Dell SE100 - Manuals

1-2 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide The PowerEdge Cluster SE100 supports clustering with Windows NT Ser ver 4.0, Enterprise Edition or Windows 2000 Advanced Server. See the following sections for information on supported configurations and ser vice packs (SPs) for your ...

1-4 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide !"#$'% '%& $ %&' ()" * # The following list provides PCI slot assignment information for buses, RAID control-lers, NICs, and a DRAC 2. PCI buses — PCI bus 1: PCI slots 1 through 3 are 32-bit, 33-megahertz (MHz) — PCI b...

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 1-5 Installation instructions for hardware configurations using Windows 2000 Advanced Ser ver can be found in the Dell PowerEdge Cluster SE100, SE200, and SL200 Installation and Troubleshooting Guide . Your PowerEdge Clus...

1-8 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide NICs — NICs can be installed in any available PCI slot. Dell recommends that Giganet cLAN adapters be installed in PCI slots 1 or 2. DRAC 2 — If you are currently using a DRAC 2 or plan to use one in the future, install it in PCI slot...

support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide 1-11 !"#$%%.. '%..! There are no PCI slot requirements or restrictions. The following forms can be attached to the back of each cluster node or rack and may be used by the system installer to record important informat...