Dell H810- Manuals

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 5 Introduction Overview This Microsoft ® Exchange 2010 solution architecture manual contains possible configurations that can be used to architect your Exchange 2010 infrastructure. Samples in the manual are intended to serve...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 6 Hardware Sample solutions described in this manual use the following Dell equipment:  PowerEdge R720xd  PowerEdge R620  PowerVault MD1200  PowerVault MD1220 Click on the links to the product landing pages for additional...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 7 1500 mailboxes, up to 3GB each, on PowerEdge R720xd This reference architecture utilizes the Multi-role server and storage ―bricks‖ with internal storage. It has been sized to provide mailbox sizes of up to 3GB each. The Ma...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 8 Recommended Solution Server Configurations Detail Multi-role (Mailbox/Hub/CAS) server 2 x Dell PowerEdge R720xd servers with 3.5‖ drive bays 2 x Intel ® Xeon ® processor E5-2600 product family (6 core or better per processo...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 9 2,000 Mailboxes, up to 3GB each, on PowerEdge R720xd This reference architecture utilizes the Multi-role server and storage ―bricks‖ with internal storage. It has been sized to provide mailbox sizes of up to 3GB each. The M...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 11 2,500 Mailboxes, up to 3GB each, on PowerEdge 720xd with PowerVault MD1200 This reference architecture utilizes the Multi-role server and storage ―bricks‖ with internal storage and external storage. It has been sized to pr...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 13 4,000 Mailboxes, up to 1GB each, on PowerEdge R720xd This reference architecture utilizes the Multi-role server and storage ―bricks‖ with internal storage. It has been sized to provide mailbox sizes of up to 1GB each. The ...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 15 5,000 Mailboxes, up to 5GB each, on PowerEdge R720xd with PowerVault MD1200 This reference architecture utilizes the Multi-role server and storage ―bricks‖ with internal and external storage. It has been sized to provide m...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 16 Recommended Solution Server Configurations Detail Multi-role (Mailbox/Hub/CAS) server 2x PowerEdge R720xd Servers with 3.5‖ drive bays 2 x Intel ® Xeon ® processor E5-2600 product family (8 cores) 64GB of DDR3 RAM Number o...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 17 5,000 Mailboxes, up to 3GB each, Multi-Site Configuration, on PowerEdge R620 with PowerVault MD1200 This reference architecture utilizes the Multi-role server and storage ―bricks‖ with external storage. It has been sized t...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 22 Recommended solution Server Configurations Detail Multi-role (Mailbox/Hub/CAS) server 2 x PowerEdge R720xd server with 2.5‖ drive bays 2 x Intel ® Xeon ® processor E5-2600 product family (8 cores) 96GB of DDR3 RAM Number o...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 23 25,000 Mailboxes, up to 4GB each, Multi-Site configuration, on PowerEdge R720xd with PowerVault MD1200 This reference architecture utilizes the Multi-role server and storage ―bricks‖ with internal and external storage. It ...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 24 Architecture Diagram ACT 32 33 34 35 30 31 28 29 26 27 24 25 40 41 42 43 38 39 36 37 20 21 22 23 18 19 16 17 14 15 12 13 8 9 10 11 6 7 4 5 2 3 0 1 LNK/SPD RS-232 USB-B STACK ID ACT LNK Ethernet Mas ter PSU 1 FAN 1 PSU 2 FA...

Microsoft Exchange 2010 on Dell Systems: Simple Distributed Configurations 25 ACT 32 33 34 35 30 31 28 29 26 27 24 25 40 41 42 43 38 39 36 37 20 21 22 23 18 19 16 17 14 15 12 13 8 9 10 11 6 7 4 5 2 3 0 1 LNK/SPD RS-232 USB-B STACK ID ACT LNK Ethernet Mas ter PSU 1 FAN 1 PSU 2 FAN 2 SYS ALM USB-A 44 ...

NOTE: There is a delay to I/O operations when a configured disk is being spun up. Types Of Virtual Disk Initialization You can initialize the virtual disks as described in the following sections: CAUTION: The initializing virtual disks task erases the files and file systems while keeping the virtual...

Disk Roaming Disk roaming is moving the physical disks from one cable connection or backplane slot to another on the same controller. The controller automatically recognizes the relocated physical disks and logically places them in the virtual disks that are part of the disk group. You can perform d...

Table 2. FastPath Eligibility Across Supported RAID Levels RAID 0 RAID 1 RAID 5 RAID 6 Read Yes Yes(Optimal and Degraded) Yes(Optimal and Degraded) Yes(Optimal and Degraded) Write Yes No No No In addition, FastPath-capable virtual disks are characterized by the following: • The presence of CacheCade...

3. Boot the system and import the foreign configuration that is detected. You can do one of the following: – Press <F> to automatically import the foreign configuration.– Enter the BIOS Configuration Utility and navigate to the Foreign Configuration View. NOTE: For more information on accessin...

Source RAID Level Target RAID Level Number of Physical Disks (Beginning) Number of Physical Disks (End) Capacity Expansion Possible Description disk space used for distributed parity data. RAID 6 RAID 5 4 or more 4 or more Yes Removes one set of parity data and reclaims disk space used for it. RAID ...

of a virtual disk. The target disk needs to be a hot spare that qualifies as a rebuild disk. The physical disk with the SMART error is marked as failed only after the successful completion of the Replace Member. This avoids putting the array in degraded status.If an automatic Replace Member occurs u...

Physical Disk Failure Detection Failed physical disks are detected and rebuilds automatically start to new disks that are inserted into the same slot. Automatic rebuilds can also happen transparently with hot spares. If you have configured hot spares, the controllers automatically try to use them to...

Controller Cache Preservation The controller is capable of preserving its cache in the event of a system power outage or improper system shutdown. The PERC H710, H710P, and H810 controllers are attached to a Battery Backup Unit (BBU) that provides backup power during system power loss to preserve th...

3 Deploying The PERC Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that...

1. release lever (2)2. PERC stack-up connector3. PERC mini blade controller4. screws (2) Figure 3. Removing and Installing the PERC Mini Monolithic Controller 1. release lever (2)2. storage-controller card holder 3. storage controller card4. battery5. heatsink 6. touch points (2)7. storage-controlle...

3. Install the storage controller in the appropriate controller slot and connect all the cables to the storage controller. CAUTION: When removing or replacing the PERC Mini Monolithic Controller, hold the card by its edges marked by the blue touch points. Do not handle the card while holding the bat...

4 Driver Installation The Dell PowerEdge RAID Controller (PERC) H310, H710, H710P, and H810 cards require software drivers to operate with the supported operating systems. This chapter contains the procedures for installing the drivers for the PERC H310, H710, H710P, and H810 cards. NOTE: For more i...

9. Reboot the system when prompted. Updating Existing Windows Server 2008 Or Windows Server 2008 R2 NOTE: Close all applications on your system before you update the driver. 1. Insert the media (CD, DVD, or USB drive) containing the driver. 2. Select Start → Settings → Control Panel → System. The Sy...

Installing Or Updating The RPM Driver Package With DKMS Support NOTE: This procedure is applicable for Red Hat Enterprise Linux 5 SP7 and SUSE Enterprise Linux 10 SP4. NOTE: For SUSE Enterprise Linux 10 SP4, immediately following the operating system installation, download the latest driver from del...

5 Management Applications For PERC Cards Dell OpenManage Storage Management applications enable you to manage and configure the RAID system, create and manage multiple disk groups, control and monitor multiple RAID systems, and provide online maintenance. The management applications for PERC H310, H...

Notation Meaning and Use Example down- arrow key Use the down-arrow key to move to the lower menu items within a menu or to a lower level menu. You can also use the down-arrow key to open a menu list in a popup window, such as the stripe element size menu, and select a setting. Word wrap is supporte...

Parameter DescriptionNo-Read-Ahead specifies that the controller does not use read ahead for the current virtual disk.Adaptive specifies that the controller begins using Read-Ahead if the two most recent disk accesses occurred in sequential sectors. If all read requests are random, the algorithm rev...

15. Press the spacebar to make the settings active so that you can change them. An X is displayed beside Advanced Settings. The settings are the stripe element size, read policy, and write policy. You can also choose advanced options such as forcing the cache policy to Write-Back, initializing the v...

5. Press <Enter>. Converting Physical Disk To Non-RAID For PERC H310 Conversion of a Physical Disk to Non-RAID allows direct operating system access to the drive. Non-RAID disks cannot be used within a Virtual Disk nor can they be used as Hot Spares. 1. Press <Ctrl> <N> to access t...

The Consistency Check runs and checks the redundancy data in the virtual disks. 7. After you start the Consistency Check, press <Esc> to display the previous menu if needed. Importing Or Clearing Foreign Configurations Using The VD Mgmt Menu When a foreign configuration exists, the BIOS screen...

Break Mirror A Break Mirror operation is an operation that can be performed only on RAID1 arrays. It provides a way to 'split' the mirror and spin-down one of the hard disks, which can then be imported into the configuration of a different PERC H310, H710, H710P, or H810 controller. This can be a us...

Perform the following steps to select whether to import the virtual disk or discard the preserved cache: 1. On the VD Mgmt screen, click on a controller icon. 2. Press <F2> to display the available actions. 3. Select Manage Preserved Cache.A message is displayed advising you to import the fore...

BIOS Configuration Utility Menu Options The first menu that is displayed when you access the BIOS Configuration Utility <Ctrl> <R> is the main menu screen. It lists the controller, controller number, and other information, such as the slot number. On the screen, you can use the arrow key...

Menu Item Selected in Left Panel Information Displayed in Right Panel • Number of physical disks (PD) • Space available on the physical disks • Number of free segments • Number of dedicated hot spares Hot Spares Physical Disk Properties: • Vendor name • Physical disk state • Enclosure Position • Slo...

Physical Disk Management (PD Mgmt) The Physical Disk Management screen (PD Mgmt) displays physical disk information and action menus. The screen displays physical disk IDs, vendor names, disk size, type, state, and disk group (DG). You can sort the list of physical disks based on the headings. You c...

Action Description Remove HS Removes a dedicated hot spare from its disk group or a global hot spare from the global pool of hot spares. Rebuild Select Rebuild to rebuild one or more failed physical disks. For information on performing a physical disk rebuild, see the topic Performing A Manual Rebui...

Option Descriptioncontroller and disable it on the other controllers. The system can then boot from the BIOS-enabled controller. Enable BIOS Stop On Error Select the option to stop the system BIOS during bootup if there are BIOS errors. The option enables you to enter the configuration utility to re...

Controller Management Enabling Boot Support NOTE: See your system documentation to ensure the proper boot order is selected in the system BIOS. In a multiple controller environment, you can enable BIOS on multiple controllers. However, if you want to boot from a specific controller, enable the BIOS ...

NOTE: The controller automatically imports every optimal and degraded foreign configuration without enabling the feature if there is no native configuration on the controller. To enable Auto Import: 1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen. 2. Press <Tab> to move the...

* Safe mode on errors: The system will continue booting as long as the boot volume is not on this controller. Drives connected to the controller will be reported as unconfigured good drives to the RAID management utilities upon a successful boot. No configuration changes will be allowed, except to c...

6 CacheCade The Dell PowerEdge RAID Controller (PERC) H710, H710P, and H810 cards support CacheCade, a feature that can improve application performance by increasing read caching capacity. The CacheCade feature makes use of high performing solid state disks (SSDs) as a secondary tier of cache. Cache...

Deleting CacheCade Virtual Disks To delete CacheCade virtual disks, perform the following steps in the BIOS Configuration Utility: 1. Press <Ctrl> <N> to access the Virtual Disk Management screen. 2. Use the arrow keys to move the cursor to the CacheCade Disk Group or Virtual Disks headi...

7 Security Key And RAID Management NOTE: PERC H310 does not support any security implementations. Security Key Implementation The Dell PowerEdge RAID Controller (PERC) H710, H710P, and H810 cards support Self-Encrypting Disks (SED) for protection of data against loss or theft of SEDs. Protection is ...

Creating A Security Key Perform the following steps to create a security key on the controller: NOTE: There is no passphrase backup option when you create a security key; you need to remember your passphrase. 1. During the host system boot up, press <Ctrl> <R> when the BIOS screen is dis...

NOTE: If there is an existing configuration on the controller, it is updated with the new security key. If you had previously removed any secured disks, you still need to supply the old passphrase to import them. Deleting A Security Key NOTE: Delete Key is active if there is a security key present o...

3. Press <F2> to display a menu of available actions. 4. Select Import to import the foreign configuration or Clear to delete the foreign configuration. Press <Enter>. NOTE: To Clear, you need to Instant Secure Erase foreign configurations secured with a different security key. 5. If you...

there is a security key present. Select the Secure VD option as No in the Create New VD menu. See the topic Creating Virtual Disks for steps on how to create an unsecured virtual disk. Failure To Delete Security Key A security key is used to lock or unlock access to a security-enabled component. Thi...

8 Troubleshooting To get help with your Dell PowerEdge RAID Controller (PERC) H310, H710, H710P and H810, you can contact your Dell Technical Service representative or see dell.com/support. BIOS Error Messages The controller BIOS read-only memory (ROM) provides Int 13h functionality (disk I/O) for t...

• The controller detects an Error-Correcting Code (ECC) error while performing its cache checking routine during initialization. • The controller discards the cache rather than sending it to the disk subsystem because the data integrity cannot be guaranteed. Corrective Action: To resolve this issue,...

Corrective Action: Check the cable connections and fix any issues. Restart the system. If there are no cable problems, press any key or <C> to continue. Dirty Cache Data Error Message Error Message: The following virtual disks are missing: (x). If you proceed (or load the configuration utility...

Corrective Action: Check the cable connections and fix any problems before restarting the system. If there are no cable problems, press any key or <Y> to continue. Adapter At Baseport Not Responding Error Message Error Message: Adapter at Baseport xxxx is not responding, where xxxx is the base...

Virtual Disks Partially Degraded Error Message Error Message: x Virtual Disk(s) Partially Degraded, where x is the number of virtual disks partially degraded. Probable Cause: This message is displayed when the BIOS detects a single disk failure in a RAID 6 or RAID 60 configuration. Corrective Action...

Foreign Configuration Not Found In <Ctrl> <R> Error Message Error Message: The foreign configuration message is present during POST but no foreign configurations are present in the foreign view page in <Ctrl> <R>. All virtual disks are in an optimal state . Corrective Action:...

CAUTION: When removing or replacing the PERC Mini Monolithic Controller, hold the card by its edges marked by the blue touch points. Do not handle the card while holding the battery or the heatsink. For more information, see figure “Removing and Installing the PERC Mini Monolithic Controller” in Rem...

To recover a virtual disk from a degraded state, you must replace the failed physical disk and rebuild it. Once the rebuilding process is complete, the virtual disk state changes from degraded to optimal. For information on rebuilding the disk, see the topic Performing A Manual Rebuild Of An Individ...

Corrective Action: The issue occurs because of any of the following causes: • The driver is not native in the operating system.To resolve the issue, press <F6> to install the RAID device driver during installation. • The virtual disks are not configured properly.To resolve the issue, enter the...

Multiple Disks Become Inaccessible Issue: Rebuilding the physical disks after multiple disks become simultaneously inaccessible. Corrective Action: Multiple physical disk errors in a single array typically indicate a failure in cabling or connection and could involve the loss of data. You can recove...

Physical Disk Fails During Reconstruction On Redundant Virtual Disk Issue: A physical disk fails during a reconstruction process on a redundant virtual disk that has a hot spare. Corrective Action: The dedicated hot spare goes to Ready state and the virtual disk goes to Failed state. Virtual Disk Fa...

Smart Error Detected On A Physical Disk In A Non-Redundant Virtual Disk Issue: A SMART error is detected on a physical disk in a redundant virtual disk. Corrective Action: Perform the following steps: 1. Back up your data.2. Use Replace Member or set up a global hot spare to replace the disk automat...

Corrective Action: The error message is displayed when the Linux Small Computer System Interface (SCSI) mid-layer asks for physical disk cache settings. The controller firmware manages the virtual disk cache settings on a per controller and a per virtual disk basis, so the firmware does not respond ...

Disk Carrier LED Indicators The LED on the physical disk carrier indicates the state of each physical disk. Each disk carrier in your enclosure has two LEDs: an activity LED (green) and a status LED (bicolor, green/amber). The activity LED is active whenever a disk is being accessed while the status...

9 Appendix: RAID Description RAID is a group of independent physical disks that provides high performance by increasing the number of disks used for saving and accessing data. CAUTION: In the event of a physical disk failure, a RAID 0 virtual disk fails, resulting in data loss. A RAID disk subsystem...