Dell Force10 E300- Manuals

Dell Force10 E300– User Manual in PDF format online.

Manuals:

User Manual Dell Force10 E300

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Upgrading Hardware; ExaScale SFM Requirements; FPGA Upgrades; Message 1

TeraScale to ExaScale Upgrade Procedure 2 Upgrading Hardware ExaScale SFM Requirements E-Series ExaScale systems and FTOS Release 8.1.1.1 require SFM version 752-00265-03 Rev 01 or higher. Earlier SFMs do not support line rate following the ExaScale 8.1.1.1 FPGA upgrade. Do not mix SFMs. All the SFM...

Page 3 - Figure 1; Verify the result of the SFM version upgrade using the

TeraScale to ExaScale Upgrade Procedure 3 Automatic upgrade during boot, reboot, reload, or restart The FPGA auto upgrade takes place when any SFMs in the chassis run an FPGA version lower than the version running during the boot, reboot, reload and restart operations. During the auto upgrade proces...

Page 4 - Automatic upgrade for one or more new SFMs; Figure 2

TeraScale to ExaScale Upgrade Procedure 4 Automatic upgrade for one or more new SFMs The FPGA auto upgrade takes place when any newly inserted SFM runs an FPGA version lower than the version running on the SFMs in the chassis. During this auto upgrade process, the system displays messages relaying t...

Dell Manuals