Digi MIL-190C - Manuals

Digi MIL-190C – Manual in PDF format online.

Manuals:

Manual Digi MIL-190C

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - cabling for CISPR 22 class B installation.); D i a g n o s t i c L E D s a n d C o n d i t i o n s I n d i c a t e d

Install Guide Model: MIL-190 2 I n t r o d u c t i o n The MIL-190C supports Fast Ethernet in both half- and full-duplex mode. For network budget constraint, the MIL-190C uses 150 nanoseconds (approximately 30 meters of cable) during conversion in each direction. To maximize the fiber cable distance...

Page 3 - Install Guide; C o n fi g u r a t i o n; Turn off power “before” attempting to configure the device.; Locate and remove the four phillips screws located on the side.; Figure 1.JP1 Configuration Options; R J - 4 5 P i n o u t s; negotiation enabled; M D I

Install Guide Model: MIL-190 3 C o n fi g u r a t i o n The MIL-190 is configured to support auto-negotiation between half- and full-duplex modes. Jumper JP1 is configured with pins 2-3 “jumpered,” which allows auto-negotiation between these two modes. However, if you are connecting to a device that...

Page 4 - L e g a l; R e g u l a t o r y A p p r o v a l s; C a n a d i a n E M I N o t i c e; Address: 1299 Orleans Drive; Five-Year Limited Warranty

Doc #: 90000072 Rev. A L e g a l R e g u l a t o r y A p p r o v a l s • FCC Class A • UL 1950 • CSA 22 No. 950 • EN60950 • CE – EN55022 Class B– EN50082-1 C a n a d i a n E M I N o t i c e This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regul...

Digi Manuals