Dell E157FPT- Manuals

Back to Contents Page   Appendix Dell™ E157FPT Touch Screen Monitor Contents    Warranty Information    CAUTION:General Safety Instructions    CAUTION: Monitor Safety Instructions    Contacting Dell    Regulatory Notices    Your Monitor Setup Guide   Warranty Information   U.S. Terms and Conditions ...

contract you purchased. Dell is not obligated to provide service or support you purchase through a third party and not Dell.   9. Limitation of Liability. DELL DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH HEREIN, INCLUDING BUT NOT LIMITED TO ANY LIABILITY FOR PRODUCT NOT BEING AVAILABLE F...

l   The limited warranty for Power Adapters purchased independent of a system is one year. Power Adapters purchased with a system are covered by the system limited warranty. l   Your PERC 5 battery may provide up to 72 hours of controller cache memory backup power when new. Under the 1-year limited ...

During the remaining years: For the remaining period of the limited warranty, we will replace any defective part with new or refurbished parts, if we agree that it needs to be replaced. When you contact us, we will require a valid credit card number at the time you request a replacement part, but we...

l   Ship back all products you are seeking to return to Dell. At Dell's discretion, credit for partial returns may be less than invoice or individual component prices due to bundled or promotional pricing and any unadvertised discounts or concessions. l   Return the products in their original packag...

l   If your equipment does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.   SAFETY: When Working Inside Your Device Do not attempt to service the equipment yourself, except as ...

  Connecting the AC Plug Adapter (Japan Only)     1. Connect the metal ground connector to the grounding source on the outlet: a.   Loosen the grounding source. b.   Slide the metal ground connector behind the grounding source, and then tighten the grounding source.   2. Connect the AC power cable t...

  Regulatory Notices   FCC Notice (U.S. Only)   FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception. This equipment has b...

These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, w...

Back to Contents Page   Setting Up Your Monitor Dell™ E157FPT Touch Screen Monitor Contents    Connecting Your Monitor    Using the OSD    O n-Screen Menu/Display (OSD)    Special OSD Functions    OSD Warning Messages    Setting the Optimal Resolution   Connecting Your Monitor     1. Turn off your c...

7. Replace the cable cover.   8. Plug the power cables of your computer and your display into a nearby outlet. Your monitor is equipped with an automatic power supply for a voltage range from 100 to 240 Volt at a frequency of 50/60 Hz. Be sure that your local power is within the supported range. If ...

  Accessing the Menu System   1. With the menu off, press the 'MENU' button to open the OSD system and display the main features menu.   Function   Adjustment Method   Auto Adjustment While the OSD menu is not showing, use this button to activate automatic setup and adjustment. The following dialog ...

  Special OSD Functions l   OSD LOCK and UNLOCK l   POWER LOCK and UNLOCK l   Automatic Save     AUTO ADJUST Pressing "Select" will execute the function.     Auto Adjustment will take only a few seconds. The OSD Menu will automatically disappear after adjustment is complete.   OSD LANGUAGE T...

  Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu or exit the OSD, the monitor automatically saves any adjustments you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.   OSD Warning Mess...

Back to Contents Page   Solving Problems Dell™ E157FPT Touch Screen Monitor Contents    General Problems    Touch screen Problems   General Problems   Touch screen Problems Back to Contents Page     Problem   Suggestion The monitor does not respond after you turn on the system. Check that the monito...

Dell™ E157FPT Touch Screen Monitor User's Guide Information in this document is subject to change without notice. © 2006 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. T r a d e m a r k s u s e d i n t h i s t e...

Back to Contents Page   Using the Touch Screen Software Dell™ E157FPT Touch Screen Monitor Contents    About Your Touch Screen Software    Installing Touch Screen Software    Uninstalling Touch Screen Software    Using the Touch Screen Control Panel    Advanced Settings    Dell Right Mouse Button To...

  7. Click Next .   8. Review and accept the License Agreement. The driver files are installed. Following installation, the Setup Complete screen appears.   9. To calibrate the monitor, select Calibrate Dell Touch Screen monitors , click Finish . You may choose to run the calibrate program at a late...

  5. Review and accept the License Agreement. The program will appear to proceed as a single/multiple serial controller installation but USB files will also install. The driver files will install. When the Setup Complete screen appears, you may choose to run calibration (the Video Alignment program,...

  2. Locate the Dell entry, then click Change . The Dell Touchscreen Setup dialog appears.   3. Select Install Serial Touchscreen Drivers , click Next .   Adding USB Controllers If there are Dell USB devices already installed, plug the USB cable from the touchmonitor into the computer and run EloVA ...

  3. Locate the Dell entry, then click Remove .   4. Click Yes to confirm removal. You may see the following message when the Uninstall is complete: Some elements could not be removed. You should manually remove items related to the application. This is normal, as several files remain in use until y...

l   Show tool tray utility activates the Tool Tray utility in the Windows Task Bar. See Tool Tray for a complete description of this feature   Sound The Sound tab sends a single-frequency tone or "Beep" to the system speaker each time a valid touch occurs. The beep is enabled by default when...

  Screen Information l   Windows Monitor Number lists the monitor that corresponds to the "Windows Monitor" from the Windows Display Properties control panel. l   Touch screen Type: IntelliTouch. l   Installed On indicates USB or lists the Windows COM port that a serial touch screen is insta...

  Disable/Enable touch Disable Touch stops touch information from reaching Windows for this touch screen. This feature may also be activated from the Tool Tray utility. Disabling touch has no effect on the operation of the standard mouse.   Show right mouse button tool Show right mouse button tool l...

Typically, a right button action will activate a new dialog box for some function similar to mouse right button click. When that dialog box is touched, or any other touch on the touch monitor is made, this touch will be a left button event. Simultaneously, the mouse button shading in the RMBT will t...

When disabled through the Tool Tray, touches made on the touch screen are not buffered by the driver, and will not be sent from the driver to MouClass after the touch screen is re-enabled. After the touch screen has been disabled, the state of this segment of the Tool Tray menu changes from "Dis...