Dell SC1425 - Manuals

Back to Contents Page   System Overview Dell™ PowerEdge™ SC1425 Systems User's Guide    Front-Panel Features and Indicators    Back-Panel Features and Indicators    System Features    Supported Operating Systems    Power Protection Devices    Other Documents You May Need    Obtaining Technical Assis...

  Back-Panel Features and Indicators Figure 1 -2 shows the controls, indicators, and connectors located on the system's back panel.   Figure 1- 2. Back- Panel Features and Indicators   Connecting External Devices When connecting external devices to your system, follow these guidelines: l   Install d...

o r ¡   Up to two internal 1-inch SCSI hard drives with an optional SCSI controller card. l   Two integrated Gigabit Ethernet NICs, capable of supporting 10-Mbps, 100-Mbps, and 1000-Mbps data rates. l   Four USB 2.0-compliant connectors (two on the front and two on the back) capable of supporting a ...

  Obtaining Technical Assistance If you do not understand a procedure in this guide or if the system does not perform as expected, see your Installation and Troubleshooting Guide . Dell Enterprise Training and Certification is available; see www.dell.com/training for more information. This service m...

Back to Contents Page   Using the Dell OpenManage™ Server Assistant  Dell™ PowerEdge™ SC1425 Systems User's Guide    Starting the Server Assistant CD    Using the Server Setup Program    Updating Drivers and Utilities    Using the Utility Partition The Dell OpenManage Server Assistant CD contains ut...

  6. Run the program or specify the location to save the files.   Using the Utility Partition The utility partition is a bootable partition on the hard drive that contains system configuration and diagnostic utilities. When you start the utility partition, it boots and provides an executable environ...

Back to Contents Page   Using the System Setup Program Dell™ PowerEdge™ SC1425 Systems User's Guide    Entering the System Setup Program    System Setup Options    System and Setup Password Features    Disabling a Forgotten Password    Asset Tag Utility    Baseboard Management Controller Configurati...

When you enter the System Setup program, the main System Setup program screen appears (see Figure 3 -1 ).   Figure 3- 1. Main System Setup Program Screen Table 3 -2 lists the options and descriptions for the information fields that appear on the main System Setup program screen.   Table 3- 2. System...

Table 3 -3 lists the options and descriptions for the information fields that appear on the CPU Information screen.   Table 3- 3. CPU Information Screen   Integrated Devices Screen Table 3 -4 lists the options and descriptions for the information fields that appear on the Integrated Devices screen. ...

  Console Redirection Screen Table 3 -6 lists the options and descriptions for the information fields that appear on the Console Redirection screen. For more information about using console redirection, see " Using Console Redirection ."   Table 3- 6. Console Redirection Screen Options    Ex...

  1. When prompted, press <Ctrl><Enter> to disable the existing system password. If you are asked to enter your setup password, contact your network administrator.   2. Enter the System Setup program by pressing <F2> during POST.   3. Select the System Security screen field to veri...

  Asset Tag Utility Your system does not support an internal diskette drive, so you must attach an external USB diskette drive to use the Asset Tag utility. You can use the Asset Tag utility to assign a unique tracking number to your system. This number is displayed on the System Setup program main ...

  BMC Setup Module Options Table 3 -7 lists the BMC Setup Module options and shows how to configure the emergency management port (EMP).   Table 3- 7. BMC Setup Module   Back to Contents Page     Option   Description Static IP vs. DHCP Source Displays whether the network controller will be assigned ...

Back to Contents Page   Glossary Dell™ PowerEdge™ SC1425 Systems User's Guide This section defines or identifies technical terms, abbreviations, and acronyms used in your system documents. A — Ampere(s). AC — Alternating current. ACPI — Advanced Configuration and Power Interface. A standard interfac...