Dell E6320- Manuals
Dell E6320– User Manual, Manual in PDF format online.
Manuals:
User Manual Dell E6320
Summary
Contents Notes, Cautions, and Warnings..................................................................2 1 Working on Your Computer......................................................................9 Before Working Inside Your Computer ...............................................................
Working on Your Computer 1 Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions ex...
NOTE: The color of your computer and certain components may appear differentlythan shown in this document. To avoid damaging your computer, perform the following steps before you begin working inside the computer. 1. Ensure that your work surface is flat and clean to prevent the computer cover from ...
ExpressCard 2 Removing The ExpressCard 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the ExpressCard to release it from the computer. 3. Slide the ExpressCard out of the computer. Installing the ExpressCard 1. Slide the ExpressCard into its slot until it clicks into pl...
Battery 4 Removing The Battery 1. Follow the procedures in Before Working On Your Computer . 2. Slide the battery latches to unlock the battery. 3. Slide the battery out and remove it from the computer. Installing The Battery 1. Slide the battery into its slot until it clicks into place.2. Follow th...
Subscriber Identity Module (SIM)Card 5 Removing The Subscriber Identity Module (SIM) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Press in on the SIM card to release it from the computer. 4. Slide the SIM card out from the computer. 19
Installing the Subscriber Identity Module (SIM) Card 1. Slide the SIM card into its compartment.2. Install the battery . 3. Follow the procedures in After Working Inside Your Computer . 20
Hard Drive 6 Removing The Hard Drive 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the screws that secure the hard drive to the computer. 4. Slide and remove the hard drive out of the computer. 5. Remove the screw that secures the hard-drive caddy to...
6. Pull and remove the hard-drive caddy away from the hard drive. Installing The Hard Drive 1. Attach the hard-drive caddy to the hard drive.2. Tighten the screws to secure the hard-drive caddy to the hard drive.3. Slide the hard drive into the computer.4. Replace and tighten the screws that secure ...
Optical Drive 7 Removing The Optical Drive 1. Follow the procedures in Before Working On Your Computer . 2. Press and release the optical drive latch. 3. Pull the optical drive out of the computer. 4. Pull the optical drive door from one side to release it. 5. Pull the other side of the optical driv...
9. Remove the drive latch bracket from the optical drive. Installing The Optical Drive 1. Insert the drive latch bracket into the optical drive.2. Tighten the screws to secure the drive latch bracket to the optical drive.3. Insert the drive latch into the optical drive.4. Tighten the screw to secure...
Base Cover 8 Removing The Base Cover 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) Card . 4. Remove the screws that secure the base cover to the computer. 5. Lift the base cover up and away from the computer. 27
Installing The Base Cover 1. Place the base cover to align the screw holes correctly with the computer.2. Replace and tighten the screws to secure the base cover to the computer.3. Install the Secure Digital (SD) Card . 4. Follow the procedures in After Working Inside Your Computer . 28
Memory Card 9 Removing The Memory 1. Follow the procedures in Before Working On Your Computer 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Pry the retention clips away from the memory module until it pops up. 6. Remove the memory module from the comp...
Installing The Memory 1. Insert the memory module into the memory slot.2. Press the clips to secure the memory module to the system board.3. Install the base cover . 4. Install the Secure Digital (SD) card . 5. Install the battery 6. Follow the procedures in After Working Inside Your Computer . 30
Coin-Cell Battery 10 Removing The Coin-Cell Battery 1. Follow the procedures in Before Working on Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the coin-cell battery cable from the system board. 6. Release and remove the coi...
Installing The Coin-Cell Battery 1. Place the coin-cell battery in its location.2. Connect the coin-cell battery cable to the system board.3. Install the base cover . 4. Install the Secure Digital (SD) card . 5. Install the battery 6. Follow the procedures in After working inside your computer . 32
Wireless Local Area Network(WLAN) Card 11 Removing The Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the antenna cables from the WLAN card...
Installing The Wireless Local Area Network (WLAN) Card 1. Insert the WLAN card into its connector at a 45–degree angle.2. Replace and tighten the screw that secures the WLAN card to the computer. 3. Connect the antenna cables according to the color code on the WLAN card. 4. Install the base cover . ...
Wireless Wide Area Network(WWAN) Card 12 Removing The Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the antenna cables from the WWAN card. ...
Installing The Wireless Wide Area Network (WWAN) Card 1. Insert the WWAN card into its connector at a 45–degree angle.2. Replace and tighten the screw to secure the WWAN card to the computer.3. Connect the antenna cables according to the color code on the WLAN card. 4. Install the base cover . 5. In...
Keyboard Trim 13 Removing The Keyboard Trim 1. Follow the procedures in Before Working On Your Computer . 2. Using a plastic scribe, pry under the keyboard trim to release it from the computer. 3. Lift the keyboard trim to release the tabs and remove it from the computer. 37
Installing The Keyboard Trim 1. Align the keyboard trim with the keyboard and snap it into place.2. Follow the procedures in After Working Inside Your Computer . 38
Keyboard 14 Removing The Keyboard 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the keyboard trim . 4. Remove the screws that secure the keyboard to the computer. 5. Remove the screws that secure the keyboard to the palmrest assembly. 6. Flip the key...
9. Remove the tape securing the keyboard cable from the keyboard. 10. Disconnect and remove the keyboard cable from the keyboard. Installing The Keyboard 1. Connect the keyboard cable and secure it to the keyboard using the tape. 2. Connect the keyboard cable to its connector on the system board. 3....
Palm Rest 15 Removing The Palmrest Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the key...
Installing The Palmrest Assembly 1. Align the palmrest assembly with the computer and snap it into place.2. Replace and tighten the screws to secure the palmrest assembly to the system board. 3. Connect the following cables to the system board: • LED board• touchpad• bluetooth• contactless smart car...
Bluetooth Card 16 Removing The Bluetooth Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the k...
13. Release and remove the bluetooth cable from the bluetooth card. Installing The Bluetooth Card 1. Connect the bluetooth cable to the bluetooth card.2. Place the bluetooth card on the palmrest assembly.3. Replace and tighten the screw to secure the bluetooth card to the palmrest assembly. 4. Insta...
LED Board 17 Removing The LED Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard tr...
Installing The LED Board 1. Align the LED board on the palmrest.2. Replace and tighten the screw that secure the LED board to the palmrest.3. Route the LED board cable to its original position.4. Install the palmrest assembly . 5. Install the keyboard . 6. Install the keyboard trim . 7. Install the ...
Smart Card Reader 18 Removing The Smart Card Reader 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove...
Installing The Smart Card Reader 1. Place the smart card reader to its original position on the computer.2. Replace and tighten the screws to secure the smart card reader to the computer. 3. Connect the smart card reader cable to the system board.4. Replace and tighten the screws to secure the palmr...
Media Board 19 Removing The Media Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboar...
Installing The Media Board 1. Align the media board to its original position on the computer.2. Replace and tighten the screws to secure the media board to the computer.3. Connect the media board cable to the system board.4. Install the palmrest assembly . 5. Install the keyboard . 6. Install the ke...
Display Hinges 20 Removing The Display Hinge Covers 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove...
Installing The Display Hinge Covers 1. Place the display hinges in the appropriate positions.2. Replace and tighten the screws to secure the display hinge covers to the computer. 3. Install the palmrest assembly . 4. Install the keyboard . 5. Install the keyboard trim . 6. Install the hard drive . 7...
Display Assembly 21 Removing The Display Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove t...
Installing The Display Assembly 1. Align the display assembly into its original position on the computer. 2. Replace and tighten the screw to secure the display assembly to the computer. 3. Replace and connect the display cable to the system board. 4. Align the display cable bracket to its original ...
System Board 22 Removing The System Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the Expres...
24. Remove the TAA board from the system. Installing The System Board 1. Place the TAA board to its original position. 72
Heat Sink 23 Removing The Heat-Sink Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the Exp...
Installing The Heat-Sink Assembly 1. Align the heat-sink assembly to its original position on the system board.2. Tighten the screws to secure the heat-sink assembly to the system board.3. Connect the heat-sink cable to the system board.4. Install the heat-sink assembly . 5. Install the display asse...
Input/Output Panel 24 Removing The Input/Output Panel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remov...
Installing The Input/Output Panel 1. Replace the I/O panel in the computer2. Tighten the screw securing the I/O panel to the computer.3. Install the display assembly . 4. Install the display hinge covers . 5. Install the palmrest assembly . 6. Install the keyboard . 7. Install the keyboard trim . 8....
Speaker 25 Removing The Speakers 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the base cover . 4. Remove the Secure Digital (SD) card . 5. Remove the optical drive . 6. Remove the subscriber identity module (SIM) card . 7. Remove the ExpressCard . 8...
Installing The Speakers 1. Replace the speakers to their original position in the computer. 2. Tighten the screws to secure the speakers to the computer. 3. Route and connect the speaker cable. 4. Install the system board 5. Install the display assembly . 6. Install the display hinge covers . 7. Ins...
DC-In Port 26 Removing The DC-In Port 1. Follow the procedures in Before Working on Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCar...
Installing The DC-In Port 1. Replace the DC-In port to its original position in the computer. 2. Replace the DC-In bracket to its original position in the computer. 3. Tighten the screw to secure the DC-In bracket to the computer. 4. Install the system board 5. Install the display assembly . 6. Inst...
Display Bezel 27 Removing The Display Bezel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Starting from the bottom, pry the bezel from inside the display assembly. 4. Remove the bezel from the display assembly. 91
Installing The Display Bezel 1. Place the display bezel onto the display assembly.2. Work along to the top and bottom edges of the display bezel.3. Press the left and right edges of the display bezel.4. Install the battery . 5. Follow the procedures in After Working Inside Your Computer . 92
Display Panel 28 Removing The Display Panel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the display bezel 4. Remove the screws that secures the display panel to the display assembly. 5. Flip the display panel over. 93
6. Disconnect the Low-Voltage Differential Signaling (LVDS) cable from the display panel. 7. Remove the display panel from the display assembly. Installing The Display Panel 1. Align the display panel in its original position on the display assembly.2. Connect the Low-Voltage Differential Signaling ...
Camera 29 Removing The Camera 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the display bezel . 4. Remove the display panel . 5. Disconnect the cable from the camera module. 6. Remove the screw that secures the camera and microphone to the display as...
7. Remove the camera from the display assembly. Installing The Camera 1. Place the camera module to its original position in the display assembly. 2. Tighten the screw to secure the camera to the display assembly. 3. Connect the camera cable to the camera. 4. Install the display panel . 5. Install t...
Specifications 30 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only thoserequired by law to ship with your computer. For more information regarding theconfiguration of your computer, click Start → Help and Support and select the option to view informa...
System Setup 31 Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password.• read the current amount of memory or set the type of hard drive inst...
Diagnostics 32 Device Status Lights Turns on when you turn on the computer and blinks when the computer is in apower management mode. Turns on when the computer reads or writes data. Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. Battery ...
Manual Dell E6320
Summary
Contents Notes, Cautions, and Warnings..................................................................2 บทที่ 1: การทำงานกับสวนประกอบภายในของคอมพิวเตอร ..................................................9 การดำเนินการกับสวนประกอบภายในคอมพิวเตอร .....................................................
1 การทำงานกับสวนประกอบภายในของคอมพิวเตอร การดำเนินการกับสวนประกอบภายในคอมพิวเตอร ปฏิบัติตามคำแนะนำตอไปนี้เพื่อปกปองคอมพิวเตอรจากความเสียหาย และเพื่อความปลอดภัยของตัวคุณเอง ขั้นตอนที่แจงในเอกสารนี้ แนะนำภายใตเงื่อนไขดังตอไปนี้ ยกเวนมีระบุไวเปนอยางอื่น : • คุณไดปฏิบัติตามขั้นตอนในหัวขอ...
ขอควรระวัง : ปลดสายเครือขายโดยถอดสายออกจากคอมพิวเตอรกอน แลวจึงถอดสายจากอุปกรณเครือขาย 4. ถอดสายโทรศัพทหรือสายเครือขายทั้งหมดออกจากคอมพิวเตอร 5. ถอดปลั๊กคอมพิวเตอรและอุปกรณตาง ๆ ทั้งหมดที่ตออยูกับคอมพิวเตอรออกจากเตารับไฟฟา 6. ปดฝาจอแสดงผลและพลิกคอมพิวเตอรคว่ำลงบนพื้นผิวเรียบ หมายเ...
– สำหรับ Windows XP: คลิก Start → Turn Off Computer → Turn Off คอมพิวเตอรจะปดทำงานหลังจากระบบปฏิบัติ การปดการทำงานเสร็จสิ้น 2. ตรวจสอบวาคอมพิวเตอรและอุปกรณทั้งหมดที่ตอพวงปดทำงานแลว หากคอมพิวเตอรและอุปกรณตอพวงไมปดการทำงาน อัตโนมัติเมื่อปดระบบปฏิบัติการ ใหกดปุมเปดปดเครื่องคางไวป...
2 ExpressCard Removing The ExpressCard 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the ExpressCard to release it from the computer. 3. Slide the ExpressCard out of the computer. 13
Related Links Installing the ExpressCard Installing the ExpressCard 1. Slide the ExpressCard into its slot until it clicks into place. 2. Follow the procedures in After working inside your computer . Related Links Removing The ExpressCard 14
3 การด SD Removing The Secure Digital (SD) Card 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the SD card to release it from the computer. 3. Slide the SD card out of the computer. 15
4 แบตเตอรี่ Removing The Battery 1. Follow the procedures in Before Working On Your Computer . 2. Slide the battery latches to unlock the battery. 3. Slide the battery out and remove it from the computer. 17
Related Links Installing The Battery Installing The Battery 1. Slide the battery into its slot until it clicks into place. 2. Follow the procedures in After working inside your computer . Related Links Removing The Battery 18
5 Subscriber Identity Module (SIM) Card Removing The Subscriber Identity Module (SIM) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Press in on the SIM card to release it from the computer. 4. Slide the SIM card out from the computer. 19
Related Links Installing the Subscriber Identity Module (SIM) Card Installing the Subscriber Identity Module (SIM) Card 1. Slide the SIM card into its compartment. 2. Install the battery . 3. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Subscriber Identity...
6 ฮารดไดรฟ Removing The Hard Drive 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the screws that secure the hard drive to the computer. 4. Slide and remove the hard drive out of the computer. 21
Related Links Installing The Hard Drive Installing The Hard Drive 1. Attach the hard-drive caddy to the hard drive. 2. Tighten the screws to secure the hard-drive caddy to the hard drive. 3. Slide the hard drive into the computer. 4. Replace and tighten the screws that secure the hard drive to the c...
7 ออพติคอลไดรฟ Removing The Optical Drive 1. Follow the procedures in Before Working On Your Computer . 2. Press and release the optical drive latch. 3. Pull the optical drive out of the computer. 4. Pull the optical drive door from one side to release it. 25
9. Remove the drive latch bracket from the optical drive. Related Links Installing The Optical Drive Installing The Optical Drive 1. Insert the drive latch bracket into the optical drive. 2. Tighten the screws to secure the drive latch bracket to the optical drive. 3. Insert the drive latch into the...
8 Base Cover Removing The Base Cover 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) Card . 4. Remove the screws that secure the base cover to the computer. 5. Lift the base cover up and away from the computer. 31
Related Links Installing The Base Cover Installing The Base Cover 1. Place the base cover to align the screw holes correctly with the computer. 2. Replace and tighten the screws to secure the base cover to the computer. 3. Install the Secure Digital (SD) Card . 4. Follow the procedures in After Work...
9 เมมโมรี่การด Removing The Memory 1. Follow the procedures in Before Working On Your Computer 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Pry the retention clips away from the memory module until it pops up. 6. Remove the memory module from the co...
Related Links Installing The Memory Installing The Memory 1. Insert the memory module into the memory slot. 2. Press the clips to secure the memory module to the system board. 3. Install the base cover . 4. Install the Secure Digital (SD) card . 5. Install the battery 6. Follow the procedures in Aft...
10 ถานกระดุม Removing The Coin-Cell Battery 1. Follow the procedures in Before Working on Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the coin-cell battery cable from the system board. 6. Release and remove the coin-cell ...
Related Links Installing The Coin-Cell Battery Installing The Coin-Cell Battery 1. Place the coin-cell battery in its location. 2. Connect the coin-cell battery cable to the system board. 3. Install the base cover . 4. Install the Secure Digital (SD) card . 5. Install the battery 6. Follow the proce...
11 การดเครือขายภายในไรสาย (WLAN) Removing The Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the antenna cables from the WLAN card. 6. R...
7. Remove the WLAN card from its slot on the system board. Related Links Installing The Wireless Local Area Network (WLAN) Card Installing The Wireless Local Area Network (WLAN) Card 1. Insert the WLAN card into its connector at a 45–degree angle. 2. Replace and tighten the screw that secures the WL...
12 การดเครือขายวงกวางไรสาย (WWAN) Removing The Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the antenna cables from the WWAN card. 6. ...
7. Remove the WWAN card from the computer. Related Links Installing The Wireless Wide Area Network (WWAN) Card Installing The Wireless Wide Area Network (WWAN) Card 1. Insert the WWAN card into its connector at a 45–degree angle. 2. Replace and tighten the screw to secure the WWAN card to the comput...
13 Keyboard Trim Removing The Keyboard Trim 1. Follow the procedures in Before Working On Your Computer . 2. Using a plastic scribe, pry under the keyboard trim to release it from the computer. 3. Lift the keyboard trim to release the tabs and remove it from the computer. 45
Related Links Installing The Keyboard Trim Installing The Keyboard Trim 1. Align the keyboard trim with the keyboard and snap it into place. 2. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Keyboard Trim 46
14 แปนพิมพ Removing The Keyboard 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the keyboard trim . 4. Remove the screws that secure the keyboard to the computer. 5. Remove the screws that secure the keyboard to the palmrest assembly. 47
10. Disconnect and remove the keyboard cable from the keyboard. Related Links Installing The Keyboard Installing The Keyboard 1. Connect the keyboard cable and secure it to the keyboard using the tape. 2. Connect the keyboard cable to its connector on the system board. 3. Turn the keyboard over and ...
15 ที่พักมือ Removing The Palmrest Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the key...
Related Links Installing The Palmrest Assembly Installing The Palmrest Assembly 1. Align the palmrest assembly with the computer and snap it into place. 2. Replace and tighten the screws to secure the palmrest assembly to the system board. 3. Connect the following cables to the system board: – LED b...
16 การด Bluetooth Removing The Bluetooth Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the ...
13. Release and remove the bluetooth cable from the bluetooth card. Related Links Installing The Bluetooth Card Installing The Bluetooth Card 1. Connect the bluetooth cable to the bluetooth card. 2. Place the bluetooth card on the palmrest assembly. 3. Replace and tighten the screw to secure the blu...
17 แผง LED Removing The LED Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim...
13. Remove the LED board from the palm rest assembly. Related Links Installing The LED Board Installing The LED Board 1. Align the LED board on the palmrest. 2. Replace and tighten the screw that secure the LED board to the palmrest. 3. Route the LED board cable to its original position. 62
18 Smart Card Reader Removing The Smart Card Reader 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove...
13. Lift and remove the smart card reader from the computer. Related Links Installing The Smart Card Reader Installing The Smart Card Reader 1. Place the smart card reader to its original position on the computer. 2. Replace and tighten the screws to secure the smart card reader to the computer. 3. ...
19 Media Board Removing The Media Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboar...
13. Remove the media board from the computer. Related Links Installing The Media Board Installing The Media Board 1. Align the media board to its original position on the computer. 2. Replace and tighten the screws to secure the media board to the computer. 3. Connect the media board cable to the sy...
20 Display Hinges Removing The Display Hinge Covers 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove...
Related Links Installing The Display Hinge Covers Installing The Display Hinge Covers 1. Place the display hinges in the appropriate positions. 2. Replace and tighten the screws to secure the display hinge covers to the computer. 3. Install the palmrest assembly . 4. Install the keyboard . 5. Instal...
21 ชุดจอแสดงผล Removing The Display Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the ke...
18. Remove the screw that secures the display assembly to the computer. 19. Remove the display assembly from the computer. Related Links Installing The Display Assembly Installing The Display Assembly 1. Align the display assembly into its original position on the computer. 2. Replace and tighten th...
22 เมนบอรด Removing The System Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCar...
Related Links Installing The System Board Installing The System Board 1. Place the TAA board to its original position. NOTE: Steps 1 and 2 are applicable for computers that shipped in the United States of America. 2. Replace and tighten the screw to secure the TAA board to the computer. 3. Align the...
23 ฮีทซิงค Removing The Heat-Sink Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the Expr...
Related Links Installing The Heat-Sink Assembly Installing The Heat-Sink Assembly 1. Align the heat-sink assembly to its original position on the system board. 2. Tighten the screws to secure the heat-sink assembly to the system board. 3. Connect the heat-sink cable to the system board. 4. Install t...
24 แผง I/O Removing The Input/Output Panel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the Expre...
19. Remove the I/O panel from the computer. Related Links Installing The Input/Output Panel Installing The Input/Output Panel 1. Replace the I/O panel in the computer 2. Tighten the screw securing the I/O panel to the computer. 3. Install the display assembly . 4. Install the display hinge covers . ...
25 ลำโพง Removing The Speakers 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the base cover . 4. Remove the Secure Digital (SD) card . 5. Remove the optical drive . 6. Remove the subscriber identity module (SIM) card . 7. Remove the ExpressCard . 8. ...
Related Links Installing The Speakers Installing The Speakers 1. Replace the speakers to their original position in the computer. 2. Tighten the screws to secure the speakers to the computer. 3. Route and connect the speaker cable. 4. Install the system board 5. Install the display assembly . 6. Ins...
26 พอรต DC-In Removing The DC-In Port 1. Follow the procedures in Before Working on Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCa...
Related Links Installing The DC-In Port Installing The DC-In Port 1. Replace the DC-In port to its original position in the computer. 2. Replace the DC-In bracket to its original position in the computer. 3. Tighten the screw to secure the DC-In bracket to the computer. 4. Install the system board 5...
27 กรอบจอแสดงผล Removing The Display Bezel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Starting from the bottom, pry the bezel from inside the display assembly. 4. Remove the bezel from the display assembly. 103
Related Links Installing The Display Bezel Installing The Display Bezel 1. Place the display bezel onto the display assembly. 2. Work along to the top and bottom edges of the display bezel. 3. Press the left and right edges of the display bezel. 4. Install the battery . 5. Follow the procedures in A...
28 แผงจอแสดงผล Removing The Display Panel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the display bezel 4. Remove the screws that secures the display panel to the display assembly. 5. Flip the display panel over. 105
Related Links Installing The Display Panel Installing The Display Panel 1. Align the display panel in its original position on the display assembly. 2. Connect the Low-Voltage Differential Signaling (LVDS) cable to the display panel. 3. Tighten the screws to secure the display panel to the display a...
29 กลอง Removing The Camera 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the display bezel . 4. Remove the display panel . 5. Disconnect the cable from the camera module. 6. Remove the screw that secures the camera and microphone to the display ass...
7. Remove the camera from the display assembly. Related Links Installing The Camera Installing The Camera 1. Place the camera module to its original position in the display assembly. 2. Tighten the screw to secure the camera to the display assembly. 3. Connect the camera cable to the camera. 4. Inst...
30 รายละเอียดทางเทคนิค Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view ...
31 การตั้งคาระบบ Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password. • read the current amount of memory or set the type of hard drive i...
32 การวินิจฉัยระบบ Device Status Lights Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. Bat...
Dell Manuals
-
Dell 04YJJ6A00
User Manual
-
Dell 04YJJ6A00
Manual
-
Dell 10 Pro
User Manual
-
Dell 10
Manual
-
Dell 1000
User Manual
-
Dell 1000
Manual
-
Dell 1014
User Manual
-
Dell 1000W
User Manual
-
Dell 1000W
Manual
-
Dell 0JH552A01
User Manual
-
Dell 10g
User Manual
-
Dell 1100
User Manual
-
Dell 1100
Manual
-
Dell 11
User Manual
-
Dell 11
Manual
-
Dell 11 Pro
User Manual
-
Dell 110T
User Manual
-
Dell 110T DLT1 Drive
User Manual
-
Dell 1100 Laser Mono Printer
User Manual
-
Dell 1100MP
User Manual