Dell UP3214Q- Manuals

About Your Monitor  7 • On-Screen Display (OSD) adjustments for ease of set-up and screen optimization. • Software and documentation media includes an information file (INF), Image color Matching File (ICM), Dell Display Manager software application and product documentation. Dell Display Manager i...

8  About Your Monitor Back View 1 2 3 4 5 6 7 Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA Cover) Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm). 2 Regulatory label Lists the regulatory approval...

About Your Monitor  9 Side View Card Reader Slot Bottom View 1 2 3 4 5 6 7 7 Label Description Use 1 AC power connector To connect the monitor power cable. 2 DisplayPort in connector Connect your computer with DP cable. 3 Mini DisplayPort in connector Connect your computer with Mini DP to DP cable....

10  About Your Monitor Monitor Specifications Flat panel Specifications Screen type Active matrix - TFT LCD Panel type In Plane Switching Viewable image dimensionsDiagonalHorizontalVertical 80.1 cm (31.5-inches viewable image size)697.9 mm (27.5 inches)392.6 mm (15.5 inches) Pixel pitch 0.182 mm Vi...

About Your Monitor  11 640 x 480 37.5 75.0 31.5 -/- 800 x 600 37.9 60.0 40.0 +/+ 800 x 600 46.9 75.0 49.5 +/+ 1024 x 768 48.4 60.0 65.0 -/- 1024 x 768 60.0 75.0 78.8 +/+ 1152 x 864 67.5 75.0 108.0 +/+ 1280 x 800 49.3 60.0 71.0 +/+ 1280 x 1024 64.0 60.0 108.0 +/+ 1280 x 1024 80.0 75.0 135.0 +/+ 1600...

12  About Your Monitor Signal cable type DisplayPort to Mini DisplayPort 1.8 M cable.USB 3.0 1.8 M cable. Dimensions (with stand) Height (extended) 572.4 mm (22.5 inches) Height (compressed) 482.6 mm (19.0 inches) Width 749.9 mm (29.5 inches) Depth 214.0 mm (8.4 inches) Dimensions (without stand) H...

About Your Monitor  13 Operating 5,000 m (16,400 ft) max Non-operating 12,191 m (40,000 ft) max Thermal dissipation 580.21 BTU/hour (maximum)341.30 BTU/hour (typical) Power Management Modes If you have VESA’s DPM™ compliance display card or software installed in your PC, the monitor can automatical...

14  About Your Monitor Pin AssignmentsDisplayPort Connector (DP in and DP out) Pin Number 20-pin Side of the monitor connector Pin Number 20-pin Side of the monitor connector 1 ML0(p) 11 GND 2 GND 12 ML3(n) 3 ML0(n) 13 GND 4 ML1(p) 14 GND 5 GND 15 AUX(p) 6 ML1(n) 16 GND 7 ML2(p) 17 AUX(n) 8 GND 18 ...

About Your Monitor  15 9 ML2(n) 19 GND 10 ML0(p) 20 +3.3 V DP_PWR 19-pin HDMI Connector Pin Number 19-pin Side of the monitor connector Pin Number 19-pin Side of the monitor connector 1 TMDS DATA 2+ 11 TMDS CLOCK SHIELD 2 TMDS DATA 2 SHIELD 12 TMDS CLOCK- 3 TMDS DATA 2- 13 Floating 4 TMDS DATA 1+ 1...

16  About Your Monitor USB Upstream Connector Pin Number Signal Name 1 VBUS 2 D- 3 D+ 4 GND 5 StdB_SSTX- 6 StdB_SSTX+ 7 GND_DRAIN 8 StdB_SSRX- 9 StdB_SSRX+ Shell Shield USB Downstream Connector Pin Number Signal Name 1 VBUS 2 D- 3 D+ 4 GND 5 StdA_SSRX- 6 StdA_SSRX+ 7 GND_DRAIN 8 StdA_SSTX- 9 StdA_S...

About Your Monitor  17 Card Reader Specifications Overview • The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card. • The Flash Memory Card Reader is automatically recognized by Microsoft® Windows® Vista, Windows® 7 Servic...

18  About Your Monitor Maximum Card Capacity Supported by the UP3214Q card reader Card type Support Specification Support Maximum Capacity by Spec. UP3214Q MS Pro HG Memory Stick Pro-HG Support USB 3.0 speed 32 GB Supported MS Duo Memory Stick Duo Specification 32 GB Supported SD SD Memory Card sup...

About Your Monitor  19 Maintenance Guidelines Cleaning Your Monitor WARNING: Read and follow the Safety Instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list ...

20  Setting Up the Monitor Setting Up the Monitor Attaching the Stand NOTE: The stand is detached from the monitor when it is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set u...

Setting Up the Monitor  21 Connecting the black DisplayPort (or miniDP) cable DP or Connecting the black HDMI Cable (Optional) HDMI Connecting the USB 3.0 cable After you have completed connecting the DP/mini DP/HDMI cable, follow the procedure below to connect the USB 3.0 cable to the computer and...

22  Setting Up the Monitor USB CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable managem...

Setting Up the Monitor  23 Removing the Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup ...

Operating the Monitor  25 Operating the Monitor Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as t...

36  Operating the Monitor DisplayPort 1.2 Press the button to enable or disable DisplayPort 1.2. To use the HBR2 feature, enable DP1.2 to get 3840 x 2160, 60 Hz. See Setting Up the DP1.2 Display for more information. NOTE: Ensure that your Graphics Card can support these features before selecting D...

Operating the Monitor  37 PBP submenu when PBP On Dell UP3214Q Brightness/Contrast Input Source Resolution: 3840x2160, 30Hz Color Settings PBP Mode Size DisplayPort Display Settings PBP Settings Energy Settings Menu Settings Other Settings Personalize Energy Use Fill Resolution: - PBP submenu when ...

38  Operating the Monitor Energy Settings Dell UP3214Q Brightness/Contrast Input Source Resolution: 3840x2160, 30Hz Color Settings USB Off During Standby On During Active On Power Button LED Monitor sleep Reset Energy Settings Display Settings PBP Settings Energy Settings Menu Settings Other Settin...

Operating the Monitor  41 LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting Enable . Dell UP3214Q Brightness/Contrast Input Source Resolution: 3840x2160, 30Hz Colo...

42  Operating the Monitor OSD Warning Messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? Dell UP3214...

44  Operating the Monitor Dell UP3214Q No HDMI Cable The display will go into Power Save Mode in 5 minutes. www.dell.com/support/monitors See Troubleshooting for more information. Setting the Maximum Resolution In Windows Vista®, Windows® 7 Service Pack (SP1) or Windows® 8/ Windows® 8.1:1. For Wind...

Operating the Monitor  45 Setting Up the DP1.2 Display The default out of factory setting in the UP3214Q is DP1.1a. To enable 3840 x 2160 at 60 Hz, ensure the graphics card of the DP source is DP1.2 certified with MST feature, capable of supporting resolution up to 3840 x 2160 at 60 Hz, and its dri...

46  Operating the Monitor Dell UP3214Q DP MST/HBR2 will be disabled for DP1.1a. Confirm Exit B) Monitor fails to show any content (blank screen) 1. Press OSD button to invoke the Input Source OSD menu. Preset Modes Brightness/Contrast Input Source Menu Exit 2. Use the the or button to highlight Dis...

Operating the Monitor  47 3. Press and hold the button for approximately 8 sec. 4. The DisplayPort configuration message will appear: DisplayPort 1.2? Dell UP3214Q Enable Disable 5. Use the button to enable DP1.2 or button to exit without making any changes. Repeat the above steps to change the set...

48  Operating the Monitor Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. 4° typical (maximum 5.5°) 21° typical (maximum 22°) 30° 30° 90 mm N...

Troubleshooting  49 Troubleshooting CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions . Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly ...

50  Troubleshooting Dell UP3214Q No HDMI Cable The display will go into Power Save Mode in 5 minutes. www.dell.com/support/monitors 4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. 5. Turn Off your monitor and reconnect the video cable; th...

52  Troubleshooting Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms What You Experience Possible Solutions No Video/Power LED Off No picture • Ensure that the video cable connecting the mo...

Troubleshooting  55 Product Specific Problems Specific Symptoms What You Experience Possible Solutions Screen image is too small Image is centered on screen, but does not fill entire viewing area • Check the Aspect Ratio setting in Display Settings OSD • Reset the monitor to Factory Settings . Cann...

56  Troubleshooting Troubleshooting the Card Reader CAUTION: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media. Problem Cause Solution Drive letter is not assigned. (Windows® XP only) Conflict with network drive letter. • – Right-cl...

58  Appendix Appendix WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Informatio...

Setting Up Your Monitor Display  59 Setting Up Your Monitor Display Setting the display resolution to 3840 x 2160 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 3840 x 2160 pixels by performing the following steps: In Win...

62  Setting Up Your Monitor Display Procedures for setting up dual monitors in Windows Vista®, Windows® 7 or Windows® 8/Windows® 8.1 Content (a) For Windows Vista® (b) For Windows® 7 (c) For Windows® 8/Windows® 8.1 (d) Setting Display Styles For Multiple Monitor (a) For Windows Vista® Connect the e...

64  Setting Up Your Monitor Display (b) For Windows® 7 Connect the external monitor(s) to your laptop or desktop using a video cable (DP, HDMI etc.) and follow any of the below setup method. Method 1: Using keyboard shortcut “Win+P”1. Press the Windows logo key + P on your keyboard. 2. While holdin...

Setting Up Your Monitor Display  69 (d) Setting Display Styles For Multiple Monitor After the external monitor(s) have been set up, users can select the desired display style from Multiple displays menu: Duplicate, Extend, Show Desktop On. NOTE: Please optimize the size of the icons and fonts on mu...