Dell E6530- Manuals

5. Remove the screw that secures the hard-drive caddy to the hard drive. 6. Remove the hard-drive caddy from the hard drive. 7. Remove the hard-drive isolation from the hard drive. Installing the Hard Drive 1. Install the hard-drive isolation on the hard drive. 2. Attach the hard-drive caddy to the ...

3. Tighten the screws to secure the hard-drive caddy to the hard drive. 4. Slide the hard drive into the computer. 5. Tighten the screws to secure the hard drive to the computer. 6. Install the battery. 7. Follow the procedures in After Working Inside Your Computer. Removing the Optical Drive 1. Fol...

7. Remove the screws that secure the optical-drive latch bracket to the optical-drive assembly 8. Remove the latch bracket from the optical drive. 9. Remove the optical-drive door from the optical drive. Installing the Optical Drive 1. Secure the optical-drive door to the optical drive. 2. Install t...

a) batteryb) base cover 3. Disconnect the heat-sink cable. 4. Remove the screws that secure the heat sink to the system board. 5. Remove the heat sink from the computer. Installing the Heat Sink 1. Slide the heat sink into its original position in the system board. 2. Tighten the screws to secure th...

Removing the Bluetooth Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) batteryb) base cover 3. Remove the screw that secures the bluetooth card to the computer. 4. Disconnect the bluetooth cable from the system board. 5. Remove the bluetooth card from the comp...

5. Disconnect the modem cable from the modem card. 6. Grasp the modem card and remove the it from the computer. Installing the Modem Card 1. Insert the modem card in its slot 2. Seat the modem card, to ensure that the tab on the back of the card is engaged. 3. Connect the modem cable to the modem ca...

Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) batteryb) base coverc) hard drived) keyboard trime) keyboardf) display assembly g) palmresth) media board (available in E6430/E6430 ATG only)i) ExpressCard cage j) bluetooth card k) system board 3. Re...

4. Remove the screw securing the power LED board to the display assembly. 5. Remove the power LED board from the display assembly. Installing the Power LED Board 1. Place the power LED board in its compartment in the display assembly. 2. Tighten the screw to secure the LED board to the display assem...

c) media board (available in E6430/E6430 ATG only)d) palmreste) display assemblyf) keyboard g) keyboard trimh) bluetooth cardi) hard drive j) optical drive k) base coverl) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Hard-Drive Support Plate 1. Follow the proc...

8. Remove the screws to release the display assembly on both sides. 9. Lift the display assembly and pull the LVDS and the antenna cables through the opening of the computer. 10. Remove the display assembly from the computer. Installing the Display Assembly 1. Place the display assembly onto the com...

3. Tighten the screws on both corners to secure the display assembly. 4. Route the antenna and the LVDS cables through the routing channel. 5. Connect the following cables to the computer: a) LVDSb) camera 6. Connect the LVDS support bracket in its position on the computer. 7. Tighten the screw to s...

3. Tighten the screws on both corners to secure the display assembly. 4. Route the antenna and the LVDS cables through the routing channel. 5. Connect the following cables to the computer: a) LVDSb) camera 6. Connect the LVDS support bracket in its position on the computer. 7. Tighten the screw to s...

5. Remove the screws that secures the display hinges to the display assembly. 6. Remove the display hinges from the display assembly. Installing the Display Hinges 1. Place both the display hinges on the panel. 2. Tighten the screws to secure the display hinges to the display assembly. 3. Place the ...

i) battery 6. Follow the procedures in After Working Inside Your Computer. Removing the Camera 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) batteryb) display assemblyc) display bezeld) display panel 3. Disconnect the LVDS and camera cable from the camera. 4. Remove ...

5. Remove the LVDS and camera cable from the display assembly. Installing the LVDS and Camera Cable 1. Route the LVDS and camera cable on the display assembly. 2. Fix the adhesive the tape to secure the cable. 3. Connect the LVDS and camera cable to the camera. 4. Install: a) display hingesb) displa...

3 Additional Information This section provides information for the additional features that are part of your computer. Docking Port Information The docking port is used for connecting the laptop to a docking station (optional). 1. Docking Port 59

4 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance an...

Keys Navigation <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For the standard graphics browser only. <Esc> Moves...

Table 9. Virtualization Support Option Description Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization technology. • Enable Intel Virtualization Technology - Default Setting. VT for Direct I/O ...

3. If you have your computer's Service Tag or Express Service Code: NOTE: For desktops, the service tag label is available on the front of your computer. NOTE: For notebooks, the service tag label is available on the bottom of your computer. a) Enter the Service Tag or Express Service Code and click...

5 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the pro...

6 Troubleshooting Your Computer You can troubleshoot your computer using indicators like Diagnostic Lights, Beep Codes, and Error Messages during the operation of the computer. Device Status Lights Table 13. Device Status Lights Turns on when you turn on the computer and blinks when the computer is ...

Battery Status Lights If the computer is connected to an electrical outlet, the battery light operates as follows: Alternately blinking amber light and white light An unauthenticated or unsupported non-Dell AC adapter is attached to your laptop. Alternately blinking amber light with steady white lig...

7 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about you...

8 Contacting Dell To contact Dell for sales, technical support, or customer service issues: 1. Visit support.dell.com. 2. Verify your country or region in the Choose a Country/Region drop-down menu at the bottom of the page. 3. Click Contact Us on the left side of the page. 4. Select the appropriate...