Dell IN1940MW- Manuals

Page 2 - Dell TM IN1940MW Monitor User's Guide

Dell ™ IN1940MW Monitor User's Guide About Your Monitor Setting Up Your Monitor Operating Your Monitor Troubleshooting Appendix Notes,Cautions,Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardw...

Page 3 - DellTM IN1940MW Monitor User's Guide; Package Contents

Back to Contents Page About Your Monitor Dell™ IN1940MW Monitor User's Guide Package ContentsProduct FeaturesIdentifying Parts and ControlsMonitor SpecificationsPlug and Play CapabilityLCD Monitor Quality and Pixel PolicyMaintenance Guidelines Package Contents Your monitor ships with the components ...

Page 5 - Product Features; DellTM

Product Features The Dell™ IN1940MW display has an active matrix, thin -film transistor (TFT), liquid-crystal display (LCD). The monitor features include: ¦ 48.26 cm (19.0 inches) viewable area display. ¦ 1440 x 900 resolution plus full-screen support for lower resolutions. ¦ Tilt adjustment capabil...

Page 6 - Front Panel Controls

Identifying Parts and Controls Front View Front Panel Controls Label Description 1 Function buttons (For more information, see Operating the Monitor ) 2 Power On/Off button (with LED indicator)

Page 7 - Back View; Label Description

Back View Label Description Use 1 Barcode serial number label To contact Dell for technical support. 2 Regulatory rating label Lists the regulatory approvals. 3 VESA mounting holes (100mm) (Behind attached base plate) To mount the monitor. 4 Security lock slot To help secure your monitor. 5 Dell Sou...

Page 8 - Side View; Right View

Page 9 - Bottom View; Monitor Specifications; Flat Panel Specifications; Model

Bottom View Label Description 1 AC power cord connector 2 DVI connector 3 VGA connector Monitor Specifications Flat Panel Specifications Model Dell IN1940MW Monitor Screen type Active matrix - TFT LCD Panel type TN Screen dimensions 19 inches (19-inch viewable image size) Preset display area 408.24 ...

Page 10 - Resolution Specifications; Supported Video Modes; Display Mode

Pixel pitch 0.2835 mm Viewing angle 160° (vertical) typical, 170° (horizontal) typical Luminance output 25 0 cd/m² (typical) Contrast ratio 1000 to 1 (typical) Faceplate coating Antiglare with hard-coating 3H Backlight LED light bar system Response Time 5 ms typical Color depth 16.7 millions colors ...

Page 12 - Environmental Characteristics; Temperature

Dimensions (with stand) Height 372.9 mm (14.68 inches) Width 443.8 mm (17.47 inches) Depth 163.5 mm (6.44 inches) Dimensions (without stand) Height 290.8 mm (11.45 inches) Width 443.8 mm (17.47 inches) Depth 52.0 mm (2.05 inches) Stand dimensions Height 140.4 mm (5.53 inches) Width 236.0 mm (9.29 in...

Page 13 - Power Management Modes

Non-operating Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing) Altitude Operating 3,048 m (10,000 ft) max Non-operating 10,668 m (35,000 ft) max Thermal dissipation 78.5 BTU/hour (maximum) 58.0 BTU/hour (typical) Power Management Modes If you have VESA's DPM™ compliance displ...

Page 14 - Pin Assignments; VGA Connector; Pin

Pin Assignments VGA Connector Pin Number 15 -pin Side of the Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H -sync 14 V -sync 15 DDC clock

Page 15 - DVI Connector

DVI Connector Pin Number 24 -pin Side of th e Co nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0 - 18 TM...

Page 16 - Plug and Play Capability; LCD Monitor Quality and Pixel Policy; Cleaning Your Monitor; Read and follow the

22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides its Extended Display Identification Data (EDID) to the computer using Display Data Channel (DDC) protocols so the computer can ...

Page 17 - Setting Up the Monitor; Attaching the Stand

Back to Contents Page Setting Up the Monitor Dell™ IN1940MW Monitor User's Guide Attaching the Stand Removing the Monitor Stand for VESA Wall Mount Connecting Your Monitor Attaching Dell Soundbar AX510PA (optional) Attaching the Stand NOTE: The stand base is detached when the monitor is shipped from...

Page 19 - Removing the Monitor Stand for VESA Wall Mount

Removing the Monitor Stand for VESA Wall Mount To remove the stand assembly from the monitor: 1. Place the monitor panel on soft cloth or cushion on a stable flat table. 2. Use a long screwdriver to push the release latch located in a hole just above the stand. 3. Once the latch is released, remove ...

Page 20 - Connecting Your Monitor

Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions . To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. Connect the blue (VGA) cable from your monitor to your computer. NOTE: If your ...

Page 22 - Attaching Dell Soundbar AX510PA (optional)

Attaching Dell Soundbar AX510PA (optional) CAUTION: Do not use with any device other than the Dell soundbar. To attach the soundbar: 1. Working from the back of the monitor, attach soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the soundbar to the left...

Page 23 - Power On the Monitor; Using the Front Panel Controls

Back to Contents Page Operating the Monitor Dell™ IN1940MW Monitor User's Guide Power On the Monitor Using the Front Panel Controls Using the On -Screen Display (OSD) Menu Setting the Maximum Resolution Using Dell Soundbar Using the Tilt Power On the Monitor Press the button to turn on the monitor. ...

Page 25 - Front Panel Button

Front Panel Button Use the buttons on the front of the monitor to adjust the image settings. Front Panel Button Description 1 Up Use the Up button to adjust (increase ranges) items in the OSD menu. 2 Down Use the Down button to adjust (decrease ranges) items in the OSD menu. 3 OK Use the OK button t...

Page 26 - Accessing the Menu System

Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disap...

Page 39 - OSD Warning Messages

OSD Warning Messages When the Energy Smart feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. When the monitor does not support a particular resolution mode, you will see the following message: This means that the monitor cannot synchronize with ...

Page 42 - Setting the Maximum Resolution

Setting the Maximum Resolution To set the maximum resolution for the monitor. Windows Vista® or Windows® 7: 1. Right-click on the desktop and select Personalization . 2. Click Change Display Settings . 3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the scree...

Page 43 - Using Dell Soundbar

Using Dell Soundbar The soundbar has an on/off power and rotary volume control to adjust the overall sound system, a LED for power indication and two audio headset jacks. 1 Attach mechanism 2 Power/Volume control 3 Headphone jacks 4 Power indicator

Page 44 - Using the Tilt; Tilt

Using the Tilt Tilt You can tilt the monitor for the most comfortable viewing angle. NOTE: The stand is detached when the monitor is shipped from the factory. Back to Contents Page

Page 45 - Troubleshooting

Back to Contents Page Troubleshooting Dell™ IN1940MW Monitor User's Guide Self-Test Common Problems Product Specific Problems Dell Soundbar Problems WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions . Self-Test Your monitor provides a self-test feature t...

Page 49 - Appendix; WARNING: Safety Instructions; Contacting Dell; Choose A Country/Region

Back to Contents Page Appendix Dell™ IN1940MW Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result...

Page 50 - Back to Contents Page

Page 51 - Setting Up Your Monitor; Setting the display resolution to 1440 x 900 (maximum); If you have a non DellTM desktop, portable computer, or graphics card.

Back to Contents Page Setting Up Your Monitor Dell™ IN1940MW Monitor User's Guide Setting the display resolution to 1440 x 900 (maximum) For optimal display performance while using the Microsoft Windows ® operating systems, set the display resolution to 1440 x 900 pixels by performing the following ...

Page 53 - If you have a non DellTM desktop, portable computer, or graphics card

Back to Contents Page Setting Up Your Monitor Dell™ IN1940MW Monitor User's Guide If you have a non Dell™ desktop, portable computer, or graphics card In Windows Vista ® or Windows 7: 1. Right-click on the desktop and click Personalization . 2. Click Change Display Settings . 3. Click Advanced Setti...