Dell SE200 - Manuals - manualsarea.com

Page 3 - Contents

iii Contents PowerEdge Cluster SE100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Windows 2000 Advanced Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Windows NT 4.0 Server, Enterprise Edition . . . . . . . . . . . . ...

Page 5 - DellTM PowerEdgeTM Cluster SE100,

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 1 Dell™ PowerEdge™ Cluster SE100, SE200, and SL200 Platform Guide This guide provides the latest information on using Microsoft ® Windows NT ® Server 4.0, Enterprise Edition operating system and Windows ® 2000 Advanced Se...

Page 6 - PowerEdge Cluster SE100; Windows 2000 Advanced Server; Windows NT 4.0 Server, Enterprise Edition

2 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide PowerEdge Cluster SE100 The PowerEdge Cluster SE100 supports clustering with Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server. See the following sections for information on supported configurations and service p...

Page 7 - Windows NT 4.0 Service Pack Support

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 3 Windows NT 4.0 Service Pack Support Windows NT SP 6.0a or later is recommended for PowerEdge Cluster SE100 systems. NOTE: Both nodes must be configured with similar drivers (network interface control-lers [NIC], redunda...

Page 8 - Adding Peripherals Required for PowerEdge 6300 or

4 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide Adding Peripherals Required for PowerEdge 6300 or 6350 WARNING: Hardware installation should be performed only by trained service technicians. Before working inside the computer system, see the safety instructions in your PowerEdge syst...

Page 9 - Windows NT Server 4.0, Enterprise Edition

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 5 Your PowerEdge Cluster SE200 and SL200 system supports the following PowerEdge servers as cluster nodes in homogeneous pairs (same server) with Windows 2000 Advanced Server: • PowerEdge 2400 • PowerEdge 2450 • PowerEdge...

Page 11 - Adding Peripherals Required for PowerEdge 2450 Cluster

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 7 • NICs — You can install NICs in any available PCI slot. • DRAC 2 — If you are currently using a DRAC 2 or plan to use one in the future, install it in PCI slot 6. NOTE: To make sure that the SCSI or RAID controller att...

Page 12 - Adding Peripherals Required for PowerEdge 4400 Cluster; Adding Peripherals Required for PowerEdge 6400 and

8 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide Adding Peripherals Required for PowerEdge 4400 Cluster Nodes WARNING: Hardware installation should be performed only by trained service technicians. Before working inside the computer system, see the safety instructions in your PowerEdg...

Page 13 - Adding Peripherals Required for PowerEdge 8450 Cluster

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 9 • PCI buses — PCI bus 1: PCI slot 1 is 32-bit, 33-MHz — PCI bus 2: PCI slots 2 through 5 are 64-bit, 33-MHz — PCI bus 3: PCI slots 6 and 7 are 64-bit, 33/66-MHz • RAID controllers — RAID controllers can be installed in ...

Page 14 - Adding Peripherals Required for PowerEdge 2300, 43xx,; SL200 Configuration Matrixes

10 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide • RAID controllers — Install the RAID controller for the server’s internal drives in PCI slot 1. — Install additional RAID controllers in any available 64-bit, 33-MHz or 32-bit, 33-MHz PCI slot. — If you use multiple RAID controllers a...

Page 16 - PowerEdge Cluster SE100 Configuration

12 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide PowerEdge Cluster SE100 Configuration Matrix Cluster Type PowerEdge Cluster SE100 Cluster Name Installer Date Installed Applications Location Notes Node PowerEdge Server Model Windows NT Name Node 1 Node 2 Storage Array Description (Dr...

Page 17 - Configuration Matrix

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 13 PowerEdge Cluster SE200/SL200 Configuration Matrix Cluster Type PowerEdge Cluster SE200 or SL200 Cluster Name Installer Date Installed Applications Location Notes Node PowerEdge Server Model Windows NT Name Node 1 Node...