Denon DN-F400- Manuals

iv • DECLARATION OF CONFORMITY ( English ) We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60950-1, EN55022, EN55024, EN61000-3-2 and EN61000-3-3. Following the provisions of 2006/95/EC and 2004/108/EC Di...

1 ■ ACCESSORIES Check first that the following accessories are included in the box: q Stereo Audio Cable ............................................................................................................ 1 w AC adaptor ..........................................................................

2 FEATURES ■ Standard function • Playback of music files recorded on an SD card/SDHC card (see page 8)• Supporting WAV, MP3 (MPEG-1 Layer III ) • Displaying the ID3 tags of MP3 (See page 9)• Headphones output with trim (see pages 2 and 6)• Analog audio output with trim (balanced/unbalanced) (See pag...

5 1. GENERAL INFORMATION RC-F400S Rear panel DC IN 5V DC IN 5V POWER POWER RS232C RS232C OFF OFF ON ON z x c v z POWER ON/OFF switch • Slide the knob to turn the power on or off. x RS-232C serial connector • Connect the DN-F400 using the RS-232C straight cable supplied with the RC-F400S. (See pages ...

6 INSTALLATION ■ Attaching the mounting brackets for a 19-inch 1U half-sized rack • The DN-F400 is half the size of 1U. Attach the included rack mounting brackets to the DN- F400. Then it can be mounted in an EIA 19-inch rack. • The RC-F400S is of desktop type only. 1. Remove two screws on the side ...

7 2. PREPARATIONS ■ Connecting the DN-F400 and RC- F400S • Use the RS-232C straight cable supplied with the RC-F400S. • After connecting, fix the connector by turning the screws on the connector. ■ Connecting an audio device • Connect an audio device to the analog audio output jacks using the analog...

8 FILE FORMAT FOR PLAYBACK ■ PCM file format Format Sampling frequency Quantization Bit number Channel File extension PCM 44.1kHz 16bit Stereo wav Mono 48kHz Stereo Mono ■ MP3 file format Format Sampling frequency Quantization Bit number Channel Bit rate (kbps) File extension MP3 44.1kHz 16bit Stere...

9 3. DEVICE OPERATION ■ DN-F400 display information When an SD card is inserted in the DN-F400, setting information, time information, and text information are displayed on the display unit of the DN-F400. Setting information 00:45 PGMR P T \ MUSIC \ Honey.MP3 Text information Time information ■ Tim...

10 3. DEVICE OPERATION NORMAL PLAYBACK Before starting playback Before turning the power on, set the MODE switch on the rear panel of the DN-F400 according to the intended use. (See page 11) 1. Set the POWER ON/OFF switch of each device to ON after connecting the DN-F400 and RC-F400S. 1 DN-F400 1 PO...

11 3. DEVICE OPERATION • When the button is held pressed for more than 1 second, playback is in FF or FR of 2 times speed. (with audio output) • When the button is held pressed for more than 4 seconds, playback is in FF or FR of 10 times speed. (with audio output) • When the button is held pressed f...

12 3. DEVICE OPERATION Advanced playback using the RC-F400S ■ Main mode When the RC-F400S is turned on, the main mode is displayed on the display unit. TIME NOT PLAY FILE LIST HOT LIST Fordidden Par TITLE FILE INFORMATION White Label R ALBUM 256KB SIZE STEREO CHANNEL MP3 256kbps 44.1KHz FORMAT 2-Tra...

13 3. DEVICE OPERATION 1. Select a folder with the 4 / ¢ jog wheel, and press it. Then the files in the folder are displayed. 2. Press the 4 / ¢ jog wheel to determine the file selection then press the 6 button to start playback. 2. Programmed playback • For a file with the extension “m3u”(playlist ...

14 3. DEVICE OPERATION ■ Hot-start setting 0123456789012345678901234567abcdefg.MP3 abcdefg.MP3 Honey01.MP3 abcdefg05.MP3 FILE LIST 003 abcdefg00.MP3 004 abcdefg01.MP3 005 abcdefg02.MP3 006 abcdefg03.MP3 007 abcdefg04.MP3 --- 009 002 001 EXIT LOAD NOT PLAY \ MPGLANG \ Plaese select HOTSTART button. 1...

15 4. CONTROL FEATURES RS232C CONTROL Connect the RS-232C straight cable to the RS-232C serial port (D-sub 9-pin). Then the unit can be controlled from external host equipment.• The DN-F400 automatically transmits status data when status is changed.• The DN-F400 will respond to status requests by tr...

16 4.CONTROL FEATURES Table of Control command codes Code Command @ 0TRnnn+CR Track Jump   nnn @ 02311+CR DISPLAY @ 02332+CR Track Jump ¢ @ 02333+CR Track Jump 4 @ 02348+CR PAUSE @ 02350+CR RWD : ON @ 0235001+CR RWD : OFF @ 02352+CR FF : ON @ 0235201+CR FF : OFF @ 02353+CR PLAY @ 02354+CR STOP @ 0HP...

17 4.CONTROL FEATURES Table of Status Request and Status information codes When a Status Request Command from the host is received by the DN-F400, the DN-F400 sends the Status Information to the host. When the DN-F400 changes status, the DN-F400 automatically sends Status Information to the host. Mo...

19 4.CONTROL FEATURES PARALLEL CONTROL Connections The settings of Pins No. 16 to 20 can be changed with switch No. 6 PARALLEL of the MODE switch on the rear panel of the DN-F400. (See page 11) Pin No. Signal Name I/O 1 Hot Start 1 I 2 Hot Start 2 I 3 Hot Start 3 I 4 Hot Start 4 I 5 Hot Start 5 I 6 ...

20 Make sure of the followings before you consider as any malfunctions : 1. Are all the connections correct? 2. Are all system components being operated correctly in accordance with the operating instructions? 3. Are the speakers and amplifier/receiver functioning correctly? If the Unit still does n...

D & M Holdings Inc. Printed in China 09/2009 541110370022P mzh-d