Dodge 2004 PL Neon - Manuals

A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the keycode numbers for your vehicle locks. These numbers canbe used to order duplicate keys from your dealer. Askyour dealer for these numbers and keep them in a safeplace. The double sided keysmay be inserted into thelocks with e...

inoperable. The engine can be started and stopped butthe key cannot be removed until you obtain service. WARNING! Leaving children in a vehicle unattended is danger-ous for a number of reasons. A child or others couldbe injured. Children should be warned not to touchthe parking brake, brake pedal or...

SENTRY KEY The Sentry Key Immobilizer System prevents unautho-rized operation of the vehicle by disabling the engine.The system will shut the engine off after 2 seconds ofrunning if an invalid key is used to start the vehicle. Thissystem utilizes ignition keys which have an electronicchip (transpond...

All of the keys provided with your new vehicle havebeen programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Oncea Sentry Key has been programmed to a vehicle, it cannot be programmed to any oth...

Repeat this procedure to program up to a total of 8 keys.If you do not have a programmed sentry key, contactyour dealer for details. General Information The Sentry Key system complies with FCC rules part 15and with RSS-210 of Industry Canada. Operation issubject to the following conditions: • This d...

Automatic Transaxle Ignition Interlock System This system prevents the key from being removed unlessthe shift lever is in PARK and the shift knob push-buttonis fully released. It also prevents shifting out of PARKunless the key is in the ON/RUN or START positions andyou have depressed the brake peda...

WARNING! When leaving the vehicle always remove the keyfrom the ignition lock, and lock your vehicle. Do notleave children unattended in the vehicle, or withaccess to an unlocked vehicle. Unsupervised use ofvehicle equipment may cause severe personal inju-ries and death. Power Door Locks — If Equipp...

4. A single chime will sound to signify that you havesuccessfully disabled the double activation feature. Youcan turn the feature back on by repeating the abovementioned procedure. You can turn the feature back on by repeating the abovementioned procedure. Automatic Door Locks — If Equipped The door...

To use the system, open each rear door and slide thecontrol UP to engage the locks and DOWN to disengagethe child-protection locks. When the system on a door isengaged, that door can only be opened by using theoutside door handle even if the inside door lock is in theunlocked position. WARNING! Avoi...

To Lock the Doors Press and release the LOCK button to lock all doors. Thepark/lamps will flash and the horn will chirp to ac-knowledge the signal. Horn Chirp Feature The horn chirp that signals that the doors have beenlocked can be toggled on or off by using the followingprocedure: 1. Insert the ig...

Programming Additional Transmitters Up to four transmitters can be programmed to yourvehicle. Your new vehicle was shipped with two trans-mitters. See your dealer for additional transmitters. Additional transmitters can be programmed to the sys-tem by using the following procedure: 1. Insert the key...

1. With the transmitter buttons facing down, use a thincoin or similar object to pry the two halves of thetransmitter apart. Make sure not to damage the rubbergasket during removal. 2. Remove and replace the batteries. Avoid touching thenew batteries with your fingers. Skin oils may causebattery det...

3. The indicator light in the instrument cluster will flashrapidly for 16 seconds. This shows that the system isarming. During this period, if a door is opened, theignition switch is turned on, or the power door locks areunlocked in any manner, the system will automaticallydisarm. If the light comes...

INTERNAL EMERGENCY TRUNK LID RELEASE WARNING! Do not allow children to have access to the trunk,either by climbing into the trunk from outside, orthrough the inside of the vehicle. Always close thetrunk lid when your vehicle is unattended. Once inthe trunk, young children may not be able to escape,e...

WARNING! • Wearing a seat belt incorrectly is dangerous. Seatbelts are designed to go around the large bones ofyour body. These are the strongest parts of yourbody and can take the forces of a collision thebest. • Wearing your belt in the wrong place could makeyour injuries in a collision much worse...

WARNING! A frayed or torn belt could rip apart in a collisionand leave you with no protection. Inspect the beltsystem periodically, checking for cuts, frays, or looseparts. Damaged parts must be replaced immediately.Do not disassemble or modify the system. Front seatbelt assemblies must be replaced ...

Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/shoulder belt. 1. Position the latch plate as close as possible to theanchor point. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 2

2. At about 6 to 12 inches above the latch plate, grasp andtwist the belt webbing 180° to create a fold that beginsimmediately above the latch plate. 3. Slide the latch plate upward over the folded webbing.The folded webbing must enter the slot at the top of thelatch plate. 4. Continue to slide the ...

Keep the belt low so that it does not come across theabdomen. That way the strong bones of the hips will takethe force if there is a collision. Seat Belt Extender If a seat belt is too short, even when fully extended andwhen the adjustable upper shoulder belt anchorage (ifequipped) is in its lowest ...

If the vehicle is equipped with side airbags, they arelocated inside the driver and front passenger seats, andtheir covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deploy-ment. WARNING! • Do not put anything on or ar...

Airbags inflate in moderate to high speed impacts. Alongwith the seat belts, front airbags work with the instru-ment panel knee bolsters to provide improved protectionfor the driver and front passenger. Side airbags also workwith seat belts to improve occupant protection. The seat belts are designed...

• The knee impact bolsters help protect the knees andposition you for the best interaction with the frontairbag. If A Deployment OccursThe airbag system is designed to deploy when the AirbagControl Module detects a moderate-to-severe frontalcollision, to help restrain the driver and front passenger,...

WARNING! Deployed airbags can’t protect you in another colli-sion. Have the airbags replaced by an authorizeddealer as soon as possible. Side Airbag System — If Equipped • The Side Impact Airbag Control Modules determine ifa side collision is severe enough to require the airbagto inflate. The Side I...

the rear seat to install the child restraint. You will easilyfeel them if you run your finger along the intersection ofthe surfaces. The lower strap hooks are passed over thetop of each bar, pushing aside the seat cover material. In addition, there are tether strap anchoragesbehind each rear seating...

• The lap portion should be low on the hips and as snugas possible. • Check belt fit periodically. A child’s squirming orslouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move thechild closer to the center of the vehicle. Never allow achild to put the sho...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .51 ▫ Inside Compass/Temperature Mirror—IfEquipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 ▫ Outside...

Lights • Briefly press the “Right” button to toggle the rightreading lamp “ON/OFF”. Repeat the key press tocycle the light • Briefly press the “Left” button to toggle the leftreading lamp “ON/OFF”. Repeat the key press tocycle the light. NOTE: The light can be activated with the ignition off. NOTE: ...

Compass Variance • Find your current location and determine the correctZone number from the map. • Press and hold the “Left” button for 5–10 seconds(until “Zone” appears in the display), then release thebutton. The number displayed is the current Zonevalue. • If a new Zone value is desired, briefly ...

Compass CalibrationIf “CAL” is not displayed, press and hold the “Left”button for 10–15 seconds, or until “CAL” appears in thedisplay, then release the button. The compass is now incalibration mode. The mirror can be calibrated in one of two ways • Drive the vehicle in circles at less then 5mph (8 k...

WARNING! • Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seatcould cause you to lose control. The seat beltmight not be properly adjusted and you could beinjured. Adjust the seat only while the vehicle isparked. • Do not ride with the seatback reclined so that ...

WARNING! • It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision,people riding in these areas are more likely to beseriously injured or killed. • Do not allow people to ride in any area of yourvehicle that is not equipped with seats and seat-belts • Be sure...

LIGHTS Front Map/Reading Lights — If Equipped These lights, located under the rearview mirror, can beturned on by means of switches located at the base of therearview mirror. NOTE: The map lights will remain on when the ignition switch is in the Run or Accessory positions. Interior Lights The interi...

Daytime Running Lights (Canada Only) The front fog lights will come on as Daytime RunningLights whenever the ignition is on, the headlights are off,and the parking brake is off. The headlight switch mustbe used for normal night time driving. Lights-on Reminder If the headlights or parking lights are...

WINDSHIELD WIPERS AND WASHERS The wipers and washers are operated by a switchon the control lever. The lever is located on theright side of the steering column. Move the con- trol lever up to select the desired wiper speed. Windshield Washers To use the washer, pull the control lever toward you andh...

WARNING! Tilting the steering column while the vehicle ismoving is dangerous. Without a stable steering col-umn, you could lose control of the vehicle and havean accident. Adjust the column only while the ve-hicle is stopped. Be sure it is locked before driving. ELECTRONIC SPEED CONTROL — IF EQUIPPE...

WARNING! Leaving the Electronic Speed Control system onwhen not in use is dangerous. You could accidentallyset the system or cause it to go faster than you want.You could lose control and have an accident. Alwaysleave the system OFF when you are not using it. To Set At A Desired Speed: When the vehi...

Manual Transaxle: Depressing the clutch pedal will disengage the speedcontrol. A slight increase in engine RPM before the speedcontrol disengages is normal. Vehicles equipped with manual transaxles may need tobe shifted into a lower gear to climb hills without speedloss. WARNING! Speed Control can b...

POWER SUNROOF — IF EQUIPPED The sunroof control is located on the headliner betweenthe sun visors. A single control “tilts” the sunroof to the vent positionand also slides the sunroof rearward to the full openposition. Move the switch rearward to move the sunroofpanel to the full vent position. The ...

Ash Receiver and Cigar Lighter When the Smoker’s Package is ordered from your autho-rized dealer, an ash receiver tray and a cigar lighterelement are furnished. The lighter element can be in-serted in the auxiliary power outlet. The ash receiver fitssnugly in a cupholder position. To clean the ash r...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS m Instrument Panel Features . . . . . . . . . . . . . . . .74 m Standard Instrument Cluster . . . . . . . . . . . . . . .75 m Optional Instrument Cluster . . . . . . . . . . . . . . .76 m Optional Instrument Cluster — R/T Model . . . .77 m Instrument Clus...

INSTRUMENT PANEL FEATURES 74 UNDERSTANDING YOUR INSTRUMENT PANEL

STANDARD INSTRUMENT CLUSTER UNDERSTANDING YOUR INSTRUMENT PANEL 75 4

OPTIONAL INSTRUMENT CLUSTER 76 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTIONS 1. Front Fog Light Indicator — If Equipped This light shows when the front fog lights areON. 2. Brake System Warning Light This light monitors various brake functions,including brake fluid level and parkingbrake application. If the brake light comeson, it may indicate...

correct mileage that the vehicle has been driven. There-fore, if the odometer reading changes during repair orreplacement, be sure to keep a record of the readingbefore and after the service so the correct mileage can bedetermined. 19. Door Ajar IndicatorThis vacuum fluorescent display indicator ill...

Electrical Disturbances Radio waves may pick up electrical disturbances duringtransmission. They mainly affect the wave amplitude,and thus remain a part of the AM reception. Theyinterfere very little with the frequency variations thatcarry the FM signal. AM Reception AM sound is based on wave amplit...

Music SearchPressing the SEEK button while playing a tape will startthe Music Search mode. Press the SEEK button up for thenext selection on the tape and down to return to thebeginning of the current selection, or return to thebeginning of the previous selection if the tape is withinthe first 5 seco...

You may add a second station to each push-button byrepeating the above procedure with this exception: Pressthe SET button twice and SET 2 will show in the displaywindow. Each button can be set for SET 1 and SET 2 inboth AM and FM. This allows a total of 10 AM and 10 FMstations to be locked into push...

display will show the track number and index time inminutes and seconds. Play will begin at the start of trackone. SeekPress the top of the SEEK button for the next selection onthe CD. Press the bottom of the button to return to thebeginning of the current selection, or return to thebeginning of the...

CD Changer Control Capability — If Equipped This radio is compatible with a remote mounted CDchanger available through Mopar Accessories. The fol-lowing instructions are for the radio controls that operatethis CD changer. Mode ButtonTo activate the CD changer, press the MODE button untilCD informati...

An ERR symbol will appear on the display if the laser isunable to read the Disc data for the following reasons: • Excessive vibration • Disc inserted upside down • Damaged disc • Water condensation on optics Radio Display Messages Your radio has been designed to display certain messageswhen a proble...

• Driving under wide bridges or along tall buildings cancause intermittent reception. • Placing objects over or too close to the antenna cancause signal blockage. CASSETTE TAPE AND PLAYER MAINTENANCE To keep the cassette tapes and player in good condition,take the following precautions: 1. Do not us...

• Pressing the AM/FM button while in the tape or CDmode will select the radio mode. • If in the CD mode and the last CD is ejected, the radiowill tune to the last station selected. Removing Discs from the CD Changer If there is a single CD in the changer, press the EJT buttonand the CD will eject. I...

RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the operation of a cellularphone in your vehicle can cause erratic or noisy perfor-mance from your radio. This condition may be lessenedor eliminated by relocating the cellular phone antenna.This condition is not harmful to the radio. If ...

Bi-Level Air is directed through the panel and floor out-lets. NOTE: There is a difference in temperature between the upper and lower outlets for added comfort. The warmerair goes to the floor outlets. This feature gives improvedcomfort during sunny but cool conditions. Floor Air is directed through...

Outside Air Intake When operating the system during the winter months,make sure the air intake, directly in front of the wind-shield, is free of ice, slush, snow or other obstructionssuch as leaves. Leaves collected in the air-intake plenummay reduce air flow and plug the plenum water drains. The bl...

Mix Air is directed through the floor, defrost and sidewindow demist outlets. This setting works bestin cold or snowy conditions that require extra heat at the windshield. This setting is good for main-taining comfort while reducing moisture on the wind-shield. Defrost Air is directed through the wi...

Circulation Control Use this control to choose be-tween outside air intake orrecirculation of the air insidethe vehicle. Only use the re-circulate mode to temporarilyblock out any outside odors,smoke, or dust and to cool theinterior rapidly upon initialstart up in very hot or humidweather. This cont...

Operating Tips 108 UNDERSTANDING YOUR INSTRUMENT PANEL

Window FoggingVehicle side windows tend to fog on the inside in mildrainy or humid weather. To clear the windows, use theA/C, PANEL and blower controls. Direct the paneloutlets toward the side windows. Do not use recirculatewithout A/C for long periods as fogging may occur. Interior fogging on the w...

ELECTRIC REAR WINDOW DEFROSTER A push-button at the center of the instrumentpanel, below the radio, turns the defroster and the heated mirrors (if equipped) ON or OFF. An amber lightshows that the defroster is on. NOTE: The defroster turns off automatically after 10 minutes of operation. Each follow...

STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . 114 ▫ Automatic Transaxle . . . . . . . . . . . . . . . . . . . 114 ▫ Manual Transaxle . . . . . . . . . . . . . . . . . . . . . 114 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 114 ▫ Start...

STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts. CAUTION! Long periods of engine idling, especially at highengine speeds can cause excessive exhaust tempera-tures which can damage your vehicle. Do not leaveyour veh...

CAUTION! To prevent damage to the starter, do not crank theengine for more than 15 seconds at a time. Wait 10 to15 seconds before trying again. After Starting The idle speed will automatically decrease as the enginewarms up. AUTOMATIC TRANSAXLE — IF EQUIPPED CAUTION! Damage to the transaxle may occu...

NOTE: If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safetyfeature is inoperable. The engine can be started andstopped but the key cannot be removed until you obtainservice. Four Speed Automatic Transaxle The electronically controlled transaxle p...

When frequent transaxle shifting occurs while using theOverdrive range, such as when operating the vehicleunder heavy loading conditions (in hilly terrain, travel-ing into strong head winds, or while towing trailers), usethe “3” range. “3” DriveThis range eliminates shifts into Overdrive. The transa...

Never shift into REVERSE until the vehicle has come to acomplete stop. NOTE: During cold weather, until the transaxle lubri- cant has warmed, you may have difficulty shifting. Thisis normal and not harmful to the transaxle. Recommended Shift Speeds To use your manual transaxle for optimal fuel econo...

If you exceed these speeds, you may notice the engine cutin and out. This is caused by an electronic limiter in theengine computer. The engine will run normally whenyou reduce engine speed. Downshifting Proper downshifting may improve fuel economy andprolong engine life. CAUTION! If you skip more th...

WARNING! • Leaving children in a vehicle unattended is dan-gerous for a number of reasons. A child or otherscould be injured. Children should be warned notto touch the parking brake or the gear selector.Don’t leave the keys in the ignition. A child couldoperate power windows, other controls, or move...

malfunction is caused by an internal leak, as the brakefluid in the master cylinder drops, the brake warningindicator will light. Anti-Lock Brake System (ABS) — If Equipped The ABS gives increased vehicle stability and brakeperformance under most braking conditions. The systemautomatically “pumps” t...

POWER STEERING The power assisted steering system of your vehicleprovides mechanical steering capability in the eventpower assist is lost. If for some reason the hydraulic pressure is interrupted,it will still be possible to steer your vehicle. Under theseconditions you will observe a substantial in...

Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ( ....blank.... ( = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = S...

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load correspondingto its load index under certain operating conditions.—The maximum speed correspon...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tirehowever the date code may only be on one side. Tireswith white sidewalls will have the full TIN includingdate code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black side...

Tire Loading and Tire Pressure Tire Placard Location NOTE: Some vehicles have a “Tire and Loading Infor- mation” placard located on the driver’s side “B” pillar. Tire and Loading Information Placard This placard tells you important information aboutthe,1) number of people that can be carried in the ...

2. Economy—Improper inflation pressures can cause uneven wearpatterns to develop across the tire tread. These abnormalwear patterns will reduce tread life resulting in a need forearlier tire replacement. Underinflation also increases tirerolling resistance and results in higher fuel consumption. 3. ...

WARNING! High speed driving with your vehicle under maxi-mum load is dangerous. The added strain on yourtires could cause them to fail. You could have aserious accident. Don’t drive a vehicle loaded to themaximum capacity at continuous speeds above 75mph (120 km/h). Radial-Ply Tires WARNING! Combini...

Replacement Tires The tires on your new vehicle provide a balance of manycharacteristics. They should be inspected regularly forwear and correct cold tire inflation pressure. The manu-facturer strongly recommends that you use tires equiva-lent to the originals in size, quality and performancewhen re...

CAUTION! Replacing original tires with tires of a different sizemay result in false speedometer and odometer read-ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sidedwear. • Vehicle pull to right or left. Tires ma...

CAUTION! To avoid damage to your vehicle or tires, observe thefollowing precautions: • Because of restricted chain clearance betweentires and other suspension components, it is im-portant that only chains in good condition areused. Broken chains can cause serious damage.Stop the vehicle immediately ...

resulting from the use of such fuels or additives is notthe responsibility of the manufacturer and may not becovered under the New Vehicle Warranty. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessedagainst you. Carbon Monoxide Warnings WARNING! C...

WARNING! • Remove the fuel tank filler tube cap (gas cap)slowly to prevent fuel spray from the filler neckwhich may cause injury. • The volatility of some gasolines may cause a buildup of pressure in the fuel tank that may increasewhile you drive. This pressure can result in aspray of gasoline and/o...

TRAILER TOWING In this section you will find safety tips and informationon limits to the type of towing you can reasonably dowith your vehicle. Before towing a trailer carefully re-view this information to tow your load as efficiently andsafely as possible. To maintain warranty coverage, follow the ...

WHAT TO DO IN EMERGENCIES CONTENTS m Hazard Warning Flasher . . . . . . . . . . . . . . . . . 152 m If Your Engine Overheats . . . . . . . . . . . . . . . . 152 m Jacking And Tire Changing . . . . . . . . . . . . . . . 153 ▫ Preparations For Jacking . . . . . . . . . . . . . . . . 154 ▫ Instructions...

HAZARD WARNING FLASHER The flasher switch is on top of the steering column,just behind the steering wheel. Depress the switch and both cluster indicators and all front and rear direc-tional signals will flash. Depress the switch again to turnHazard Warning Flashers off. Do not use this emergency war...

CAUTION! Driving with a hot cooling system could damageyour vehicle. If temperature gauge reads “H”, pullover and stop the vehicle. Idle the vehicle with theair conditioner turned off until the pointer dropsback into the normal range. If the pointer remains onthe “H”, turn the engine off immediately...

Preparations For Jacking Park the vehicle on a firm level surface, avoid ice orslippery areas, and set the parking brake. Place the gearselector in PARK (automatic transaxle) or REVERSE(manual transaxle). • Turn on the Hazard Warning Flasher. • Block both the front and rear of the wheel diagonally o...

NOTE: The spare tire well is designed to hold the compact spare tire or a deflated (flat) tire. A fully inflatedtire will not fit in the spare tire well. JUMP-STARTING PROCEDURES IF BATTERY ISLOW WARNING! Take care to avoid the radiator cooling fan wheneverthe hood is raised. It can start anytime th...

WARNING! Rapid acceleration on slippery surfaces is danger-ous. Unequal traction can cause sudden pulling ofthe front wheels. You could lose control of thevehicle and possibly have an accident. Accelerateslowly and carefully whenever there is likely to bepoor traction (ice, snow, wet, mud, loose san...

MAINTAINING YOUR VEHICLE CONTENTS m 2.0L Engine Compartment . . . . . . . . . . . . . . . 165 m Onboard Diagnostic System — OBD II . . . . . . 166 m Emissions Inspection And MaintenancePrograms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 m Replacement Parts . . . . . . . . . . . . . ...

2.0L ENGINE COMPARTMENT MAINTAINING YOUR VEHICLE 165 7

ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboarddiagnostic system called OBD II. This system monitorsthe performance of the emissions, engine, and automatictransmission control systems. When these systems areoperating properly, your vehicle will provide excell...

EMISSIONS INSPECTION AND MAINTENANCEPROGRAMS In some localities, it may be a legal requirement to passan inspection of your vehicle’s emissions control system.Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection andMaintenance) requirement, this check verifies...

WARNING! A hot exhaust system can start a fire if you park overmaterials that can burn. Such materials might begrass or leaves coming into contact with your ex-haust system. Do not park or operate your vehicle inareas where your exhaust system can contact any-thing that can burn. In unusual situatio...

WARNING! Battery posts, terminals and related accessories con-tain lead and lead compounds. Wash hands afterhandling. Battery fluid is a corrosive acid solution and canburn or even blind you. Don’t allow battery fluid tocontact your eyes, skin or clothing. Don’t lean over abattery when attaching cla...

a gentle water spray from behind the radiator andthrough the condenser as required. Fabric front fasciaprotectors may reduce air flow to the condenser, reducingair conditioning performance. WARNING! The air conditioning system contains refrigerantunder high pressure. To avoid risk of personal injury...

If necessary, add fluid to restore to the proper indicatedlevel. With a clean cloth, wipe any spilled fluid from allsurfaces. Refer to Recommended Fluids, Lubricants, andGenuine Parts for correct fluid types. Front Suspension Ball Joints There are two front suspension lower ball joints that areperma...

Windshield Wiper Blade Replacement 1. Lift the wiper arm away from the glass. 2. Rotate the blade 45 degrees to gain access to therelease tab. 3. Push the release tab shown in the picture and slide thewiper blade assembly down along the arm. Gently placethe wiper arm on the windshield. 4. Install th...

into the passenger compartment. In addition, inspect theexhaust system each time the vehicle is raised for lubri-cation or oil change. Replace as required. WARNING! Exhaust gases can injure or kill. They contain carbonmonoxide which is colorless and odorless. Breathingit can make you unconscious and...

CAUTION! Mixing of coolants other than specified (non-HOAT), may result in engine damage that may notbe covered under the new vehicle warranty, anddecreased corrosion protection. If a non-HOAT cool-ant is introduced into the cooling system in anemergency, it should be replaced with the specifiedcool...

The cap should be inspected and cleaned if there is anyaccumulation of foreign material on the sealing surfaces. WARNING! The warning words “DO NOT OPEN HOT” on thecooling system pressure cap are a safety precaution.never add coolant when the engine is overheated. Donot loosen or remove the cap to c...

of the engine compartment. This is normally a result ofmoisture from rain, snow, or high humidity accumula-tion on the radiator and being vaporized when thethermostat opens, allowing hot water to enter the radia-tor. If an examination of your engine compartment shows noevidence of radiator or hose l...

Inspect all hose connections such as clamps and cou-plings to make sure they are secure and no leaks arepresent. Components should be replaced immediately if there isany evidence of degradation that could cause failure. Brake System In order to assure brake system performance, all brakesystem compon...

NOTE: Inspection of brake hoses should be done whenever the brake system is serviced and every engineoil change. WARNING! Worn brake hoses can burst and cause brake failure.You could have an accident. If you see any signs ofcracking, scuffing, or worn spots, have the brakehoses replaced immediately....

WARNING! Overfilling the brake fluid reservoir can result inspilling brake fluid on hot engine parts and thebrake fluid catching fire. Use only brake fluid that has been in a tightly closedcontainer to avoid contamination from foreign matter. Do not allow petroleum based fluid to contaminate thebrak...

To check the fluid level properly, the following proceduremust be used: 1. The vehicle must be on level ground. 2. The engine should be running at curb idle speed for atminimum of 60 seconds. 3. Fully apply parking brake. 4. Place the gear selector momentarily in each gearposition ending with the le...

CAUTION! Do not overfill. Dirt and water in the transaxle cancause serious damage. To prevent dirt and waterfrom entering the transaxle after checking or replen-ishing fluid, make certain that the dipstick cap isseated properly. Fluid and Filter ChangesAutomatic transmission fluid and filter should ...

Frequency of Fluid ChangeUnder normal operating conditions, the fluid installed atthe factory will give satisfactory lubrication for the life ofthe vehicle. Fluid changes are not necessary unless thefollowing conditions exist: • The lubricant has become contaminated with water. Ifcontaminated with w...

Interior CareUse Mopar Fabric Cleaner to clean fabric upholstery andcarpeting. Use Mopar Vinyl Cleaner to clean vinyl upholstery. Mopar Vinyl Cleaner is specifically recommended forvinyl trim. Your leather upholstery can be best preserved by regularcleaning with a damp soft cloth. Small particles of...

Front Park/Turn Signal Lights 1. Remove the headlight assembly 2. Twist the bulb socket 1/4 turn and remove. 3. Pull the bulb from the socket and replace. Front Sidemarker Light 1. Remove the screws and push-pins from the frontfender splash shield. 2. Reach between the fender and the splash shield, ...

FLUIDS AND CAPACITIES U.S. Metric Fuel (Approximate)Standard 2.0L Engines 87 Octane 12.5 Gallons 47.5 Liters High Output 2.0L Engines 91 Octane 12.5 Gallons 47.5 Liters Engine Oil-With Filter 2.0 Liter Engines (SAE 5W-30, API Certified Engine Oils) 4.5 qts 4.3 Liters Cooling System * 2.0 Liter Engin...

MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance . . . . . . 204 m Maintenance Schedules . . . . . . . . . . . . . . . . . . 204 ▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 207 ▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . . 215 8 M A I N TE N A ...

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in boldtype must be done at the times or mileages specified to assure the continued proper functioning of the emissioncontrol system. These, and all other maintenance servicesincluded in this manual, should be done to p...

• If equipped for and operating with E-85 (ethanol)fuel. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months,whichever comes first and follow schedule “B” of the 9 Maintenance Schedules 9 section of this manual. NOTE: Most vehicles are operated und...

Schedule “B” Follow schedule “B” if you usually operate your vehicleunder one or more of the following conditions. Change the automatic transmission fluid and filter every60,000 miles (96 000 km) if the vehicle is usually operatedunder one or more of the conditions marked with an L . Change the manu...

Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (14 000) (19 000) (24 000) Change engine oil and engine oil filter. X X X X X Inspect the front brake pads and rear brake liningsand rotors. X Inspect and replace, if required, the make-up airfilter (located inside the air cleaner)....

Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers ) (29 000) (34 000) (38 000) (43 000) (48 000) Change engine oil and engine oil filter. X X X X X Inspect the front brake pads and rear brake liningsand rotors. X X Replace air cleaner element (filter). X Check and replace, if necessary, the PCV v...

Miles 42,000 48,000 54,000 60,000 66,000 (Kilometers) (67 000) (77 000) (86 000) (96 000) (106 000) [Months] [42] [48] [54] [60] [66] Change engine oil and engine oil filter. X X X X X Inspect the brake linings. X Replace the engine air cleaner filter. X Replace the spark plugs and ignition cables. ...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 ▫ Prepare For The Appointment . . . . . . . . . . . . 220 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 220 ▫ Be Reasonable ...

Service ContractYou may have purchased a service contract for yourvehicle to help protect you from the high cost of unex-pected repairs after your manufacturer’s new vehiclelimited warranty expires. The manufacturer stands be-hind only the manufacturer’s Service Contracts. If youpurchased a manufact...

MOPAR T PARTS Mopar t fluids, lubricants, parts, and accessories are available from your dealer. They will help you keep yourvehicle operating at its best. REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If youbelieve that your vehicle has a defect which could causea crash or c...

PUBLICATION ORDER FORMS To order the following manuals, you may use either thewebsite or the phone numbers listed below. Visa, Mas-tercard, American Express, and Discover orders are ac-cepted. If you prefer mailing your payment, please callfor an order form. NOTE: A street address is required when o...

Temperature Grades The temperature grades are A (highest), B, and C, repre-senting the tire’s resistance to the generation of heat andits ability to dissipate heat when tested under controlledconditions on a specified indoor laboratory test wheel.Sustained high temperature can cause the material of ...

ABS (Anti-Lock Brake) System . . . . . . . . . . . . . 124Adding Engine Coolant (Antifreeze) . . . . . . . . . 182Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Air Cleaner, Engine . . . . . . . . . . . . . . . . . . . . . 175Air Conditioning . . . . . . . . . . . . . . . . . . ...

Jack Operation . . . . . . . . . . . . . . . . . . . . . . . . . 153Jacking Instructions . . . . . . . . . . . . . . . . . . . . . 154Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 157 Key, Programming . . . . . . . . . . . . . . . . . . . . . . . 12Key Release Button . . . . . . . ...

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Identification Logo . . . . . . . . . . . . . . . . . . . . 171Materials Added to . . . . . . . . . . . . . . . . . . . . 172Quality . . . . . . . . . . . . . . ....

Windows Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Windshield Washer Aiming . . . . . . . . . . . . . . . 179Windshield Washers . . . . . . . . . . . . . . . . . . . . . 63 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Windshield Wiper Blades . . . ....