Dell SP2008WFPF- Manuals

Page 2 - About Your Monitor; DellTM SP2008WFP Flat Panel Monitor; Front View

Back to Contents Page About Your Monitor Dell™ SP2008WFP Flat Panel Monitor Front View Back View Bottom View Side View Monitor Specifications Cleaning Your Monitor Front View Back View 1. Video input select 2. OSD menu / select button 3. Brightness & Contrast / Down (-) but...

Page 4 - Monitor Specifications; Power Management Modes; Pin Assignments

Monitor Specifications Power Management Modes If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. The monitor automatically resumes functioning when the com...

Page 6 - Webcam - MIC System Requirements

l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) pro...

Page 7 - Electrical

Available USB 1.1 port or a USB 1.1 hub with external power supply (USB 2.0 required for maximum frame rate and resolution) CD-ROM/DVD-ROM drive for software installation Monitor Resolution Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 76 Hz (automatic) Optimal pres...

Page 8 - Cleaning Your Monitor; Environmental

Cleaning Your Monitor l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. l Use a slig...

Page 9 - Appendix; CAUTION: Safety Instructions; Contacting Dell

Back to Contents Page Appendix Dell™ SP2008WFP Flat Panel Monitor Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For safety instructions, see the Product Information Guide . FCC Notice (U.S. Only) and Other Regula...

Page 10 - Setting Up Your Monitor

Back to Contents Page Setting Up Your Monitor Dell™ SP2008WFP Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the d...

Page 11 - If you have non DellTM desktop, portable computer, or graphic card

Back to Contents Page Setting Up Your Monitor Dell™ SP2008WFP Flat Panel Monitor If you have non Dell™ desktop, portable computer, or graphic card 1. Right-click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced . 4. Identify your graphics controller supplier from...

Page 13 - User Guide

Dell™ SP2008WFP Flat Panel Monitor Information in this document is subject to change without notice. © 2007 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. T r a d e m a r k s u s e d i n t h i s t e x t : Dell ...

Page 14 - Connecting Your Monitor; O R

Back to Contents Page Setting Up Your Monitor Dell™ SP2008WFP Flat Panel Monitor Connecting Your Monitor Installing the Webcam Application Using the Front Panel Using the OSD Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Connecting Your Monitor CAUTION: B...

Page 16 - Using the OSD Menu

Using the OSD Menu 1. Press the Menu button to open the OSD menu and display the main menu. or OSD menu / select The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See Using the OSD Menu . Down (-) and Up (+) Use these buttons to adjust (de...

Page 24 - OSD Warning Messages; Setting the Optimal Resolution

OSD Warning Messages One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor t...

Page 25 - Soundbar Attachment to the Monitor

Using the Dell Soundbar (Optional) The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a blue LED for power indication, and two audio headset jacks. Soundbar Attachmen...

Page 26 - Solving Problems; Troubleshooting Your Monitor

Back to Contents Page Solving Problems Dell™ SP2008WFP Flat Panel Monitor Troubleshooting Your Monitor General Problems Product Specific Problems USB Problems Troubleshooting Your Soundbar Troubleshooting Your Monitor Self-Test Feature Check (STFC) Your monitor provides a self...

Page 27 - General Problems

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1680 X...

Page 30 - Using Your Monitor Stand; Attaching the Stand; Organizing Your Cables; Using the Tilt

Back to Contents Page Using Your Monitor Stand Dell™ SP2008WFP Flat Panel Monitor Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1. Fit the groove on the monitor to the two tabs on the stand. 2. Lower the monitor until it locks in to ...

Page 31 - Removing the Stand

Removing the Stand 1. Press the stand release button. 2. Lift the stand away from the monitor while pressing the stand release button. Back to Contents Page NOTE: Stand is detached when the monitor is shipped from the factory. NOTE: After placing the monitor panel on a soft cloth or cushion, com...