Dimplex PEMBERLEY - Manuals

Opti-myst wall engine Model: OMWFC20 - RTOPW20 - PEM20 IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE General. Unpack the heater carefully and retain the packaging for possible future use, in the event of moving or returning the fire to your supplier. The fi...

4. Disconnect the electrical connector, located on the right side of the sump. (See Fig.6) . 5. Release the right sump locking tabs by turning 90º, this allows the sump to be lifted completely from its location. (See Fig.6a) 6. Gently lift up the sump, taking care to keep level so as not to spill an...

Troubleshooting Symptom Cause Corrective Action The flame effect will not start. Mains plug is not plugged in. Low water level. Low voltage connector not connected properly. (See Fig.6) The Transducer Unit is not sitting correctly in the sump Check plug is connected to wall socket correctly. Check t...