Dewalt DWS780 XE - Manuals

7 not indicate exactly 22.5°, turn the crown adjustment screw contacting the pawl with a 10 mm (7/16") wrench until the bevel pointer indicates exactly 22.5°. FENCE ADJUSTMENT (FIG. 1) The upper par t of the fence can be adjusted to provide clearance, allowing the saw to bevel to a full 49° both...

99 3. When the saw comes up to speed, lower the arm smoothly and slowly to cut through the wood. Let the blade come to a full stop before raising arm. SLIDING CROSSCUT When cutting anything larger than a 51 x 150 mm (2" x 6" [51 x 105 mm (2" x 4") at 45º mitre]) workpiece, use an out...

12 12 WARNING: Ensure the saw is mounted firmly to a stable flat sur face. Failure to do so could cause the saw to be unstable and fall causing personal injury. 4. Place the workpiece to be cut on top of the platform mounted to the table. Ensure the workpiece is firmly against the back of the base f...

13 10 10 10 20 20 20 30 30 30 40 40 40 50 50 50 60 60 60 70 70 70 80 80 80 TABLE 1: COMPOUND MITER CUT (POSITION WOOD WITH BROAD FLAT SIDE ON THE TABLE AND THE NARROW EDGE AGAINST THE FENCE) SET THIS MITER ANGLE ON SAW ANGLE OF SIDE OF BOX (ANGLE A) SQU ARE BOX 6-SIDED BOX MITER DEGREE SET TING BEVE...