Dixon DCG 114883 - Manuals

6 Assembly Instructions Front Weight Bar Tools Required Ratchet with 3 / 8 " Socket 3 / 8 " Wrench Mounting Instructions • Using the weight keepers, attach front weight barto mower at the front caster arms. • Secure front weight bar to mower frame with four 3 / 8 " x 1¼" hex bolts, f...

7 STRAP LANYARD SUPPORTBRACKET ASSEMBLY Collection System Tools Required RatchetTorque Wrench½" Wrench½" Socket 9 / 16 " Wrench 9 / 16 " Socket 5 / 8 " Socket 1. Open the mounting kit box and remove all of thecomponents. 2. Place the support bracket on the frame andsecure with (2...

8 Handle Assembly 1. Attach backing plate and tube support to hopperusing holes shown in illustration. 2. Connect handle to tube support using pivot pin. ASSEMBLY BACKING PLATEHOLES BACKINGPLATE TO HOPPERUNIT TUBESUPPORT STOP PIVOT PIN THREADED TUBE HANDLE ADJUSTMENTNUT ROD END ADJUSTMENTNUT ROD END...

9 ASSEMBLY Hopper Door Adjustment Adjust door rods on both sides with adjusting nut sodoor closes evenly. See illustration. DOORRODS ADJUSTMENT NUTS HOPPER HOPPER DOOR Blower Kit Install Blower Kit per the instructions shipped with theblower unit. (114992 for the 52" or 130195 for the 60".) ...

10 Preventative Maintenance Schedule Item Before Every Every Every Each Use 5 Hours 25 Hours 50 Hours Inspect/Clean Poly Mesh X X Check/Tighten Nuts & Bolts X Check/Tighten Hoses X Turn Hose End to End X Rotate Hose X Clean Machine X SERVICE AND MAINTENANCE WARNING The collection system hopper m...

11 PROBLEM POSSIBLE CAUSE CORRECTION Loss of Vacuum. Blower, hose or hood inlet clogged. Remove hose and clean inlet. Hopper full. Inspect and empty. Fan blades bent or broken. Replace/repair impeller. Poly mesh plugged. Clean poly mesh. Unusual vibration Solid object jammed in unit. Check and remov...

12 1 ...... 1 .... 113754 ....... WELDMENT - HOPPER2 ...... 8 .... 104808 ....... PILLOW BLOCK3 ...... 1 .... 113747 ....... WELDMENT - DOOR4 ...... 1 .... 113755 ....... PLATE - BACKING5 ...... 1 .... 113748 ....... TUBE - SUPPORT, HANDLE6 ...... 1 .... 113746 ....... WELDMENT - BELL CRANK7 ...... ...

13 DRIVE KIT ASSEMBLY 1 .... 1 ... 111199 ...... HITCH BRKT WELDMENT, LT2 .... 1 ... 111201 ...... HITCH BRKT WELDMENT, RT3 .... 1 ... 20255 ........ FRONT WEIGHT BAR4 .... 1 ... 111313 ...... HOLD DOWN, WEIGHT BAR5 .... 2 ... 102049 ...... CLEVIS PIN6 .... 2 ... 108096 ...... SPRING RETAINER7 .... ...

14 1 ... 539 111172 .... 1 .. HOOD2 ... 539 111175 .... 2 .. SUPPORT, DRAW LATCH3 ... 539 111182 .... 1 .. INLET TUBE4 ... 539 111183 .... 1 .. MESH, POLY DIAMOND5 ... 539 102587 .... 6 .. GROMMET, BUMPER6 ... 539 105408 .. 2 1 .. WASHER, #10 HOOD ASSEMBLY ITEM P/N QTY. DESCRIPTION ITEM P/N QTY. DES...