Dell S500wi Projector- Manuals

Dell S500wi Projector– User Manual in PDF format online.

Manuals:

User Manual Dell S500wi Projector

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - the Command Code of FW Version, 6 Bytes ASCII Code: “M0RXXX”)

Control Command Syntax (From PC to Projector) [H][AC][SoP][CRC][ID][SoM][COMMAND] [H][AC][SoP][CRC][ID][SoM][COMMAND][Value] Example : Power On Command (Send Low Byte Firstly) Enter the following code: 0xbe, 0xef, 0x10, 0x05, 0x00, 0xc6, 0xff, 0x11, 0x11, 0x01, 0x00, 0x01 Header [H] ==> Fixed, “b...

Page 3 - Control Commands List

Control Commands List Command Description Header (WORD) Address Code (BYTE) Size Of The Payload (WORD) CRC16 For The Entire Packet (WORD) MsG ID (WORD) MsG Size (WORD) Command Code (BYTE) Value (BYTE) Comment Power On 0xefbe 0x10 0x0005 0xffc6 0x1111 0x0001 0x01 See Note 2 Menu 0xefbe 0x10 0x0005 0x...

Page 5 - The range will depend on VGA input resolution; Information in this document is subject to change without notice.; Trademarks used in this text:

H. Frequency 0xefbe 0x10 0x0005 0xfe3c 0x1111 0x0001 0x59 (KHz) V. Frequency 0xefbe 0x10 0x0005 0xbe3d 0x1111 0x0001 0x5a (Hz) H. Sync Polarity 0xefbe 0x10 0x0005 0x7ffd 0x1111 0x0001 0x5b 0x01: Negative 0x02: Postivite V. Sync Polarity 0xefbe 0x10 0x0005 0x3e3f 0x1111 0x0001 0x5c 0x01: Negative 0x0...

Dell Manuals