Dimplex ECR15 - Manuals - manualsarea.com

Page 2 - IMPORTANT; Do not use this heater if it has been dropped.

IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Note also the information presented on the appliance CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefully...

Page 3 - DO NOT COVER

leaving the room on their own, unless constant supervision is provided. • To reduce the risk of fire, keep textiles, curtains and or flammable material a minimum distance of 1 m from the air outlet. • This heater carries the warning symbol indicating that it must not be covered. • WARNING: To avoid ...

Page 5 - Specifications

Model no. ECR15 ECR15FA ECR15TIF ECR24 ECR24FA ECR24TIF Power supply 230-240V~, 50Hz Rated power 1500W 2400W Heat settings 3 3 3 3 3 3 Thermostat Y Y Y Y Y Y Timer N N Y N N Y Turbo Fan N Y Y N Y Y Weight (net) 8.1 kg 7.1 kg 7.2 kg 11.8 kg 10.7 kg 10.8 kg Dimensions (w x d x h) 415x280x635mm 320x280...

Page 6 - Fitting The Castors; WARNING

Fitting The Castors A B WARNING The radiator must only be operated with the wheels and castors fitted and in an upright position. The castors must be fitted to the underside of the control panel and on the bracket between the last and second last fin on the opposite end, as shown in Fig.1 . 1. To fi...

Page 7 - Positioning; suitable for domestic use and similar indoor locations.; Safety Features; Tilt Switch

Positioning Select the position for the heater ensuring there is clearance from any furniture and fittings of at least 300mm above the heater and 150mm each side and 300mm from the control and end panel. We recommend maximising the clearance where possible. NOTE: The radiator is designed for operati...

Page 8 - Operation; IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE PLACED ON THIS HEATER.

Thermostat Off/Heat selection switch Neon Indicator Timer Cable Wrap Turbo Turbo Switch Operation IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE PLACED ON THIS HEATER. Before using the heater ensure that all warnings and instructions have been read carefully. To activate the heater simply plug it in. N...

Page 9 - Thermostat

Operation Thermostat The Thermostat, see Fig.2 controls the heat output according to the room temperature. This ensures that the heater will not produce heat unnecessarily when the room is warm. 1. To set the temperature you require, turn the thermostat knob clockwise until the required setting is r...

Page 10 - Timer model; Setting the time of day

Timer model ELECTROMECHANICAL TIMER (Ti models) Setting the time of day To set the time of day, rotate the timer dial clockwise (indicated by the arrow) until the correct time of day is opposite the reference mark - see Fig.4 . The 24-hour clock is used; e.g. time shown for 4pm is '16' (16:00hrs). O...

Page 11 - Turbo fan; The turbo can be turned on independently of the heat.

Setting the 'Auto' ON and OFF times To set the timer: 1. Using your fingertip or tip off a pencil, push in as many segments as necessary around the dial, according to the times you don't require heat - see Fig.5 . Each segment pushed in switches the heater OFF for that part of the hour All other seg...

Page 12 - Storage; Cleaning

Over time, dust can accumulate on the heater which can effect performance. It is recommended to clean the unit at least once a month. 1. Turn the unit OFF and disconnect the appliance from the power supply.2. Remove any dust build up with a soft brush.3. Wipe the surface of the unit with a soft damp...

Page 13 - Maintenance; Warranty; Glen Dimplex Australia Pty Ltd

If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). Maintenance Recycling: Do not dispose of electrical appliances...