenient access to beverage cans or bottles whilemaintaining a resting place for the rear occupants’ el-bows. STORA...

Cargo Management System — If Equipped The cargo area has an upper and lower load floor.Additional innovative features in the cargo area are thetwo molded-in bins in the quarter trim panels. Each binthat hold a gallon of milk and a 2-liter bottle of pop. A cargo management system that stores on the l...

Rollaway Tonneau Cover — If Equipped The tonneau cover consists of a standard, removablerollaway tonneau cover that is mounted in the rear cargoarea behind the seats. Notches in the trim panels close tothe liftgate secure the extended cover in place to keepitems out of sight. The tonneau cover can a...

Next pull the tonneau cover using the handle and insertthe rear posts by following the guides along each side ofthe rear compartment making sure the cover is fullyseated. Waterproof Liner The optional waterproof liner can be placed over thelower load floor. Rear Attachment Points Waterproof Liner 12...

Cargo Organizer The optional cargo organizer can also be placed into thelower load floor. Lift the handle and pull to open thecargo organizer. Cargo Tie-Down Hooks The tie-downs located on cargo area floor and on the reartrim panels should be used to safely secure loads whenvehicle is moving. Cargo ...

ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails are designed to carry theweight on vehicles equipped with a luggage rack. Theload must not exceed 150 lbs (68 kg), and should beuniformly distributed over both luggage rack crossbars. Distribute cargo weight evenly on the roof rack crossbar...

CAUTION! • To avoid damage to the roof rack and vehicle, do notexceed the maximum roof rack load capacity of 150lbs (68 kg). Always distribute heavy loads as evenlyas possible and secure the load appropriately. • Long loads which extend over the windshield, suchas wood panels or surfboards, or loads...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instruments And Controls . . . . . . . . . . . . . . . . 132 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . 133 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 134 䡵 Electronic Vehicle Information Center(EVIC) . . . . . . . . . ....

INSTRUMENTS AND CONTROLS 132 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER UNDERSTANDING YOUR INSTRUMENT PANEL 133 4

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank whenthe ignition switch is in the ON position. 2. Trip Odometer Button Press this button to change the display from odometer toeither of the two trip odometer settings. The letter “A” or“B” will appear...

• Right Front Low Pressure (with a single chime). Referto “Starting And Operating, Tire Section” • Right Rear Low Pressure (with a single chime). Referto “Starting And Operating, Tire Section” • Check TPM System (with a single chime). Refer to“Starting And Operating, Tire Section” Trip Functions Pre...

currently being displayed. To reset all resettable func-tions, press and release the FUNCTION SELECT button asecond time within 3 seconds of resetting the currentlydisplayed function (>Reset ALL will be displayed duringthis 3 second window). Compass Display Press and release the compass button to...

To set the variance: Turn the ignition switch ON. Press and hold the compass button for approximately 2 sec-onds. Use the SCROLL buttons until “Compass Variance”is highlighted. The “Compass Variance” message and thelast variance zone number will be displayed. Press andrelease FUNCTION SELECT button ...

The EVIC displays this symbol to indicate thatthe U-Connect phone is currently not available. Navigation — If Equipped Navigation Display Control Press and release the MENU button until Navigation isdisplayed in the EVIC. When the Navigation System isOn, the steering wheel buttons can be used to sel...

Personal Settings (Customer ProgrammableFeatures) This allows the driver to set and recall features when thetransmission is in PARK. Press and release the MENU button until Personal Set-tings is displayed in the EVIC. Use the SCROLL buttons to display one of the followingchoices: Language When in th...

Turn Headlamps on with Remote Key Unlock When this feature is selected the headlamps will activateand remain on for up to 90 seconds when the doors areunlocked using the remote keyless entry transmitter.Press and release the FUNCTION SELECT button whenin this display until “OFF”, “30 sec.”, “60 sec....

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pressthe ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volu...

equipped) frequencies, pausing for 5 seconds at eachlistenable station before continuing to the next. To stopthe search, press SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button, causes the tuner to scanthrough preset stations, in either AM, FM or Satellite (ifequipped) frequenc...

Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CDlabel facing up. The CD will automatically be pulled intothe CD Player and the CD icon w...

TIME Button (CD Mode) Press this button to change the display from elapsed CDplaying time to time of day. The time of day will bedisplayed for 5 seconds. RW/FF (CD Mode) Press and hold the FF (Fast Forward) and the CD playerwill begin to fast forward until FF is released. The RW(Reverse) button work...

SALES CODE RAK – AM/FM/CASSETTE/CD(6-DISC) RADIO WITH OPTIONAL SATELLITERADIO, HANDS FREE PHONE, VIDEO, MP3, andWMA CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or A...

Top 40 Top_40 Country Country Oldies Oldies Soft Soft Nostalgia Nostalgia Jazz Jazz Classical Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Soft_R_&_B Foreign Language Foreign_Language Religious Music Religious_Music Religious Talk Religious_Talk Personality Personality Publi...

Noise Reduction The Dolby Noise Reduction System* is on whenever thetape player is on, but may be switched off. To turn off the Dolby Noise reduction System: PressPreset 1 after you insert the tape. The NR light in thedisplay will go off when the Dolby System is off. * ”Dolby” noise reduction manufa...

RW/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forward) and the CD player willbegin to fast forward until FF is released or RW oranother CD button is pressed. The RW (Reverse) buttonworks in a similar manner. TUNE Control (CD MODE for CD Audio Play) Pressing the TUNE control allows the se...

ID3 Tag information for artist, song title and album titleare supported for version 1 ID3 tags. ID3 version 2 is notsupported by the radios. Playlist files are not supported. MP3 Pro files are notsupported. Playback of MP3 and WMA Files When a medium containing MP3 data is loaded, theradio checks al...

PTY Button ⴖ SEEK ⴖ When the desired program is obtained, press the ⬙ SEEK ⬙ button within five seconds. The channel will change tothe next channel that matches the program type selected. Satellite Antenna To ensure optimum reception, do not place items on theroof around the rooftop antenna location...

selecting a variety of destinations and routes. The unitalso provides an AM/FM stereo radio and six-disc CDchanger with MP3 capability. Mapping information for navigation is supplied on aDVD that is loaded into the unit. One map DVD coversall of North America. Refer to your “Navigation User’sManual”...

RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception undermost operating conditions. Like any system, however, carradios have performance limitations, due to mobile op-eration and natural phenomena, which might lead you tobelieve your sound system is malf...

CASSETTE TAPE AND PLAYER MAINTENANCE To keep the cassette tapes and player in good condition,take the following precautions: 1. Do not use cassette tapes longer than C-90; otherwise,sound quality and tape durability will be greatly dimin-ished. 2. Keep the cassette tape in its case to protect fromsl...

7. Do not store the disc where temperatures may becometoo high. RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being On inyour vehicle can cause erratic or noisy performance fromyour radio. This condition may be lessened or eliminatedby relocating the cellular phone...

Mode Selection The mode selector (the right rotaryknob) can be placed in several posi-tions. Dots between each of the modeselections identify intermediate modesthat allow the occupants to fine tuneairflow distribution. Defrost Air is directed to the windshield through theoutlets at the base of the w...

is re-used. Use this mode to rapidly cool the inside ofthe vehicle. The Recirculation mode can also be usedto temporarily block out outside odors, smoke, anddust. Window Fogging Interior fogging on the windshield can be quickly re-moved by turning the mode selector to Defrost. TheDefrost/Floor mode ...

• On vehicles equipped with diesel engines the blowerfan will initially operate at a minimum speed toprovide you with maximum comfort in the fan auto-matic mode during cold weather start-ups. Then, asthe engine warms up the fan will gradually increase itsspeed. This feature will avoid blowing cold a...

the rear window defroster is ON. The defroster automati-cally turns off after approximately 10 minutes of opera-tion for the first push of the button, and will turn off afterapproximately 5 minutes for the second push of thebutton. CAUTION! To avoid damaging the electrical conductors of therear wind...

Winter Operation Use of the air Recirculation mode during winter monthsis not recommended because it may cause windowfogging. NOTE: See Operating Tips chart (for Manual A/C Control) at the end of this section for suggested controlsettings in different weather conditions. Vacation Storage Anytime you...

Operating Tips 186 UNDERSTANDING YOUR INSTRUMENT PANEL

STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 190 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 190 䡵 Transmission Shifting . . . . . . . . . . . . . . . . . . . 192 ▫ 5 Speed Automatic Transmission . . . . . . . . . . 192 ▫ Automatic T...

STARTING PROCEDURES CAUTION! Long periods of engine idling, especially at highengine speeds, can cause excessive exhaust tempera-tures which can damage your vehicle. Do not leaveyour vehicle unattended with the engine running. WARNING! Do not leave animals or children inside parkedvehicles in hot we...

WARNING! • Do not attempt to push or tow your vehicle to getit started. Vehicles equipped with an automatictransmission cannot be started this way. Un-burned fuel could enter the catalytic converter andonce the engine has started, ignite and damage theconverter and vehicle. If the vehicle has a dis-...

After Starting The idle speed will automatically decrease as the enginewarms up. TRANSMISSION SHIFTING 5 Speed Automatic Transmission WARNING! Unintended movement of a vehicle could injurethose in and near the vehicle. As with all vehicles,you should never exit a vehicle while the engine isrunning. ...

Park Position The PARK position is to be used when parking thevehicle. Engage only with the vehicle stopped. The PARKposition is not intended to serve as a brake when thevehicle is parked. Rather, the driver should always usethe parking brake in addition to placing the selector leverin PARK to secur...

NOTE: To avoid overrevving the engine when the selector lever is moved in “D -” direction, the transmis-sion will not shift to a lower gear if the engine’s revolu-tions per minute limit would be exceeded. Briefly press the selector lever in the “D +” direction. Thetransmission will shift from the cu...

A reset feature is available to allow the vehicle to bedriven to a dealer for service. To reset the transmission,use the following procedure: 1. Stop the vehicle. 2. Move the selector lever to the PARK position. 3. Turn off the engine. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Move...

Automatic Transmission — General Information CAUTION! Damage to the transmission may occur if the follow-ing precautions are not observed: • Shift into PARK only after the vehicle has come toa complete stop. • Shift into or out of REVERSE only after thevehicle has come to a complete stop and theengi...

Brake Transmission Shift Interlock System This vehicle is equipped with a brake transmission shiftinterlock system (BTSI) that holds the gearshift lever inthe P (Park) position when the ignition switch is in theLOCK position. To move the gear selector lever out of theP (Park) position, the ignition ...

An UPSHIFT message will appear in the ElectronicVehicle Information Center (EVIC) portion of your instru-ment cluster when using Autostick. This message ap-pears in order to alert the driver to upshift to the nextgear. The UPSHIFT message will display while operatingthe vehicle at higher engine revo...

PARKING BRAKE When the parking brake is applied with the ignitionswitch on, the brake light in the instrument cluster willturn on. NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. Before leaving the vehicle, make sure that the parkingbr...

WARNING! The Anti-Lock Brake System contains sophisticatedelectronic equipment that may be susceptible tointerference caused by improperly installed or highoutput radio transmitting equipment. This interfer-ence can cause possible loss of anti-lock brakingcapability. Installation of such equipment s...

• European Metric tire sizing is based on Europeandesign standards. Tires designed to this standard havethe tire size molded into the sidewall beginning withthe section width. The letter ⬙ P ⬙ is absent from this tire size designation. Example: 215/65R15 96H • LT(Light Truck)-Metric tire sizing is b...

Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = S...

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load correspondingto its load index under certain operating conditions.—The maximum speed correspon...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tirehowever the date code may only be on one side. Tireswith white sidewalls will have the full TIN includingdate code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black side...

Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side“B” pillar. Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can...

Loading The vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load carrying capacity if youadhere to the loading conditions, tire size and cold tireinflation pressures specified on the Tire and LoadingInformation pla...

2. Economy— Improper inflation pressures can cause uneven wearpatterns to develop across the tire tread. These abnormalwear patterns will reduce tread life resulting in a need forearlier tire replacement. Underinflation also increases tirerolling resistance and results in higher fuel consumption. 3....

CAUTION! After inspecting or adjusting the tire pressure al-ways reinstall the valve stem cap–if equipped. Thiswill prevent moisture and dirt from entering thevalve stem, which could damage the valve stem. Inflation pressures specified on the placard are always“cold tire inflation pressure”. Cold ti...

WARNING! High speed driving with your vehicle under maxi-mum load is dangerous. The added strain on yourtires could cause them to fail. You could have aserious accident. Don’t drive a vehicle loaded to themaximum capacity at continuous speeds above 75mph (120 km/h). Radial-Ply Tires WARNING! Combini...

Tread Wear Indicators Tread wear indicators are in the original equipment tiresto help you in determining when your tires should bereplaced. These indicators are molded into the bottom of the treadgrooves and will appear as bands when the tread depthbecomes 1/16 inch (2 mm). When the indicators appe...

Replacement Tires The tires on your new vehicle provide a balance of manycharacteristics. They should be inspected regularly forwear and correct cold tire inflation pressure. The manu-facturer strongly recommends that you use tires equiva-lent to the originals in size, quality and performancewhen re...

CAUTION! Replacing original tires with tires of a different sizemay result in false speedometer and odometer read-ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sidedwear. • Vehicle pull to right or left. Tires ma...

NOTE: • The TPM system can inform the driver of a low tirepressure condition. • The TPM system is not intended to replace normal tirecare and maintenance, nor to provide warning of a tirefailure or condition. • The TPM system should not be used as a tire pressuregauge while adjusting your tire press...

Modules mounted in three of the four wheel wells,various Tire Pressure Monitoring System Display Mes-sages in the EVIC, and an amber colored Indicator Lamp. NOTE: For vehicles with optional wheel/tire sizes and significantly different tire placard pressures, the placardpressure value and the low-pre...

TIRE CHAINS If driving conditions require tire chains for your vehicle,chains that meet SAE class “S” requirements can be used,but they must be installed on 245/45ZR20 size tires.Contact your local dealership or tire dealer for these tiresizes. CAUTION! To avoid damage to your vehicle or tires, obse...

NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of timeon dry pavement. Observe the tire chain manufacturer’sinstructions on method of installation, operating speed,and conditions for usage. Always use the lower suggested operating speed if botht...

• The use of fuel additives which are now being sold asoctane enhancers are not recommended. Most of theseproducts contain high concentrations of methanol.Fuel system damage or vehicle performance problemsresulting from the use of such fuels or additives are notthe responsibility of the manufacturer...

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on theleft side of the vehicle. Push in on the left side (near theedge) of the fuel filler door to access the fuel filler cap. Ifthe gas cap is lost or damaged, be sure the replacementcap is for use with this ve...

NOTE: • Tighten the gas cap until you hear a “clicking” sound.This is an indication that the gas cap is properlytightened. If the gas cap is not secured properly theMalfunction Indicator Light in the instrument clusterwill turn on. Make sure that the gas cap is tightenedeach time the vehicle is refu...

VEHICLE LOADING The load carrying capacity of your vehicle is shown in thecharts that follow. This information should be used forpassenger and luggage loading as indicated. If the seatbacks are folded for carrying cargo, do notexceed the specified GVWR and GAWR. Vehicle Certification Label Your vehi...

FrontAxle Rear Axle Empty Weight 2054 lbs(932 kg) 1805 lbs (819 kg ) Load (Including driver, pass-sengers and cargo) 271 lbs (123 kg) 579 lbs (263 kg) Total 2325 lbs (1055 kg) 2384 lbs (1081 kg) GAWR 2546 lbs (1155 kg) 2708 lbs (1228 kg) TRAILER TOWING In this section you will find safety tips and i...

Gross Trailer Weight (GTW) The gross trailer weight (GTW) is the weight of the trailerplus the weight of all cargo, consumables and equipment(permanent or temporary) loaded in or on the trailer in its ⬙ loaded and ready for operation ⬙ condition. The recom- mended way to measure GTW is to put your f...

Weight-Distributing Hitch A weight-distributing hitch includes a receiver attachedto the tow vehicle, plus a removable hitch head andspring bar assembly that fits into the receiver openingand hook up brackets that connect the spring bars to thetrailer frame. Trailer Hitch Classification Your vehicle...

Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. 6.1L Automatic 40 SQ. FT. (3.72 square meters) Up to 2 persons & Lug-gage 3,800 lbs (1724 kg) 380 lbs (172 kg) 40 SQ. FT. (3.72 square meters) Up to 3 persons & Lug-gage 3,000 lbs (1361 kg) 300 lbs (136 kg) 40 SQ. ...

Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight inthe front of the trailer. This places 10% to 15% of theGross Trailer Weight (GTW) on the tow hitch of yourvehicle. Loads balanced over the wheels or heavier in therear can cause the trailer to sway severely side to side ...

Towing Requirements To promote proper break-in of your new vehicle driv-etrain components the following guidelines are recom-mended: CAUTION! • Avoid towing a trailer for the first 500 miles (805km) of vehicle operation. Doing so may damageyour vehicle. • During the first 500 miles (805 km) of trail...

− An electronically actuated trailer brake controller is required when towing a trailer with electronicallyactuated brakes. When towing a trailer equipped witha hydraulic surge actuated brake system, an electronicbrake controller is not required. − Trailer brakes are recommended for trailers over 1,...

Towing Tips — Cooling System To reduce potential for engine and transmission over-heating, take the following actions: − City Driving When stopped for short periods of time, put transmissionin neutral and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning Turn off tempora...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . 250 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 250 䡵 TIREFIT Tire Repair . . . . . . . . . . . . . . . . . . . . 252 䡵 Jump-Starting Procedures If Battery Is Low . . . 255 䡵 Driving On Slipp...

HAZARD WARNING FLASHER The hazard flasher switch is located in the center of theinstrument panel below the center air outlets. To engage the Hazard Warning Flashers, depress theswitch on the instrument panel. When the Hazard Warn-ing Switch is activated, all directional turn signals willflash on and...

NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioneris on, turn it off. The air conditioning system adds heat tothe engine cooling system and turning off the A/Cremoves this heat. You can also turn the Temperaturecontrol to maximum heat, the M...

TIREFIT TIRE REPAIR Small punctures, particularly those in the tread, can besealed with TIREFIT. Foreign objects (e.g., screws ornails) should not be removed from the tire. TIREFIT canbe used in outside temperatures down to approximately-4°F (-20°C). The TIREFIT system is located under an access pan...

WARNING! • Do not attempt to repair a tire on the side of the vehicleclose to traffic. Pull far enough off the road to avoid thedanger of being hit when operating the jack or repairinga tire. • Cuts or punctures larger than approximately 0.16 in. (4mm), tire damage caused by driving with extremely l...

5. Unscrew the valve cap from the valve on the deflatedtire. 6. Screw the filler hose (6) from the sealant bottle (5) onthe tire valve. 7. Insert the power plug (2) into the power point on theinstrument panel. 8. Turn the ignition key to the ON/RUN position. 9. Press the switch (3) on the air pump t...

WARNING! • Do not attempt to push or tow your vehicle to get itstarted. Vehicles equipped with an automatic trans-mission cannot be started this way. Unburned fuelcould enter the catalytic converter and once the en-gine has started, ignite and damage the converter andvehicle. If the vehicle has a di...

of the vehicle with the discharged battery. Make sure you have a good contact on the engine ground. Refer tothe following illustration for jump starting connections. 6. Start the engine in the vehicle which has the boosterbattery, let the engine idle a few minutes, then start theengine in the vehicl...

partial or complete loss of vehicle control and stoppingability. To reduce this possibility, the following precau-tions should be observed: 1. Slow down during rainstorms or when roads areslushy. 2. Slow down if road has standing water or puddles. 3. Replace tires when tread wear indicators first be...

CAUTION! • Do not attempt to tow this vehicle from the frontwith sling type towing equipment. Damage to thefront fascia will result. • The only approved method of towing is with a flatbed truck. • Do not tow the vehicle from the rear. Damage tothe rear sheet metal, and fascia will occur. • Do not pu...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine . . . . . . . . . . . . . . . . . . . . . . . . . . 263 䡵 Onboard Diagnostic System — OBD II . . . . . . 264 䡵 Emissions Inspection And MaintenancePrograms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 䡵 Replacement Parts . . . . . . . . ...

6.1L ENGINE 6.1L Engine Compartment MAINTAINING YOUR VEHICLE 263 7

ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboarddiagnostic system called OBD II. This system monitorsthe performance of the emissions, engine, and automatictransmission control systems. When these systems areoperating properly, your vehicle will provide excell...

EMISSIONS INSPECTION AND MAINTENANCEPROGRAMS In some localities, it may be a legal requirement to passan inspection of your vehicle’s emissions control system.Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection andMaintenance) requirement, this check verifies...

WARNING! You can be badly injured working on or around amotor vehicle. Do only that service work for whichyou have the knowledge and the proper equipment.If you have any doubt about your ability to performa service job, take your vehicle to a competentmechanic. MAINTENANCE PROCEDURES The pages that ...

NOTE: Fill engine oil one quart at a time. CAUTION! Overfilling or underfilling will cause oil aeration orloss of oil pressure. This could damage your engine. CAUTION! Operating the engine with the oil levels below thesafe zone, or operating with oil levels that exceed thetop of the safe zone may ca...

To minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignitionwhen the transmission is in gear and the vehicle is inmotion. • Do not try to start engine by pushing or towing thevehicle. • Do not idle the engine with any spark plug wiresdisconnected or removed,...

NOTE: The battery in this vehicle has a vent hose that should not be disconnected and should only be replacedwith a battery of the same type (vented). WARNING! • Battery fluid is a corrosive acid solution and canburn or even blind you. Don’t allow battery fluidto contact your eyes, skin or clothing....

WARNING! • Use only refrigerants and compressor lubricantsapproved by the manufacturer for your air condi-tioning system. Some unapproved refrigerants areflammable and can explode, injuring you. Otherunapproved refrigerants or lubricants can causethe system to fail, requiring costly repairs. Referto...

underhood services, the hood latch, release mechanismand safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice ayear, preferably in the fall and spring. Apply a smallamount of a high quality Mopar 威 Lock Cylinder Lubri- cant or equivalent directly into...

Whenever a change is noticed in the sound of the exhaustsystem, when exhaust fumes can be detected inside thevehicle, or when the underside or rear of the vehicle isdamaged, have a competent mechanic inspect the com-plete exhaust system and adjacent body areas for broken,damaged, deteriorated, or mi...

CAUTION! Mixing of coolants other than specified HOAT en-gine coolants, may result in engine damage and maydecrease corrosion protection. If a non-HOAT cool-ant is introduced into the cooling system in anemergency, it should be replaced with the specifiedcoolant as soon as possible. Do not use plain...

When additional coolant is needed to maintain theproper level, it should be added to the coolant bottle. Donot overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vaporcoming from the front of the engine compartment. This ...

Insure nylon tubing in these areas has not melted orcollapsed. Inspect all hose connections such as clamps and cou-plings to make sure they are secure and no leaks arepresent. NOTE: Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant opera-tions to facilita...

Use only manufacturer’s recommended brake fluid, referto Fluids, Lubricants and Genuine Parts for correct fluidtype. WARNING! • Overfilling the brake fluid reservoir can result inspilling brake fluid on hot engine parts and thebrake fluid catching fire. • Use of a brake fluid that has a lower initia...

Automatic Transmission Fluid Level Check Regular automatic transmission fluid level checks are notrequired. For this reason the dipstick is omitted. If you notice fluid loss or gear shift malfunction, haveyour authorized dealer check the transmission fluid level. CAUTION! Using a transmission fluid ...

Front And Rear Wheel Bearings Front and rear wheel bearings are permanently sealed.No regular maintenance is required for these compo-nents. Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo-graphic location...

• Avoid using abrasive compounds and power buffingthat may diminish the gloss or thin out the paintfinish. CAUTION! Do not use abrasive or strong cleaning materialssuch as steel wool or scouring powder, which willscratch metal and painted surfaces. Special Care • If you drive on salted or dusty road...

Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle aremolded in clear plastic. When cleaning the lenses, caremust be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may beused, but do not use high alcohol conten...

CAUTION! • When installing the Power Distribution Centercover, it is important to ensure the cover is prop-erly positioned and fully latched. Failure to do somay allow water to get into the Power Distribu-tion Center, and possibly result in a electricalsystem failure. • When replacing a blown fuse, ...

Rear Power Distribution Center There is also a power distribution center located in therear compartment under an access panel. This centercontains fuses and relays. CAUTION! • When installing the Power Distribution Centercover, it is important to ensure the cover is prop-erly positioned and fully la...

7. Pull tail lamp assembly clear from vehicle to accessbulbs. Turn bulb sockets counter-clockwise to remove. 8. Pull the appropriate bulb to remove it from the socket. 300 MAINTAINING YOUR VEHICLE

9. Replace the bulb, reinstall the socket, and reattach thetail light assembly. 10. Close the liftgate. License Lamp 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly and pull thebulb from the socket. 3. Replace the bulb and reinstall the bulb and soc...

FLUIDS AND CAPACITIES U.S. Metric Fuel (approximate)6.1 Liter Engines (Premium 91Octane) 19 gal- lons 72 liters Engine Oil-With Filter 6.1 Liter Engines (SAE 0W-40) 7 qts. 6.6 liters Cooling System * 6.1 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Year/ 100,000 Mile Formula) or equivalent. 14.8 qts ...

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance . . . . . . 306 䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . . 306 ▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 309 ▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . . 316 8 M A I N TE N A ...

• Taxi, police, or delivery service (commercial ser-vice). 〫 • Off-road or desert operation. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months,whichever comes first and follow schedule “B” of the ⬙ Maintenance Schedules ⬙ section of this manual. ...

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter, if notreplaced at 3 months. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the air cleaner filter. X Inspe...

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter, if notreplaced at 3 months. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the air cleaner filter. X I...

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (110 000) (115 000) (120 000) Change engine oil and engine oil filter, if notreplaced at 3 months. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the air cleaner filter...

SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter. X X X X X X Inspect the air cleaner filter and replace if re- quired.* X X X X X Replace the a...

Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (110 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter. X X X X X X Inspect the air cleaner filter and replace if required.* X X X X X Replace the air cleaner...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 ▫ Prepare For The Appointment . . . . . . . . . . . . 322 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 322 ▫ Be Reasonable ...

Service Contract You may have purchased a service contract for yourvehicle to help protect you from the high cost of unex-pected repairs after your manufacturer’s new vehiclelimited warranty expires. The manufacturer stands be-hind only the manufacturer’s Service Contracts. If youpurchased a manufac...

Temperature Grades The temperature grades are A (highest), B, and C, repre-senting the tire’s resistance to the generation of heat andits ability to dissipate heat when tested under controlledconditions on a specified indoor laboratory test wheel.Sustained high temperature can cause the material of ...

ABS (Anti-Lock Brake) System . . . . . . . . . . . . . 202Adding Engine Coolant (Antifreeze) . . . . . . . . . 280Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Adding Washer Fluid . . . . . . . . . . . . . . . . . . 98,277Additives, Fuel . . . . . . . . . . . . . . . . . . . . ...

Location . . . . . . . . . . . . . . . . . . . . . . . . . 256,273 Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287Belts, Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . 270Body Mechanism Lubrication . . . . . . . . . . . . . . 276B-Pillar Location . . . . . . . ....

Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Compass Calibration . . . . . . . . . . . . . . . . . . . . 144Compass Variance . . . . . . . . . . . . . . . . . . . . . . 144Computer, Trip/Travel . . . . . . . . . . . . . . . . . . . 143Console . . . . . . . . . . . . . . . . ....

Cooling System . . . . . . . . . . . . . . . . . . . . . . . 279Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 267Power Steering . . . . . . . . . . . . . . . . . . . . . . . 276 Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303Fluids, Lubricants and Genuine Pa...

Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58,92 Airbag . . . . . . . . . . . . . . . . . . . . . . . 40,47,58,136Anti-Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 139Brake Assist Warning ....