Directed Electronics 580 - Manuals

9 © 2008 Directed Electronics. All rights reserved. What’s included One five-button/2-way Supercode Responder LE remote control • One five-button/ 1-way Supercode remote • The control module (installed out-of-sight) • Control center with integrated status LED and Valet override switch • A remote sta...

10 © 2008 Directed Electronics. All rights reserved. Responder LE 2-way remote 8 12345 6 7 6 7 9 8 12345 Feature Description 1 Lock button Press for one second to lock. 2 Unlock button Press for one second to unlock. 3 Remote start button Press for one second to activate remote start. 4 Auxiliary bu...

11 © 2008 Directed Electronics. All rights reserved. 1-way companion remote 8 12345 6 7 6 7 9 8 12345 Note: See call-out table for 2-way ➤ Transmitter configuration Button Level Direct Access A U X x 1 A U X x 2 A U X x 3 A U X x 4 A U X Lock Silent Lock A U X Unlock Silent Unlock Valet Mode Car Fin...

14 © 2008 Directed Electronics. All rights reserved. Valet mode Command : Press A U X two-times and then A U X . Feedback : Remote beeps 1 to 2 times when entering Valet mode. Notes : To enter or exit Valet mode, even if Locked. When entering Valet Mode the remote beeps one-time. When exiting Valet ...

15 © 2008 Directed Electronics. All rights reserved. Aux 3 Command : Press A U X three times and then press A U X . Feedback : The AUX LED turns on for 3-secs, AUX activation tone sounds. Notes : This is an optional feature. See your sales rep/installer for details. Runtime check Command : Press A U...

16 © 2008 Directed Electronics. All rights reserved. ➤ Out of range notification If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the remote will respond with an out-of range notification. If this occurs, the transmit indicator on the ...

17 © 2008 Directed Electronics. All rights reserved. ➤ Remote control progamming The Reponder LE 2-way remote control has menus for programming the remote to the system control module and for configuring the remote control user features. Before you start make sure the keypad is unlocked. (See page 1...

19 © 2008 Directed Electronics. All rights reserved. Note: If a remote button is not pressed for more than 72 hours, the remote au- tomatically goes into sleep mode to extend battery life. It wakes up and resets each time a button is pressed. ➤ Multi-car control capability You can use the Responder ...

20 © 2008 Directed Electronics. All rights reserved. ➤ Locking the vehicle To lock the vehicle, press the button on the remote control. The horn in the vehicle “honks” one-time, and the parking lights flash one-time. If the power door locks have been connected, the doors lock. The system automatical...

21 © 2008 Directed Electronics. All rights reserved. ➤ Overriding the optional starter kill To bypass the optional starter kill without a remote control: Use your override switch located on the control center (see diagram below) to bypass the system. This switch bypasses the system only if you have ...

22 © 2008 Directed Electronics. All rights reserved. Using the remote start Read this user guide, including the warnings on page 6, before using the remote start. Ensure that the vehicle is parked in an open area, not in a garage. To use your remote start to pre-warm or pre-cool your vehicle, rememb...

24 © 2008 Directed Electronics. All rights reserved. ➤ Manual transmission vehicles If the vehicle has manual transmission the proper steps must be followed before leaving the parked vehicle, or the remote start feature is disabled. This process is called MTS, manual transmission start. While the ve...

25 © 2008 Directed Electronics. All rights reserved. ➤ Timer mode This unit can be programmed to start and run the engine every three hours, for a maximum of six cycles. The engine will run for the programmed run time and then shut down. After three hours, the system will restart the engine. Importa...

26 © 2008 Directed Electronics. All rights reserved. To exit timer mode without the transmitter: Make sure the remote start system is not operating the engine. 1. Turn the ignition on. Timer Mode is exited and the parking lights flash 2. slowly four times. Note: The Bitwriter can change the amount o...

27 © 2008 Directed Electronics. All rights reserved. To enter turbo timer mode with a manual transmission: Perform the manual transmission procedure with the door open. Transmit the timer mode feature with the remote by pressing two-times, and then press A U X . After exiting the vehicle, lock the s...

29 © 2008 Directed Electronics. All rights reserved. ➤ Cabin temperature Using the Responder LE you have the ability to check the temperature inside the vehicle. Press the button one-time and Hold it until the remote beeps, and then re- lease. The LEDs light up indicating the temperature range of th...

31 © 2008 Directed Electronics. All rights reserved. Safety features This system has several important safety features to ensure proper operation of the motor and prevent accidental damage to the engine or its components. ➤ Optional starter anti-grind circuitry Whenever the vehicle is remote started...

32 © 2008 Directed Electronics. All rights reserved. Diagnostics The micorprocessor at the heart of the system is constantly monitoring the switch- es that are connected to the main unit. ➤ Locking If the system is locked at the same time that the door input is active, you will hear one horn honk to...

33 © 2008 Directed Electronics. All rights reserved. ➤ Remote start This system can provide you with information to indicate what the problem is when using the remote start. When the remote start is activated and fails to engage, count the parking light flashes to determine the problem. The parking ...

34 © 2008 Directed Electronics. All rights reserved. Owner recognition Owner recognition lets up to four users of the system have unique settings to meet their specific needs. It is almost like having four separate systems in your vehicle, one for each user. This feature is only available to authori...

35 © 2008 Directed Electronics. All rights reserved. ➤ 2-way remote Your Responder LE 2way remote control has a feature called remote power save mode. When programmed On under remote options, the remote conserves power by disabling the paging function if unused for more than 72 hours. Pressing any b...

36 © 2008 Directed Electronics. All rights reserved. Convenience expansions Listed below are some of the expansion optins available. Please consult your dealer for a complete explanation of all the options avaiable to you. Power Trunk Release: The accessory output of the system can operate a factory...

37 © 2008 Directed Electronics. All rights reserved. Glossary of terms 2-Way Remote: A hand-held, remote control which operates the various func- tions of your system and receives feedback and pages from the system. Control Center: The control center contains the system’s radio-frequency an- tenna, ...

39 © 2008 Directed Electronics. All rights reserved. Quick reference guide Locking • To lock press The lock LED flashes and the remote beeps one-time. If horn honk is installed, the remote emits a honk sound. Unlocking • To unlock press 1 3456 2 A U X . The unlock LED flashes for one-second, and the...

41 © 2008 Directed Electronics. All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereafter the “unit”), excluding withou...

G4202P 2008-05 Vista, CA 92081 www.directed.com © 2008 Directed Electronics—All rights reserved The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and acce...