Dimplex PEMBERLEY - User Manual
Dimplex PEMBERLEY Heater – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Opti-myst wall engine; relevant ISO standard; Electrical connection.
- Page 5 – Remote Control Operation
- Page 6 – Troubleshooting; Symptom
- Page 12 – Opti-myst is a trade mark of GDC Group Ltd.; A division of GDC Group Ltd,
OPTIMYST WALL ENGINE
OMWFC20
RTOPW20
PEM20
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
08/51462/0 Issue 5
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Opti-myst wall engine Model: OMWFC20 - RTOPW20 - PEM20 IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE General. Unpack the heater carefully and retain the packaging for possible future use, in the event of moving or returning the fire to your supplier. The fi...
4. Disconnect the electrical connector, located on the right side of the sump. (See Fig.6) . 5. Release the right sump locking tabs by turning 90º, this allows the sump to be lifted completely from its location. (See Fig.6a) 6. Gently lift up the sump, taking care to keep level so as not to spill an...
Troubleshooting Symptom Cause Corrective Action The flame effect will not start. Mains plug is not plugged in. Low water level. Low voltage connector not connected properly. (See Fig.6) The Transducer Unit is not sitting correctly in the sump Check plug is connected to wall socket correctly. Check t...
