Dell E157FP- Manuals

    Power Management Modes If you have VESA's DPMS compliant display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If input from keyboard, mouse or other input devices is detected, the display will automatically "wake up". ...

Back to Contents Page Appendix Dell™ E157FP Flat Panel Monitor User's Guide FCC Notice (U.S. Only) CAUTION: Safety Instruction Contacting Dell FCC Notice (U.S. Only) FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with t...

l Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply. l Locate your monitor near an easily accessible electric outlet. l If your monitor does not operate normally - in particular, if there are any unusual sounds or sm...

Back to Contents Page Using the OSD DellT E157FP Flat Panel Monitor User's Guide Connecting Your Monitor Using the Front Panel Buttons Using the OSD Using the Dell™ Soundbar (Optional) Connecting Your Monitor 1. Turn off your computer and unplug its power cable. 2. Connect the blue (analog D-sub) di...

On Screen Menu/Display (OSD) Direct-Access Functions Using the OSD Accessing the Menu System 1. With the menu off, press the 'MENU' button to open the OSD system and display the main features menu. Brightness/Contrast Hot Key B C - and + buttons Use these buttons to adjust (decrease/increase ranges)...

Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustments you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved. Reset Functions Fac...

OSD Warning Messages A warning message may appear on the screen indicating that the monitor is out of sync. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See  Specifications  for...

Soundbar Attachment to the Monitor Back to Contents Page 1. Headphone connectors 2. Power indicator 3. Power/Volume control 1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Soundbar to the left un...

Back to Contents Page   Product Specific Problems DellT E157FP Flat Panel Monitor User's Guide    Monitor Specific Troubleshooting   Common Problems   Product Specific Problems   Monitor Specific Troubleshooting   Self-Test Feature Check (STFC) Your monitor provides a self-test feature that allows y...

Back to Contents Page   Using Your Monitor Stand DellT E157FP Flat Panel Monitor User's Guide Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1. Place the stand on a flat surface. 2. Fit the groove on the back of the monitor onto the two teeth of the ...

Tilt With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle. Removing the Stand After placing the monitor panel on a soft cloth or cushion, press and hold the LCD removal button, and then remove the stand. Back to Contents Page NOTE: To prevent scratches on the L...