Dell E6330- Manuals

After Working Inside Your Computer After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer. CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries...

2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • Phillips screwdriver • Small plastic scri...

Removing the Bluetooth Module 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Remove the base cover. 4. Disconnect the bluetooth cable from the system board. 5. Remove the bluetooth cable from its routing on the computer. 6. Remove the screw that secures th...

7. Disconnect the power LED cable from the system board. 8. Lift the palmrest up and away from the computer. Installing the Palmrest 1. Align the palmrest assembly to its original position in the computer and snap it into place. 2. Connect the following cables to the system board:a) power LED cableb...

Removing the Media Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrest 3. Disconnect the media-board cable from the system board. 4. Remo...

4. Remove the screws that secure the ExpressCard cage to the computer. 5. Remove the ExpressCard cage from the computer. Installing the ExpressCard Cage 1. Insert the ExpressCard cage into its compartment. 2. Tighten the screws to secure the ExpressCard cage to the computer. 3. Connect the ExpressCa...

Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrest 3. Disconnect the speaker cable from the system board. 4. Release the...

6. Remove the speakers from the computer. Installing the Speakers 1. Align the speakers to their original position and tighten the screws to secure the speakers to the computer. 2. Route the speaker cable on the computer and connect it to the system board. 3. Install:a) palmrestb) bluetooth modulec)...

3. Remove the screws that secure the display-hinge covers to the computer. 4. Remove the display-hinge covers from the computer. Installing the Display Hinge Covers 1. Tighten the screws to secure the display hinge covers to the computer. 2. Install:a) palmrestb) bluetooth modulec) keyboardd) keyboa...

Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrest 3. Release the antenna cables from their routing on the compu...

10. Remove the display assembly from the computer. Installing the Display Assembly 1. Route the antennae cables through the opening on the system board. 2. Connect the LVDS cable to the system board. 3. Tighten the screws to secure the LVDS support bracket to the system board. 4. Tighten the screw t...

Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrestk) media boardl) display-hinge coversm) display assembly 3. Discon...

9. Remove the system board from the computer. Installing the System Board 1. Connect the power connector cable to the system board. 2. Tighten the screws to secure the system board to the computer. 3. Connect the following cables to the system board:a) speakerb) ExpressCardc) coin-cell battery 4. In...

Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrestk) media boardl) display hinge coversm) display assemblyn) system boa...

5. Remove the heat sink from the system board. Installing the Heat Sink 1. Place the heat sink into its original position on the system board. 2. Tighten the screws to secure the heat sink to the system board 3. Connect the heat-sink cable to the system board. 4. Install:a) system boardb) display as...

Removing the Power Connector Port 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrestk) media boardl) display hinge coversm) display assemblyn)...

5. Remove the power connector port from the computer. Installing the Power-Connector Port 1. Place the power-connector port on the computer. 2. Place the power-connector bracket over the power-connector port. 3. Tighten the screw to secures the power-connector bracket to the computer. 4. Install:a) ...

Removing the Input/Output (I/O) Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrestk) media boardl) display hinge coversm) display assemb...

3. Install:a) system boardb) display assemblyc) display hinge coversd) media boarde) palmrestf) bluetooth moduleg) keyboardh) keyboard trimi) base coverj) optical drivek) hard drivel) batterym) ExpressCardn) SD card 4. Follow the procedures in After Working Inside Your Computer. Removing the Display...

5. Flip and place the display panel over. 6. Peel off the LVDS cable connector tape and disconnect the LVDS cable from the display panel. 7. Remove the display panel from the display assembly. Installing the Display Panel 1. Connect the display cable (LVDS cable) to its connector on the display pane...

Removing the Camera and Microphone Module 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) batteryb) display bezel 3. Remove the screws that secure the camera and microphone module to the display assembly. 4. Disconnect the camera and microphone module cable from the mod...

4. Install:a) display bezelb) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the LED Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) batteryb) display bezelc) display panel 3. Remove the screw that secures the LED board to the dis...

6. Remove the screw that secures the LED board to the LED-board support plate. 7. Remove the LED board from the LED-board support plate. Installing the LED Board 1. Tighten the screw to secure the LED board to the LED board support plate. 2. Place the LED board plate in its compartment in the displa...

Removing the Display-Hinge Walls 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrestk) media boardl) display hinge coversm) display assemblyn) ...

3. Remove the screw that secures the left display hinge to the display assembly. 4. Remove the left display hinge wall out of the display assembly. 5. Repeat steps 3 and 4 to remove the right display hinge. Installing the Display Hinges 1. Place both the display hinges on the panel. 2. Tighten the s...

Removing the LVDS and Camera Cable 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrestk) media boardl) display hinge coversm) display assemblyn...

5. Pry up the LVDS and camera cable from the display assembly. 6. Remove the LVDS and camera cable from the display assembly cover. Installing the LVDS and Camera Cable 1. Route the LVDS and camera cable on the display assembly. 2. Fix the adhesive the tape to secure the cable. 3. Connect the LVDS a...

3 Docking Port Information The docking port is used for connecting the laptop to a docking station (optional). 1. Docking Port 59

4 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance an...

Keys Navigation <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For the standard graphics browser only. <Esc> Moves...

5 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the pro...

Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. The device status LEDs are usually located either on the top or left side of the keyboard. They are used to display the storage, battery and wireless devices connectivity and activity. Apart ...

6 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For comprehensive specification of your computer go to Specifications’ section in your Owner’s Manual available on the support site at dell.com/suppo...

7 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, ...

5. Remove the screw that secures the hard-drive bracket to the hard drive. 6. Pull the hard-drive bracket out of the hard drive. 7. Remove the hard-drive isolations from the hard drive. Installing the Hard Drive 1. Install the hard-drive isolations on the hard drive. 2. Attach the hard-drive bracket...

Removing the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Push in the eject handle on the optical drive to release it. 4. Slide and remove the hard drive out of the computer. 5. Remove the screw that secures the drive latch to the optical d...

7. Remove the screws that secure the drive-latch bracket to the optical drive. 8. Remove the drive-latch bracket from the optical drive. 9. Pull and remove the drive caddy away from the optical drive. Installing the Optical Drive 1. Secure the optical drive caddy to the optical drive. 2. Secure the ...

9. Disconnect the keyboard cable from the keyboard. 10. Remove the keyboard cable from the keyboard. Installing the Keyboard 1. Connect the keyboard cable and secure it to the keyboard using the tape. 2. Connect the keyboard cable to the system board. 3. Slide the keyboard into its compartment and e...

6. Remove the screw that secures the bluetooth module to the computer. 7. Remove the bluetooth module from the computer. 8. Disconnect the bluetooth cable from the bluetooth module. Installing the Bluetooth Module 1. Connect the bluetooth cable to the bluetooth card. 2. Connect the other end of the ...

7. Disconnect the power LED cable from the system board. 8. Lift the palmrest up and away from the computer. Installing the Palmrest 1. Align the palmrest assembly to its original position in the computer and snap it into place. 2. Connect the following cables to the system board:a) power LED cableb...

f) hard driveg) batteryh) ExpressCardi) SD card 6. Follow the procedures in After Working Inside Your Computer. Removing the Media Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard ...

4. Remove the screws that secure the ExpressCard cage to the computer. 5. Remove the ExpressCard cage from the computer. Installing the ExpressCard Cage 1. Insert the ExpressCard cage into its compartment. 2. Tighten the screws to secure the ExpressCard cage to the computer. 3. Connect the ExpressCa...

j) SD card 5. Follow the procedures in After Working Inside Your Computer. Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard drivee) optical drivef) base coverg) keyboard trimh) keyboardi) bluetooth modulej) pal...

6. Remove the speakers from the computer. Installing the Speakers 1. Align the speakers to their original position and tighten the screws to secure the speakers to the computer. 2. Route the speaker cable on the computer and connect it to the system board. 3. Install:a) palmrestb) bluetooth modulec)...

f) base coverg) keyboard trimh) keyboardi) bluetooth modulej) palmrest 3. Remove the screws that secure the display-hinge covers to the computer. 4. Remove the display-hinge covers from the computer. Installing the Display Hinge Covers 1. Tighten the screws to secure the display hinge covers to the ...

8. Disconnect the power-connector cable from the system board. 9. Remove the system board from the computer. Installing the System Board 1. Connect the power connector cable to the system board. 2. Tighten the screws to secure the system board to the computer. 3. Connect the following cables to the ...

g) keyboard trimh) base coveri) optical drivej) hard drivek) batteryl) ExpressCardm) SD card 5. Follow the procedures in After Working Inside Your Computer. Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) batteryd) hard dri...

k) media boardl) display hinge coversm) display assemblyn) system board 3. Remove the screw that secures the power connector port to the computer. 4. Remove the power connector bracket from the computer. 5. Remove the power connector port from the computer. Installing the Power-Connector Port 1. Pla...

a) batteryb) display bezel 3. Remove the screws that secure the camera and microphone module to the display assembly. 4. Disconnect the camera and microphone module cable from the module. 5. Remove the camera and microphone module from the display assembly. Installing the Camera and Microphone Modul...

Removing the LED Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) batteryb) display bezelc) display panel 3. Remove the screw that secures the LED board to the display assembly. 4. Remove the LED-board support plate from the display assembly. 5. Disconnect the LED-...

7. Remove the screw that secures the right display-hinge wall to the display assembly. 8. Slide and remove the right display-hinge wall out of the display assembly. Installing the Display-Hinge Walls 1. Place both the display-hinge walls on the panel. 2. Insert the antenna cables into their opening ...

i) keyboardj) keyboard trimk) base coverl) optical drivem) hard driven) batteryo) ExpressCardp) SD card 5. Follow the procedures in After Working Inside Your Computer. Removing the Display Hinges 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove:a) SD cardb) ExpressCardc) ba...

Installing the LVDS and Camera Cable 1. Route the LVDS and camera cable on the display assembly. 2. Fix the adhesive the tape to secure the cable. 3. Connect the LVDS and camera cable to the camera and microphone module. 4. Install:a) display hinge wallsb) power LED boardc) display paneld) display b...

3 Docking Port Information The docking port is used for connecting the laptop to a docking station (optional). 1. Docking Port 55

4 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance an...

Keys Navigation <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For the standard graphics browser only. <Esc> Moves...

Table 9. Virtualization Support Option Description Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization technology. • Enable Intel Virtualization Technology - Default Setting. VT for Direct I/O ...

3. If you have your computer's Service Tag or Express Service Code: NOTE: For desktops, the service tag label is available on the front of your computer. NOTE: For notebooks, the service tag label is available on the bottom of your computer. a) Enter the Service Tag or Express Service Code and click...

Use the following guidelines to assign the system password: – A password can have up to 32 characters.– The password can contain the numbers 0 through 9.– Only lower case letters are valid, upper case letters are not allowed.– Only the following special characters are allowed: space, (”), (+), (,), ...

5 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the pro...

Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. The device status LEDs are usually located either on the top or left side of the keyboard. They are used to display the storage, battery and wireless devices connectivity and activity. Apart ...

6 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about you...

7 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, ...