Dell 4691624 - Manuals

Product Features The Dell Professional P2012H flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD). The monitor features include: ■ 20 -inch (50.80 cm) viewable area display (Measured diagonally), 1600 x 900 resolution, plus full-screen support for lower ...

Identifying Parts and Controls Front View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power (with power light indicator) Back View

Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA Plate) Wall mount monitor using VESA -compatible wall mount kit (100 mm x 100 mm) . 2 Regulatory label Lists the regulatory approvals. 3 Stand release button Release stand from ...

Left view Right view Bottom View Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable. 2 DC power connector for Dell Soundbar Connect the power cord for the soundbar (optional). 3 DVI connector Connect your computer DVI cable. 4 VGA conne...

6 Stand lock feature To lock the stand to the monitor using M3 x 6mm machine screw (screw not provided). Monitor Specifications Flat Panel Specifications Screen type Active matrix - TFT LCD Panel type TN Screen dimensions 508.0 mm (20-inches viewable image size) Preset display area: 442.8 (H) X 249....

Analog: Detachable, D -Sub, 15 pins, shipped attached to the monitor Dimensions (with stand) Height (extended) 474.56 mm (18.68 inches) Height (compressed) 344.56 mm (13.57 inches) Width 478.40 mm (18.84 inches) Depth 183.34 mm (7.22 inches) Dimensions (without stand) Height 284.70 mm (11.21 inches)...

Operating 10% to 80% (non-condensing) Non-operating Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing) Altitude Operating 3,048 m (10,000 ft) max Non-operating 10,668 m (35,000 ft) max Thermal dissipation 153.55 BTU/hour (maximum) 68.25 BTU/hour (typical) Power Management Modes...

Pin Assignmentss VGA Connector Pin Number 15 -pin Side of the Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H -sync 14 V -sync 15 DDC clock DVI Connector

23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configur...

USB Downstream Connector Pin Number 4-Pin Side of the Signal Cable 1 VCC 2 DMD 3 DPD 4 GND USB Ports 1 upstream - back 4 downstream - 2 on back; 2 on left side NOTE: USB 2.0 functionality requires a USB 2.0-capable computer NOTE: The monitor's USB interface works only when the monitor is on or in po...

Back to Contents Page Setting Up the Monitor Dell™ P2012H Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached when the monitor i...

Connecting the blue VGA cable CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary. Connecting the USB cable After you have completed connecting the DVI/VGA/DP cable, follow the procedure below to connect the USB cable to the computer and complete ...

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above. Attaching the Soundbar (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The So...

Back to Contents Page Operating the Monitor Dell™ P2012H Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On -Screen Display (OSD) Menu PowerNap with Enhanced Menu Rotation Software Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and ...

Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1. Push the button to launch the ...

OSD Warning Messages When Dynamic Contrast Feature is enabled (in these modes: Game and Movie), the manual brightness adjustment is disabled. When the monitor does not support a particular resolution mode you will see the following message: This means that the monitor cannot synchronize with the sig...

If you press any button other than the power button one of the following messages will appear depending on the selected input: VGA/DVI -D input If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears. or See Solving Probl...

NOTE: After installation, one desktop shortcut and one shortcut under "Start" for PowerNap are created. OS support: Windows XP32, XP64, Vista32, Vista64, Win 7. Output interface support: VGA and DVI. The latest version of the PowerNap Software can be downloaded from Dell’s website. This will...

1. Attach mechanism 2. Headphone jacks 3. Power indicator 4. Power/Volume control Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt, Swivel...

Rotating the Monitor Before you rotate the monitor, your monitor should be fully vertically extended ( Vertical Extension ) and fully tilted ( Tilt ) up to avoid hitting the bottom edge of the monitor. NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell compute...

NOTE: When in Portrait View Mode , you may experience performance degradation in graphic-intensive applications (3D Gaming etc.) Adjusting the Rotation Display Settings of Your System After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Setting...

Back to Contents Page Troubleshooting Dell™ P2012H Flat Panel Monitor User's Guide Self-Test Built -in Diagnostics Common Problems Product Specific Problems Universal Serial Bus Specific Problems Dell Soundbar Problems WARNING: Before you begin any of the procedures in this section, follow the Safet...

To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode. 3. Press and hold the Button 1 and Button 4 on the front panel s...

Check for bent or broken pins in the video cable connector. Run the built-in diagnostics. NOTE: When using DVI-D input, the Pixel Clock and Phase adjustments are not available. Synchronization Problems Screen is scrambled or appears torn Reset the monitor to Factory Settings. Perform Auto Adjust via...

Back to Contents Page Appendix Dell™ P2012H Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation m...

Back to Contents Page Setting Up Your Monitor Dell™ P2012H Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers...

Back to Contents Page Setting Up Your Monitor Dell™ P2012H Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card In Windows XP: 1. Right-click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced . 4. Identify your graphics controller...