Delta 23-592 - Manuals

5 ASSEMBLY TOOL RESTS 1. Assemble adjustable tool rest (A) Fig. 3, to left side of tool rest arm (B), as shown, and fasten with one 5/16-18x3/4" hex head screw (C) and 5/16" lockwasher (D).Assemble the remaining tool rest to the right side of theother tool rest arm in the same manner. Do not...

6 2. Align the holes in the eye shield with the holes in the spark guard and place the eye shield spacer (A) Fig. 7, inthe space in the spark guard as shown. 3. Insert the eye shield bolt (A) Fig. 8, through the hole in the eye shield (B), eye shield spacer (C), and sparkguard (D). 4. Place an 1/4&#...

7 EXTENSION CORDS Use proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong grounding type plug and a 3-holereceptacle which will accept the tool’s plug. When usingan extension cord, be sure to use one heavy enough tocarry the cur...

8 STARTING ANDSTOPPING GRINDER The switch (A) Fig. 14, is located on the front of thegrinder. To turn the grinder “ON” push the left hand portion of the switch and to turn the grinder “OFF” push the right hand portion of the switch. DRESSING AGRINDING WHEEL When dressing a grinding wheel use a suita...

9 Delta Building Trades and Home Shop Machinery Two Year Limited Warranty Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory whichin normal use has proven to be defective in workmanship or material, provided that the customer returns...