Dell 4100MP- Manuals

International Access Code:011 Country Code:1 AutoTech (portable and desktop computers)   toll free: 1-800-247-9362 Projectors Technical Support   toll free: 1-877-459-7298 Customer Service   toll free: 1-800-624-9897 Dell Sales   toll free: 1-800-289-3355 or toll free: 1-800-879-3355 Dell Outlet Sto...

Back to Contents Page Installation: Dell™ 4100MP Projector User's Guide Connecting the Projector Powering On/Off the Projector Adjusting the Projected Image Changing the Lamp Installing the Card Reader (User purchasing option) Connecting the Projector A. To Computer: There are two possible methods o...

1a) Connection with PC: 1 Power cord 2 RS232 cable     1b) Connection with Commercial RS232 control box: 1 Power cord 2 RS232 cable 3 Commercial RS232 control box Note: RS232 cable not provided by Dell. Consult professional installer for cable and RS232 remote control software. Refer to RS232 pin as...

1 Power button 2 Lens cap Powering Off the Projector DO NOT UNPLUG THE PROJECTOR BEFORE PROPERLY SHUTTING DOWN USING THE FOLLOWING STEPS. l Regular powering off procedures 1. Press the power button to turn off the projector. The "Power Off the Lamp?" message appears on the OSD. 2. Press the ...

      Screen (Diagonal) Max. 29.3" (74.4cm) 82.9" (210.6cm) 134.1" (340.6cm) 187.7" (476.8cm) 238.9" (606.8cm) 292.5" (743.0cm) M i n . 24.4" (62.0cm) 69.1" (175.5cm) 111.7" (283.7cm) 156.4" (397.3cm) 199.1" (505.7cm) 243.8" (619.3cm) Screen Size Max. ...

  Installing the Plug and Play Memory Card Reader Module (Module sold separately) To purchase the plug and play-memory card reader module for Dell projectors, please visit the Dell website at http://www.Dell.com/projectors for purchasing information. l Card Reader Installing Procedures 1. Read the Q...

Back to Contents Page Regulatory Notices: Dell™ 4100MP Projector User's Guide Federal Communications Commission (FCC) Notice (U.S. Only) FCC Declaration of Conformity CE Declaration of Conformity for a Class B Digital Device Canadian Regulatory Information (Canada Only) EN 55022 Compliance (Czech Re...

  Hsinchu, December 01, 2003 Mr. Vincent Lin   CE Declaration of Conformity for a Class B Digital Device Directives to which conformity is declared: EMC Directives 89/336/EEC and Amending Directive 92/31/EEC And Low Voltage Directive 73/23/EEC Standards to which conformity is declared EN55022: 1998+...

    VCCI Class 2 Notice (Japan Only) This equipment complies with the limits for a Class 2 digital device (devices used in or adjacent to a residential environment) and conforms to the standards for information technology equipment that are set by the Voluntary Control Council for Interference for p...

  NOM Information (Mexico Only) The following information is provided on the device(s) described in this document in compliance with the requirements of the official Mexican standards (NOM)     Exporter: Dell Inc. One Dell Way Round Rock, TX 78682 Importer: Dell Computer de México,  Paseo de la Refo...

Back to Contents Page Safety Instructions: Dell™ 4100MP Projector User's Guide CAUTION Use the following safety guidelines to help protect your projector from potential damage and to ensure your own personal safety: l To reduce the risk of fire from the intense light emitted by the lens, do not put ...

Back to Contents Page Specifications: Dell™ 4100MP Projector User's Guide Light Valve Single- chip DLP™ DDR (double data rate) technology Brightness 2200 Max. ANSI Lumens Contrast Ratio 2000:1 Typical (Full On/Full Off) Uniformity 70% Typical (Japan Standard) Lamp 250-watt user-replaceable UHP 1500-...

IMAC DV 1280X1024 85 91.1 - - * Compressed computer image. Back to Contents Page http://www.pureglare.com.au

Back to Contents Page Troubleshooting: Dell™ 4100MP Projector User's Guide No image appears on the screen Partial, scrolling, or incorrectly displayed image The screen does not display your presentation Image is unstable or flickering Image has vertical flickering bar Image color is not correct Imag...

l If your graphic card output signal is "Sync on Green", and you would like to display VGA at 60Hz signal, please go into "OSD--> Management --> Signal Type" and select "RGB". l Run "Self-diagnostic test" (see " Self-diagnostic for video ") for prelimina...