Dell E2210HF - Manuals

  The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed: Activate the computer and monitor to gain access to the OSD . Pin Assignments 15-pin D-Sub connector DVI connector VESA Modes Horizo...

Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monito...

Resolution Specifications Electrical Specifications Model number Dell E2010H/E2210H/E2310H Flat Panel Monitor Scan range l Horizontal l Vertical   30 kHz to 83 kHz (automatic) 50 Hz to 75 Hz (automatic) Maximum preset resolution 1600 x 900 at 60 Hz (For E2010H) 1920 x 1080 at 60 Hz (For E2210H/E2310...

  LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.When the pixel remains permane...

  Maintenance Guidelines Caring for Your Monitor For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or ...

Back to Contents Page   Appendix Dell™  E2010H/E2210H/E2310H Flat Panel Monitor User's Guide   Safety Instructions   FCC Notice (U.S. Only) and Other Regulatory Information   Contacting Dell      CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide ....

Back to Contents Page Setting Up Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor  If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com,  enter your service tag, and download the latest driver for your graphics card.  2. After insta...

Back to Contents Page Setting Up Your Monitor Dell™  E2010H/E2210H/E2310H Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card 1. Right-click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced . 4. Identify your graphics controller...

Back to Contents Page   Operating the Monitor Dell™  E2010H/E2210H/E2310H Flat Panel Monitor User's Guide    Using the Front Panel Controls    Using the On-Screen Display (OSD) Menu    Setting the Maximum Resolution    Using the Dell Soundbar (Optional)    Using the Tilt    Power On the Monitor Pres...

Using the On-Screen Display (OSD) Menu     Accessing the Menu Syste The table below provides a list of all the OSD menu options and their functions.   1. Press the button to open the OSD menu and display the main menu.   Main Menu 2. Press the and buttons to toggle between options in the Menu. As yo...

OSD Warning Messages       Back P r e s s to go back to the main menu. When the monitor does not support a particular resolution mode you will see the following message: E2010H: E2210H/E2310H:   This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Se...

        See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: 1. Right-click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1600 x 900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H...

Tilt With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle.   Back to Contents Page NOTE: The stand is detached when the monitor is shipped from the factory.

Back to Contents Page   Setting Up the Monitor Dell™  E2010H/E2210H/E2310H Flat Panel Monitor User's Guide    Attaching the Stand    Connecting Your Monitor    Attaching the Dell Soundbar (Optional)    Removing the Stand Base     Wall mounting (Optional)     Attaching the Stand   Connecting Your Mon...

Attaching the Dell Soundbar(Optional) To attach the Soundbar: Removing the Stand   To remove the stand: 1. P ress and hold the stand release button. 2. Lift the stand up and away from the monitor . CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may va...

Back to Contents Page   Troubleshooting Dell™  E2010H/E2210H/E2310H Flat Panel Monitor    Self-Test    Common Problems    Product Specific Problems     Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and compu...

  Product Specific Problems Back to Contents Page Settings OSD if the Color Management is turned off. l Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD. l Run the built-in diagnostics. Image retention from a static image left on the monitor for a  long period of time Fain...