Dell VA-40FC- Manuals

Page 2 - NOTE; DANGER

2 Fixed Rack Mount Kit Installation Procedure 53-1001792-01 Notes, Cautions, and Warnings NOTE A NOTE indicates important information that helps you make better use of your computer. CAUTIONSee the safety and regulatory information that shipped with your system. For additional regulatory information...

Page 3 - In this guide; The supported switches are listed in; Installation requirements; TABLE 1; Supported switches; Switch Height

Fixed Rack Mount Kit Installation Procedure 3 53-1001792-01 In this guide • Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • Installation requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 4 - Tool requirements and parts list; ATTENTION; Table 2; TABLE 2; Parts list; Item

4 Fixed Rack Mount Kit Installation Procedure 53-1001792-01 • Ensure that an electrical branch circuit with the following characteristics is available: - Required voltage and frequency as indicated in the hardware reference manual. (200-230 VAC is always preferred) - Protection by a circuit breaker ...

Page 5 - FIGURE 1; Items in Fixed Rack Mount Kit; Installation procedure; Complete these tasks to install the switch in a cabinet:

Fixed Rack Mount Kit Installation Procedure 5 53-1001792-01 FIGURE 1 Items in Fixed Rack Mount Kit Installation procedure ATTENTION The switch must be turned off and disconnected from the fabric during this procedure. NOTE Although this document describes how to install a 1U, 1.5U, and 2U switch, th...

Page 6 - Attaching front brackets; Figure 2; FIGURE 2; Position the front bracket; Installing the switch in the cabinet; Complete the following steps to install the switch in the cabinet.

6 Fixed Rack Mount Kit Installation Procedure 53-1001792-01 Attaching front brackets Complete the following steps to attach the front brackets to the switch. 1. Position the right front bracket (Item 1) with the flat side against the right side of the switch ( Figure 2 ). 2. Insert two 8-32 x 5/16 i...

Page 7 - Position the switch in the cabinet; Attaching rear brackets to front brackets; Figure 4

Fixed Rack Mount Kit Installation Procedure 7 53-1001792-01 NOTE The figure above is shown with a recessed mounting configuration on the left and a flush mounting configuration on the right. You can select either mounting option. FIGURE 3 Position the switch in the cabinet Attaching rear brackets to...

Page 8 - FIGURE 4; Position the rear and front brackets; Attaching rear brackets to cabinet rails; Figure 5

8 Fixed Rack Mount Kit Installation Procedure 53-1001792-01 FIGURE 4 Position the rear and front brackets Attaching rear brackets to cabinet rails Complete the following steps to attach the rear brackets to the cabinet rails. 1. Attach the right rear bracket (Item 4) to the right rear cabinet rail u...

Page 9 - FIGURE 5; Attach the rear bracket to the cabinet rail

Fixed Rack Mount Kit Installation Procedure 9 53-1001792-01 FIGURE 5 Attach the rear bracket to the cabinet rail 1 Bracket, front right 7 Screw, 10-32 x 5/8 in., panhead Phillips 4 Bracket, rear right 8 Retainer nut, 10-32 RIGHT #2 -00 024 02-02 RE V. B FO XC ON N 01 /03 /2005 1 4 7 8