Dewalt DCS371P1 - Manuals

7 English • Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Take it to an authorized service center. • Do not disassemble the charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result...

8 English LEAVING THE BATTERY PACK IN THE CHARGER The charger and battery pack can be left connected with the charge indicator showing Pack Charged. WEAK BATTERY PACKS: Weak batteries will continue to function but should not be expected to perform as much work. FAULTY BATTERY PACKS: This charger wil...

9 English the motor OFF. Releasing the trigger switch also automatically actuates lock-off button. WARNING: This tool has no provision to lock the switch in the ON position, and should never be locked ON by any other means. LED Worklight (Fig. 2) There is a worklight (S) located above the blade The ...

10 English The following table is intended as a general guide only. Determine the type of material and dimension of the workpiece and select the most appropriate band saw blade. NOTICE: Never use the band saw to cut resin materials which are subject to melting. Melting of resin material caused by hi...

11 English 3. Use a 3 mm hex wrench (E) to turn one of the tracking screws (O) 1/4 turn clockwise. Turn the other tracking screw 1/4 turn clockwise. NOTE: Turning the tracking screw clockwise moves the blade toward the guide roller, turning the tracking screw counterclockwise moves the blade away fr...

12 English FUEL GAUGE BATTERY PACKS (FIG. 2) Some D E WALT battery packs include a fuel gauge which consists of three green LED lights that indicate the level of charge remaining in the battery pack. To actuate the fuel gauge, press and hold the fuel gauge button (R). A combination of the three gree...

13 English FIG 6 FIG. 7 F Installing the Brush, Brush Cap and Blade Guards (Fig. 8) WARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause inju...

14 English OPERATION WARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. Cutting Refer to Figure 10 for recommended cutting position...

15 English 7. Whenever possible, hold the saw fi rmly in both hands. If the optional blade guards (Fig. 8) are installed, the saw can be operated with one hand. Keep your free hand clear of the blade area and do not allow the saw to fall against the clamped or supported material or your body when the...

16 English Cleaning WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye protection when performing this. WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic p...

17 English 2 YEARS FREE SERVICE ON D E WALT BATTERY PACKS DC9071, DC9091, DC9096, DC9280, DC9360, DC9180, DCB120, DCB127, DCB201, DCB203 and DCB207. 3 YEARS FREE SERVICE ON D E WALT BATTERY PACKS DCB200, DCB204, DCB205 D E WALT BATTERY PACKS Product warranty voided if the battery pack is tampered wi...

Snap Lock Pipe & Elbows FITTINGS, ELBOWS & PIPE FITTINGS, ELBOWS & PIPE • Elgen’s Snap Lock Pipe is used for low pressure applications• Reeves Lock and Button Lock come standard on every piece• Manufactured from 26 GA ASTM A-653 & ASTM A-924 G60 material. 60” length • Optional Constr...

Press On Collars FITTINGS, ELBOWS & PIPE FITTINGS, ELBOWS & PIPE • Made From a Single Piece of 24 GA Metal • Stitch welded Seam for Added Strength & Low Leakage • Used for Low & Medium Pressure Applications • Meets SMACNA Requirements - 2005 3rd Edition Section 4.8 Figure 4-6 • Optio...

Conicals FITTINGS, ELBOWS & PIPE FITTINGS, ELBOWS & PIPE • Elgen’s Conical is used for Low Pressure Applications • Stitch welded Seam for Added Strength & Low Leakage • Body is made with one piece of metal • Meets SMACNA Requirements - 2005 3rd Edition Section 4.8 Figure 4-6 • Optional C...

High Efficiency Take Offs FITTINGS, ELBOWS & PIPE FITTINGS, ELBOWS & PIPE • Elgen’s HETO (High Efficiency Take Off) without damper is used for low & medium pressure applications • Welded Seam for Added Strength • Meets SMACNA Requirements - 2005 3rd Edition Section 4.8 Figure 4-6 • Optio...

Bellmouths FITTINGS, ELBOWS & PIPE FITTINGS, ELBOWS & PIPE Bellmouth Collar W/D Item # Description Dimension A (in) Dimension B (in) Dimension C (in) Dimension D (in) SF0360 BELLMOUTH COLLAR W/D 4" 4" 7" 6" 2.75" SF0370 BELLMOUTH COLLAR W/D 5" 5" 8" 6" 2.7...

FITTINGS, ELBOWS & PIPE Saddle Taps FITTINGS, ELBOWS & PIPE • Elgen’s Round Saddle is used for Low & Medium Pressure applications on round pipe • Optional Construction Available • MADE IN THE USA Press on Saddle Tap A (in) B (in) C (in) D (in) 4" 6” 6” 3” 5” 7” 6” 3” 6" 8” 6” 3” ...

Cable Operated Fittings FITTINGS, ELBOWS & PIPE FITTINGS, ELBOWS & PIPE • Elgen’s Cable operated Heto’s are a Convenient way to maintain airflow adjustment after installation. Airflow can be easily adjusted by pushing or pulling on the cable to alter the damper blade position. All Volume Dam...

Elgen Flange DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS • Designed to provide external duct reinforcement and to provide a joining system between two similar size joints of duct • Butyl in pocket for an energy efficient seal • Sealing Materials meet NFPA 90A & B Class 1 requ...

J Flange DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS • Designed to provide external duct reinforcement and to provide a joining system between two similar size joints of duct. Butyl in pocket for an energy efficient seal • Sealing Materials meet NFPA 90A & B Class 1 requireme...

H Flange & Gaskets DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS Item # Description Box QTY ST0005 SC-41 1/8 X 1/2 NEOPRENE GASKET 5,400FT ST0050 SC-41 5/16 X 3/4 X 34' NEOPRENE 680FT ST0087 SC-41 1/4 X 1/2 X 34' BLK MED DEN NEOPRENE GASKET 1,632FT ST0090 SC-41 1/4 X 3/4 X 34' ...

C & F Corners DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS • Corner pieces are used to add rigidty to the flange, hold duct work together and provide a sealing surface for the gasket. Add rigidty to the Transverse Duct Flange. Provides a sealing surface for the Elgen 440 Butyl...

C & F Corners DUCT CONNECTORS & COMPONENTS Item # Description Box QTY EG0491 C-W CORNER 300/BOX EG0492 C-W CORNER ST/ST#304 300/BOX EG0492A C-W CORNER *ALUM* 300/BOX DUCT CONNECTORS AND COMPONENTS Item # Description Box QTY EG0064 C CORNER ** WITH TEETH** 300/BOX EG00645 F CORNER ** WITH TEE...

C & F Cleats DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS • Elgen’s E-55 Cleat is compatible on all flange systems except for H. The E-55 Cleat is used on the perimeter of the Flange, four bolt rectangular system. It provides uniform compression for the 440 Butyl Gasket betwee...

Flexible Duct Connector DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS • Elgen’s Notch Lock elminates duct system noises and vibrations. It attaches to a fan source on one side and ductwork on the other • All Elgen fabrics are designed to meet NFPA-701 (formerly UL-214) • Tested in ...

Flexible Duct Connector DUCT CONNECTORS & COMPONENTS DUCT CONNECTORS AND COMPONENTS • Elgen’s Residential 1-3/4”x3”x1-3/4” duct connector eliminates duct system noises and vibrations. This is done with an airtight flexible connection consisting of a fabric that attaches to sheet metal on both si...

Slip & Drive DUCT CONNECTORS & COMPONENTS Item # Description Bundle QTY EG0952 DRIVE MATERIAL 1"*26GA* X10FT -BLUE- 100FT EG09505 DRIVE MATERIAL 1"24GA. X10FT -ORANGE 100FT EG0906 DRIVE MATERIAL 1" 22GA X10FT -GREEN- 100FT EG0955 DRIVE MATERIAL 1" **ALUM** X10FT 100FT EG0951A...

Duct Protection Film DUCT PROTECTION FILM • Elgen’s Shrink Wrap with PSA is used on any exposed sections of the duct work • It prevents outside debris from entering the ductwork and contaminating the duct work • No Need to tape • No Loose ends flapping • Does not leave any residue • No VOC’s - Meets...

Turning Vane & Hardware VANE & RAIL Item # Description Bundle Qty VR0160 ACCOUSTICAL VANE #ACC-14 4" X10FT 50FT VR0165 ACCOUSTICAL VANE 4" ST#304 X10FT 50FT VR0170 ACCOUSTICAL VANE 4" ST#316 X10FT 50FT VR0175 ACCOUSTICAL VANE 4" ALUMINUM X10FT 50FT Item # Description Bundle Q...

Rail VANE & RAIL RAIL • Elgen’s Double Wall Vane Rail is used in conjunction with Elgen’s Double Wall Vane • Used for securing and aligning Vane to direct airflow through rectangular elbows • Conforms to SMACNA Spacing requirements • Refer to 2005 SMACNA Figure 4-3 • MADE IN USA 2” & 4” Doub...

Strut HANGING SYSTEMS & REINFORCEMENTS HANGING SYSTEMS & REINFORCEMENTS • Elgen Strut Channel is used primarily as a trapeze hanger for commercial construction • Meets SMACNA table 5-4 in the 2005 3rd Edition for load requirements • Meets MFMA-4 • Optional Construction Avaialable • MADE IN U...

90 Degree Brackets Item # Description Box QTY # of Holes A Dimension B Dimension C Dimension EG08388 90DEG ANGLE BRACKET - 4-HOLE 50/BOX 4 9/16" 3-1/2" 4-1/8" EG08389 90DEG ANGLE BRACKET - 3-HOLE 25/BOX 3 9/16" 1-5/8" 4-1/8" Strut Accessories HANGING SYSTEMS & REINFORCEME...

Grippers & Wire HANGING SYSTEMS & REINFORCEMENTS HANGING SYSTEMS & REINFORCEMENTS • Elgen’s Two Way Gripper is a steel cable hanging system, intended to add a simpler way of suspending ductwork • ASTM E8 & A370 Approved • Complies with SMACNA upper and lower attachment standards if u...

Anchors HANGING SYSTEMS & REINFORCEMENTS HANGING SYSTEMS & REINFORCEMENTS • Double Expansion Anchors fix machine bolts in materials of indeterminate strength • They can be used in poured concrete or concrete block, as well as brick and stone based materials Double Expansion Anchor • Drop in ...

Precision Adhesives Duct-Solv-0 SEALANTS & ADHESIVES SEALANTS & ADHESIVES • Premium Grade UL listed duct sealant with zero reportable VOC • Forms an air-tight and water-tight seal • Flexes with expansion and contraction of the sheet metal • Bonds well to aluminum, galvanized, or stainless st...

SEALANTS & ADHESIVES Sealants & Adhesives SEALANTS & ADHESIVES • Precision’s water based liner adhesive is an economical, water based product for bonding insulation to metal surfaces • This adhesive can be sprayed, brushed, or rolled • Designed for both manual and automatic applications ...

• AE-40 is an unusually fast penetrant that can be used to loosen frozen threads or parts that have rusted together • Acts to penetrate, lubricate, prevent rust and corrosion • Protects bare metal against rust and corrosion up to 6 months AE-40 • California Compliant • Formulated for rapid applicati...

Spiral Elbows SPIRAL CONNECTORS, FITTINGS & COMPONENTS SPIRAL CONNECTORS, FITTINGS & COMPONENTS • Elgen’s spiral elbow features quick and easy installation due to a “fitting size” 3” straight in and straight out along with a raised bead for coupling with spiral pipe • Compared to stamped elb...

Spiral Rings & Couplings SPIRAL CONNECTORS, FITTINGS & COMPONENTS SPIRAL CONNECTORS, FITTINGS & COMPONENTS • Elgen’s Spiral Flange is a product for joining sections of spiral pipe • Can be installed in shop or on site • Durable hemmed edge prevents damage • Available in welded and split ...

Tab & Press On Doors ACCESS DOORS ACCESS DOORS • Elgen’s access door with hinge and cam lock frame is used to access the inside of rectangular ductwork • Meets 2005 SMACNA Standards for pressure class & gauges. • Optional Construction Available • MADE IN USA Type “A” Access door with Hinge &...

Round & Ductboard Doors ACCESS DOORS Item # Description AD1238 8X4 DOOR FOR FLAT** AD1115 12X8 DOOR FOR FLAT** AD1238A 16X12 DOOR FOR FLAT** AD1218 8X4 DOOR FOR 4" ROUND AD1220 8X4 DOOR FOR 6" ROUND AD1235 8X4 DOOR FOR 8" ROUND AD1236 8X4 DOOR FOR 10" ROUND AD1237 8X4 DOOR FOR 12...

Casing, Flush Mount & Window Doors ACCESS DOORS ACCESS DOORS • Elgen’s access door with full window is used to access the inside of rectangular ductwork • See Through Panel is made of 2 layers of 3/16” thick plexiglass, sealed with silicone • Meets 2005 SMACNA Standards for pressure class & ...

Access Door Gasket & Hardware ACCESS DOORS ACCESS DOORS #20 Amerloc Latch #20L Amerloc Latch • Elgen’s High Temp Fiberglass Gasket is used for high temp applications in or around boilers, ovens, and most commonly used for welded black iron grease exhaust • Type E Glass knitted and coated with a ...

Duct Liner INSULATION & COMPONENTS INSULATION & COMPONENTS • Duct Liner absorbs noise within sheet metal ducts, and contributes to indoor comfort by lowering heat loss or gain through duct walls • Qualifies for LEED Credit • GREENGUARD CERTIFIED • Absorbs fan and A/C turbulence noise and red...

INSULATION & COMPONENTS Insulation Components Item # Description Bucket QTY WP0010 1/2" SUPERPOINT WELD PINS 6,000 WP0020 3/4" SUPERPOINT WELD PINS 5,000 WP0040 1" SUPERPOINT WELD PINS 4,000 WP0050 1-1/8" SUPERPOINT WELD PINS 4,000 WP0060 1-1/4" SUPERPOINT WELD PINS 4,000 WP0...

Tape INSULATION & COMPONENTS Item # Description Box QTY TA0120 3"x50 YDS - ALUM FOIL TAPE (ARTIC WEATHER APPROVED) 16/BOX TA0277 FASSON 0800 - 2.5" 2 MIL FOIL TAPE UL 181A-P/B-FX 16/BOX TA0278 FASSON 0817 - 2" 2 MIL FOIL TAPE 24/BOX TA0279 FASSON 0817 - 3" 2 MIL FOIL TAPE 16/BOX ...

Duct Wrap & Rubber Liner INSULATION & COMPONENTS INSULATION & COMPONENTS • Absorbs noise and reduces popping noises caused by expansion, contraction, and vibration • Assured thermal R-Value performance • Bacterial and fungal growth resistand with an EPA registered biocide that helps prot...

Duct Wrap & Board INSULATION & COMPONENTS INSULATION & COMPONENTS • Outstanding thermal and acoustical performance • Economical, cost effective alternative to round double-wall configuration air ducts • Bacterial and fungal growth resistant with an EPA registered biocide that protects th...

Flex & Components FLEX DUCT & COMPONENTS Item # Description FL0180 070 FLEX VINYL INSUL.4" (25FT/CARTON) FL0190 070 FLEX VINYL INSUL. 6" (25FT/CARTON) FL0195 070 FLEX VINYL INSUL.7" (25FT/CARTON) FL0200 070 FLEX VINYL INSUL. 8" (25FT/CARTON) FL0210 070 FLEX VINYL INSUL. 10...

FASTENERS & HARDWARE COMPONENTS Screws & Magnetic Chucks FASTENERS & HARDWARE COMPONENTS • Elgen’s Self Drilling Screw is designed for fastening to aluminum and steel with a drill point tip Self Drill Tek Screw Item # Description Box QTY TK0415-M 8X1/2" TEK ELGEN 1,000/BOX TK0420-M 8...

Rivets FASTENERS & HARDWARE COMPONENTS FASTENERS & HARDWARE COMPONENTS Rivets Item # Description Box QTY RV0195-M SS56 STEEL RIVET 1,000/BOX RV0200-M SS58 STEEL RIVET 1,000/BOX RV0210-M SS62 STEEL RIVET 1,000/BOX RV0215-M SS64 STEEL RIVET 1,000/BOX RV0010-M AA42 ALUM.RIVET 1,000/BOX RV0016-M...

Nuts & Bolts FASTENERS & HARDWARE COMPONENTS FASTENERS & HARDWARE COMPONENTS Hex Head Tap Bolts Item # Description Box QTY TB0003-C 1/4 X 1/2"TAP BOLT 100/BOX TB0005-C 1/4 X 3/4"TAP BOLT 100/BOX TB0010-C 1/4 X 1"TAP BOLT 100/BOX TB0015-C 1/4 X 1-1/4"TAP BOLT 100/BOX TB002...

FASTENERS & HARDWARE COMPONENTS Washers FASTENERS & HARDWARE COMPONENTS Flat Washers Item # Description Box QTY WA0005 1/4" FLAT WASHER **BULK** (1 LB = 149 PCS) 50LBS WA0005-C 1/4" FLAT WASHER (Approx 0.64lbs) 100/BOX WA0035-C 1/4" FLAT WASHER ST/ST#304 100/BOX WA0010 3/8" F...

Damper Blades DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES • Elgen’s Damper Blades are desigend for controlling airflow inside smoke fittings and round ductwork • Corrosion resistant • Pre-assembled with E-702 and E-708 for easy use • Optional Construction Avaialble • MADE IN USA Heavy ...

End Bearings DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Item # Description Box QTY GE1031 RP-6 SPRING END BEARING 100/BOX GE1007 RP-6XL SPRING END BEARING 100/BOX GE1007ST RP-6XL **ST/ST SPECIAL 100/BOX GE1032-C RP-7 SPRING END BEARING 100/BOX GE1008 RP-7XL LONG SPRING BEARING 100/BOX...

Bearing Strap & Damper Clips DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Bearing Straps Item # Description Box QTY GD1071-C DA BEARING STRAP 100/BOX GD1072-C DA-AL ALUM BEARING STRAP 100/BOX GD1074-C DA-SS STST BEARING STRAP 100/BOX Bearing Straps w/Set Screw Item # Description Box...

DAMPER HARDWARE & BLADES Regulator Sets DAMPER HARDWARE & BLADES Item # Description Box QTY GH1014 E-69 REGULATOR SET 144/BOX GH1015 E-70 REGULATOR SET 144/BOX GH1016 E-71 REGULATOR SET 144/BOX GH1016A E-71 REGULATOR SET **ALUMINUM** MTO Item # Description Box QTY GE1022 RP-2X 1/4" SQ DI...

Quadrants DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Item # Description Box QTY GE1016K EDR-3 SQ REGULATOR SET of RP-3, RP-7, RP-9 100/BOX GE1043 EDR-3XL REGULATOR SET GIVE RP-3, RP-7XL, RP-9XL 100/BOX GE1043ST EDR-3XL ST/ST** 100/BOX GE1043ST-10 EDR-3XL ST/ST** 10/BOX Item # Descript...

Quadrants DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Item # Description Box QTY GE1025 RP-5 SQ QUADRANT 100/BOX Item # Description Box QTY GE1027 RP-5C DIECAST QUADRANT 50/BOX Item # Description Box QTY GE1029 RP-5CR RD DIECAST QUADRANT 100/BOX GE1002-10 RP-5CR-SS ST/ST QUADRANT (WITH...

Speedy Damper Regulator DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Item # Description Box QTY GE1052-C TB-1 (THREADED BEARING) 100/BOX GE1100-C TB-1XL FULLY THREADED 100/BOX Item # Description Box QTY GE1030 RP-1 SPEEDY HANDLE 100/BOX Item # Description Box QTY GE1050 BW-1 WASHER 100/...

Brackets DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Item # Description Box QTY GD1050 MHB LARGE BRACKET WITH 7/32" HOLE 200/BOX GD1051 MHB-AL LARGE ALUM BRACKET 200/BOX GD1052 MHB-SS LARGE STST BRACKET 200/BOX Item # Description Box QTY GD1127 ALB MEDIUM BRACKET 250/BOX GD1073-C A...

Pivots, Bearing Pin & Lollipop DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Item # Description Box QTY GD1056-C PV 1/4" "BRASS PIVOT 100/BOX GD2003-C PV-5/16"" PIVOT BRASS 100/BOX Item # Description Box QTY GD1128 LOLLIPOP ZAMAC MTO Item # Description Box QTY GD1082 ...

Air Control Damper Hardware DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES PVC-1 Connector for Twin Link Pivot Item # Description Box QTY GD1501-C PVC-1 CONNECTOR STUD 100/BOX Twin Link Brackets Item # Description Box QTY GP1400 TLB-1 TWIN-LINK BRACKET 100/BOX GP1400-10 TLB-1 TWIN-LINK BR...

Air Control Damper Hardware DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Oppo-Line Brackets Item # Description Box QTY GD1037 OL-1 OpposedBld BRACKET MTO GD1063 OL-1AL ALUM OpposedBlade Brkt MTO GD1062 OL-1SS STST OpposedBlade Brkt MTO Oppon-Line Damper Accessory Set Item # Description ...

Air Control Damper Hardware DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES Splitter Damper Brackets Item # Description Box QTY GD1136 SPL-10 SPLITTER DAMPER BRACKET 100/BOX GD1139 SPL-10AL ALUM Splitter Bracket MTO GD1138 SPL-10SS STST Splitter Bracket MTO Swivel Splitter Damper Bracket I...

Seals DAMPER HARDWARE & BLADES DAMPER HARDWARE & BLADES ESS-12 Side Seal Item # Description Box QTY GM1410 ESS-12 SIDE SL 1.5" (.0065) 6,000FT GM1410-4920 ESS-12 SIDE SL 1.5" (.0065) 4,920FT GM1413 ESS-12-5.75" CENTERS ST/ST SIDE SEAL 6,000FT GM1413-58 ESS-12-5.75" CENTERS ST...

Conduit & Stud Inserts SHOP PRODUCTS & COMPONENTS SHOP PRODUCTS & COMPONENTS Conduit Inserts Item # Description Box QTY EG0970 EZ-CONDUIT LOCKS 1/2" 1000/BOX EG0970-C EZ-CONDUIT LOCKS 1/2" 100/BOX EG0975 EZ-CONDUIT LOCKS 3/4" 1000/BOX EG0975-C EZ-CONDUIT LOCKS 3/4" 100/BO...

Laser Labels SHOP PRODUCTS & COMPONENTS • Solid White • Colors with Full Bleed • White w/Color Stripe • Permanent • Removable • 6 labels to a sheet • 1,000 sheets per box Labels SHOP PRODUCTS & COMPONENTS Part # Description Part # Description LB0001 WHITE SOLID PERMANENT (1M/BOX) LB1185 PINK...

SAFETY, TOOL & ACCESSORIES KN95 Protect yourself and others with a mask that was designed to be effective for limiting the spread of Covid-19. KN95 Now Available KN95 SAFETY, TOOL & ACCESSORIES 70

Lifts SAFETY, TOOL & ACCESSORIES SAFETY, TOOL & ACCESSORIES Genie Lifts Item # Description LF0166 SLC-12 GENIE LIFT LF0155 SLC-18 GENIE LIFT LF0160 SLC-24 GENIE LIFT LF0167 GENIE FORK EXTENSION #33366-S LF0148 33984GT GENIE FORKS LF0148P 48301 TOGGLE.PIN FOR FORK #SLC LF0168 GENIE RETAIN.PIN...

Lifts SAFETY, TOOL & ACCESSORIES SAFETY, TOOL & ACCESSORIES Vermette Lifts Item # Description LF0026 520 VERMETTE LIFT LF0045 L7-HE VERMETTE PLATFORM (2/BOX) LF0060 L-1 VERMETTE TONGUE LF0070 L-2-2 VERMETTE POST(1/BOX) LF0075 L-2-3 VERMETTE POST(1/BOX) LF0080 L-2-4 VERMETTE POST(1/BOX) LF008...

Hand Tools SAFETY, TOOL & ACCESSORIES SAFETY, TOOL & ACCESSORIES Hand Tools Item # Description HT0851 CLEAT TOOL *ELGEN* STRAIGHT (EACH) HT0852 CLEAT TOOL *ELGEN* HEX HANDLE (EACH) HT08525 CLEAT TOOL *ELGEN* HEX HANDLE SUPER THICK (EACH) • Elgen’s Cleat tool improves installation of cleats t...

Power Tools SAFETY, TOOL & ACCESSORIES SAFETY, TOOL & ACCESSORIES Power Tools • 5.0 amp pistol grip, variable speed, 2500 RPM motor • Replaceable A-2 tool steel shear blades • Cuts C.R. mild steel 14-18GA • Cuts at over 170 inches per minute Item # Description PT0242 KD440# KETT SHEAR 14 GA....

Tool Accessories SAFETY, TOOL & ACCESSORIES SAFETY, TOOL & ACCESSORIES Tool Accessories Item # Description Box QTY MA0005 1/4" DRILL BIT *SDS* X4" 12/BOX MA0006 1/4" DRILL BIT SDS SPECIAL X6" 12/BOX MA0025 3/8" DRILL BIT *SDS* X6" 12/BOX MA0040 1/2" DRILL BIT *SDS...