Dell 9200- Manuals

6 | SuperMassive 9200 Package Contents SuperMassive 9200 Package Contents Before you begin the setup process, verify that your package contains the following items: 1. One Dell SonicWALL SuperMassive 9200 appliance 2. One Rack Mounting Kit 3. One serial CLI cable 4. One Ethernet cable 5. Two power c...

7 The Front Panel SonicWALL SuperMassive 9200 CONSOLE SDHC MGMT X19 X17 X16 X14 X12 X10 X8 X6 X4 1GE 1GE 10GE BYPASS STATUS X2 X0 X1 X3 X5 X7 X9 X11 X13 X15 X18 M0 ALARM TEST PWR 1 PWR 2 LCD Screen Control Buttons Console Port USB Ports (2) Reset Button LED Indicators X0-X7 (1 GE) Bypass Status Acce...

8 | The Back Panel The Back Panel Warning: Potential Hazard from Fan This manual contains specific warning and caution statements where they apply. Please read the Safety Instructions before use! See Product Safety and Regulatory Information, page 57 . Expansion Bay Fans (2) Power Supplies (2) For D...

11 Configuring the Appliance In this Section: This section provides an overview of available WAN types, a section to record configuration information, and initial setup information and procedures. • Determining the WAN Type, page 12 • System Requirements, page 12 • Recording Configuration Informatio...

12 | Determining the WAN Type Determining the WAN Type Before configuring your Dell SonicWALL SuperMassive 9200 appliance, you will need to determine the type of WAN connection your setup will use. Dell SonicWALL supports the following types: • Static —Configures the appliance for a network that use...

Recording Configuration Information | 13 Recording Configuration Information Use this section to record your configuration information. Be sure to keep for future reference. The default MGMT interface IP address is 192.168.1.254. Registration Information Networking Information Administrator Informat...

14 | Initial Setup Initial Setup The diagram below illustrates how to connect your management computer to the Dell SonicWALL SuperMassive 9200 appliance for initial setup. MGMT Dell SonicWALL Appliance Management Computer Ethernet SonicWALL SuperMassive 9200 CONSOLE SDHC MGMT X19 X17 X16 X14 X12 X10...

Initial Setup | 15 The following sections provide initial configuration information and instructions for connecting your Dell SonicWALL SuperMassive 9200 appliance for initial setup. • Connecting the MGMT Port, page 15 • Applying Power to the SuperMassive 9200, page 15 • SuperMassive 9200 LED Activi...

16 | Initial Setup Using the Setup Wizard When you are ready to begin initial setup, configure your management computer with a static IP address on the 192.168.1.0/24 subnet, such as 192.168.1.20. This allows your computer to connect to SonicOS via the MGMT interface. Note: Be sure to disable pop-up...

Connecting to the Internet | 17 Connecting to the Internet After initial setup is complete, connect the LAN and WAN interfaces for access to external networks or the Internet. You cannot reach the Internet or other WAN destinations while connected to the MGMT interface. For Internet access, connect ...

18 | Connecting to the Internet Internet Access The diagram below illustrates how to connect your computer to the Dell SonicWALL SuperMassive 9200 appliance for Internet access. Dell SonicWALL Appliance 120V AC (U.S.) SonicWALL SuperMassive 9200 CONSOLE SDHC MGMT X19 X17 X16 X14 X12 X10 X8 X6 X4 1GE...

Troubleshooting Your Connections | 19 Troubleshooting Your Connections Use the suggestions in this section to troubleshoot your MGMT and LAN connections. Troubleshooting Your MGMT Connection If you cannot connect to the Dell SonicWALL SuperMassive 9200 or the Setup Wizard does not display, consider ...

22 | Using MySonicWALL Using MySonicWALL Dell SonicWALL requires a MySonicWALL account prior to configuring your appliance. If you already have a MySonicWALL account, you can continue to Registration Overview, page 23 . MySonicWALL is used during registration of your Dell SonicWALL appliance and to ...

Registration Overview | 23 Registration Overview Although there are several ways to register your new Dell SonicWALL appliance, Dell SonicWALL recommends registering your appliance through the SonicOS Management Interface. This section describes how to register and license your appliance through Son...

24 | Alternative Registration Options Alternative Registration Options If you have registered your Dell SonicWALL appliance through the SonicOS interface, you can continue to Licensing Security Services, page 25 . Although Dell SonicWALL strongly recommends registering your appliance using the Sonic...

Licensing Security Services | 25 Licensing Security Services To license a security service, complete one of the following from the Service Management page: • Free Trial of Service —Click the Try icon in the Action column for the security service you wish to try for a 30-day free trial. The free tria...

26 | Activating & Managing Licenses Using MySonicWALL Activating & Managing Licenses Using MySonicWALL If you registered your appliance through SonicOS, all licensed services are already activated. You can continue to Upgrading Firmware, page 27 . If you purchased a service subscription or u...

Upgrading Firmware | 27 Upgrading Firmware Dell SonicWALL recommends that you run the latest available firmware on your security appliance. You will need to upgrade the factory-installed firmware to the latest version available on MySonicWALL. The following procedures are for upgrading an existing S...

28 | Upgrading Firmware Obtaining the Latest Firmware To obtain a new SonicOS firmware image file for your Dell SonicWALL security appliance, perform the following steps: 1. In a browser on your management computer, log into your MySonicWALL account at <http://www.mysonicwall.com> . 2. In MySo...

Upgrading Firmware | 29 Using SafeMode to Upgrade Firmware If you are unable to connect to the SonicOS management interface, you can restart the security appliance in SafeMode. The SafeMode feature allows you to recover quickly from uncertain configuration states with a simplified management interfa...

31 Deployment Scenarios In this Section: This section provides configuration overviews, as well as deployment scenarios for your Dell SonicWALL SuperMassive 9200. • Advanced Deployment Scenarios, page 32 • Configuring NAT Mode Gateway, page 36 • Configuring a Stateful HA Pair, page 37 • Configuring ...

32 | Advanced Deployment Scenarios Advanced Deployment Scenarios Select a deployment scenario that best fits your network scheme. Reference the table below and the diagrams on the following pages for help in choosing a scenario. Current Gateway Configuration New Gateway Configuration Use Scenario No...

Advanced Deployment Scenarios | 33 Scenario A: NAT Mode Gateway For new network installations or installations where the SuperMassive 9200 is replacing the existing network gateway. In this scenario, the SuperMassive 9200 is configured in NAT mode to operate as a single network gateway. Two Internet...

34 | Advanced Deployment Scenarios Scenario B: Stateful HA Pair For network installations with two Dell SonicWALL SuperMassive 9200 appliances configured as a stateful synchronized pair for redundant High Availability (HA) networking. In this scenario, one SuperMassive 9200 operates as the Primary g...

Advanced Deployment Scenarios | 35 Scenario C: L2 Bridge Mode For network installations where the Dell SonicWALL SuperMassive 9200 is running in tandem with an existing network gateway. In this scenario, the original gateway is maintained. The Dell SonicWALL SuperMassive 9200 is integrated seamlessl...

36 | Configuring NAT Mode Gateway Configuring NAT Mode Gateway This section provides an overview of a Dell SonicWALL SuperMassive 9200 appliance operating as a single network gateway in NAT mode, which is the default mode for a newly configured SuperMassive 9200. This section is relevant to administ...

Configuring a Stateful HA Pair | 37 NAT policies allow the flexibility to control Network Address Translation based on matching combinations of Source IP address, Destination IP address, and Destination Services. Policy-based NAT allows you to deploy different types of NAT simultaneously. For config...

38 | Configuring a Stateful HA Pair Initial High Availability Setup Before you begin the configuration of HA on the Primary Dell SonicWALL security appliance, perform the following tasks: • Determine which interfaces should be used as the HA Control Link and the HA Data Link. Remember, they must be ...

Configuring a Stateful HA Pair | 39 Configuring HA Monitoring Settings After configuring the HA settings, you need to configure the Monitoring settings for the LAN or WAN.This includes configuring unique IP addresses for each appliance in the Stateful HA pair. You will need to log into the appliance...

40 | Configuring a Stateful HA Pair Configuring Optional HA Settings The following settings are optional. You can configure these settings from the High Availability > Settings page. 1. To backup the firmware and settings when you upgrade the firmware version, select the Generate/Overwrite Backup...

Configuring a Stateful HA Pair | 41 HA License Configuration Overview You can configure HA license synchronization by associating two Dell SonicWALL security appliances as HA Primary and HA Secondary on MySonicWALL. You must purchase a single set of security service licenses for the HA Primary appli...

42 | Configuring a Stateful HA Pair 9. Log in to the SonicOS management interface of the Primary appliance using the unique IP address assigned on the High Availability > Monitoring page. 10. Navigate to the System > Status page and click the registration link. This allows the unit to synchron...

Configuring L2 Bridge Mode | 43 Configuring L2 Bridge Mode This section provides instructions to configure the Dell SonicWALL SuperMassive 9200 appliance in tandem with an existing Internet gateway device. This section is relevant to users following deployment Scenario C . See the following sections...

44 | Configuring L2 Bridge Mode Configuring the Secondary Bridge Interface 1. Navigate to the Network > Interfaces page from the navigation panel. 2. Click the Configure icon in the right column of the X0 (LAN) interface. 3. In the IP Assignment drop-down, select Layer 2 Bridged Mode . 4. In the ...

45 Support and Training Options In this Section: This section provides overviews of customer support and training options for the Dell SonicWALL SuperMassive 9200. • Customer Support, page 46 • Knowledge Portal, page 46 • User Forums, page 47 • Training, page 47 • Related Documentation, page 48 • Ad...

46 | Customer Support Customer Support Designed for customers with Dell SonicWALL SuperMassive solutions, Dell SonicWALL SuperMassive Support 24x7 delivers the enterprise-class support features and quality of service that enterprise companies require to keep their networks running smoothly and effic...

48 | Related Documentation Related Documentation See the following related documents for more information: • Dell SonicWALL SonicOS Administrator’s Guide • Dell SonicWALL SonicOS Release Notes • Dell SonicWALL Feature Modules • Application Intelligence and Control• Application Bandwidth Management •...

Additionally Supported Languages | 49 ロ ー カ ラ イ ズ版 フ ァ ームウ ェ ア お よ び ド キ ュ メン ト に つ い て Dell SonicWALL 導入ガ イ ド 、 ク イ ッ ク ス タ ー ト ガ イ ド 、 ユーザ ガ イ ド 、 装置用 フ ァ ームウ ェ ア、 お よ び多彩な エ ン ド ユーザ ク ラ イ ア ン ト が複数の言語 で利用 で き る よ う に な り ま し た。利用可能な 日本語 ド キ ュ メ ン ト は、 http://www.sonicwall.com/ japan/documents/sup...

51 Rack Mounting Instructions In this Section: This section provides illustrated rack mounting instructions for the Dell SonicWALL SuperMassive 9200. For more information on rack mounting requirements, see Product Safety and Regulatory Information, page 57 . 6

52 | Rack Mounting Instructions Rack Mounting Instructions M4 SCREW*8 WASHERS*8 Fasten 4 screws to the rail. Assemble the Slide Rail A B A B

53 M5 SCREW*8 M5 Nut*8 Assemble the Slide Rail Fasten two-sided screws to the rail. C C

54 | Rack Mounting Instructions Assemble Inner Rail to Chassis Fasten 6 screws to attach the inner channel onto the chassis. M4 SCREW*6 D D

55 Insert Chassis to Frame Push hook down to separate. Slide inner channel into rails.

57 Product Safety and Regulatory Information In this Section: This section provides regulatory along with trademark and copyright information. • Safety and Regulatory Information, page 58 • Warranty Information, page 63 • Copyright Notice, page 63 7

58 | Safety and Regulatory Information Safety and Regulatory Information Safety Instructions The following conditions are required for proper installation:• The Dell SonicWALL appliance is designed to be mounted in a standard 19-inch rack mount cabinet. • Use the mounting hardware recommended by the...

Safety and Regulatory Information | 59 Cable Connections All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not connect these ports directly to communication wiring or other wiring that exits the building where the Dell SonicWALL is located. Sic...

60 | Safety and Regulatory Information Hinweis zur Lithiumbatterie Die in der Internet Security Appliance von Dell SonicWALL verwendete Lithiumbatterie darf nicht vom Benutzer ausgetauscht werden. Zum Austauschen der Batterie muss die Dell SonicWALL in ein von Dell SonicWALL autorisiertes Service-Ce...

Safety and Regulatory Information | 61 •當安裝及後續接觸產品背面之後，必須用工具將指旋螺釘鎖 緊。 •更換風扇部件前，請仔細閱讀，並遵循所提供的指示。 鋰電池警告 使用者不得自行更換 戴爾 SonicWALL 網際網路安全性裝置中使用的鋰電池。必須將 戴爾 SonicWALL 送回 戴爾 SonicWALL 授權 的服務中心，以更換相同的鋰電池或製造商推薦的同類型鋰電池。若因任何原因必須丟棄電池或 戴爾 SonicWALL 網際網路安 全性裝置，請嚴格遵守電池製造商的指示。 纜線連結 所有乙太網路與 RS232 ( 主控台 ) 線路都是為與其他裝置進行內...

62 | Safety and Regulatory Information VCCI Statement この装置は、クラスＡ情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。　　　　　　 VCCI - A Canadian Radio Frequency Emissions Statement This Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe ...

Warranty Information | 63 Warranty Information All Dell SonicWALL appliances come with a 1-year Limited Hardware Warranty which provides delivery of critical replacement parts for defective parts under warranty. In addition, for 90 days from the warranty start date, Dell SonicWALL appliances are ent...