Dell 2200F- Manuals

4-6 System Administrator’s Guide Figure 4-1. Primary Paths and Failover Paths In Figure 4-1, Server 1 has two adapters, A and B. Server 2 has two adapters, C and D. The PowerVault 530F has four ports, 1, 2, 3 and 4. Ports 1 and 3 make up one virtual target with the Node Name X. Ports 2 and 4 make up...

support.dell.com Setting Up Host Servers 4-7 Setting Up Primary Failover Paths on a Host Server NOTE: When using the QLogic Fibre Channel Configuration Utility for the first time, be sure the host server is connected to the PowerVault 530F, and LUNs have NOT been assigned. 1. After booting the host ...

4-8 System Administrator’s Guide Registering Host Servers When the dellsanreg.exe — a run-once utility — is run on a host, it sends the PowerVault 530F specific host configuration settings and operating system parame-ters. The PowerVault 530F will ensure that all hosts are running the correct operat...

1-2 QLA2xxx User’s Guide Mixed Peripheral Support Simultaneous mixed-peripheral configurations and bootable device support for FC devices that meet the following standards: • Fibre Channel – Private Loop Direct Attach Technical Report (FC-PLDA) • Fibre Channel – Fabric Loop Attachment Technical Repo...

Hardware Installation 2-1 C H A P T E R 2 Hardware Installation Preinstallation Procedures Before installing your QLA2 xxx board, take a moment to read this guide. CAUTION: The QLA2xxx board contains parts that can be damaged by Electrostatic Dis-charge (ESD). Before handling the QLA2xxx board, use ...

2-2 QLA2xxx User’s Guide Power Supply The QLA2 xxx board supplies +5 volts to pin 7 of the HSSDC copper interface to support an external media interface adapter (MIA). Installation in the Computer NOTE: Due to multiple system configurations, these instructions provide a general description of the in...

Fast!UTIL A-1 A P P E N D I X A Fast! UTIL Introduction This appendix provides detailed configuration information for advanced users who want to custom-ize the configuration of the QLA2 xxx board and the connected devices. The board can be configured using Fast! UTIL. Access Fast! UTIL by pressing &...

A-2 QLA2xxx User’s Guide • Host Adapter BIOS. When this setting is disabled, the ROM BIOS on the QLA2 xxx board is disabled, freeing space in upper memory. Do not disable this setting if you are booting from an FC disk drive attached to the QLA2 xxx board. The default is Disabled . • Frame Size. Thi...

Specifications B-1 A P P E N D I X B Specifications Table B-1. QLA2xxx Board Operating Environment Environment Minimum Maximum Operating temperature 0 ° C/32 ° F 55 ° C/131 ° F Storage temperature -20 ° C/-4 ° F 70 ° C/158 ° F Relative humidity (noncondensing) 10% 90% Storage humidity (noncondensing...

Regulatory Notices C-1 A P P E N D I X C Regulatory Notices Electromagnetic Interference (EMI) is any signal or emission, radiated in free space or conducted along power or signal leads, that endangers the functioning of a radio navigation or other safety ser-vice or seriously degrades, obstructs, o...

C-2 QLA2xxx User’s Guide A Notice About Shielded Signal Cables: Use only shielded cables for connecting peripherals to any Dell device to reduce the possibility of interference with radio communications services. Using shielded cables ensures that you maintain the appropriate EMC classification for ...

Regulatory Notices C-3 Class B This equipment has been tested and found to comply with the limits for a Class B digital device pur-suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ...

C-4 QLA2xxx User’s Guide IC Notice (Canada Only) Most Dell computer systems (and other Dell digital apparatus) are classified by the Industry Canada (IC) Interference-Causing Equipment Standard #3 (ICES-003) as Class B digital devices. To deter-mine which classification (Class A or B) applies to you...

Regulatory Notices C-5 Do not dispose of the battery along with household waste. Contact your local waste disposal agency for the address of the nearest battery deposit site. NOTE: Your system may also include circuit cards or other components that contain batteries. These batteries must also be dis...

C-6 QLA2xxx User’s Guide Figure C-1. VCCI Class A ITE Regulatory Mark Class B ITE This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If this equipment is used near a radio or television receiver in a domestic...

Regulatory Notices C-7 Class A Device Please note that this device has been approved for business purposes with regard to electromagnetic interference. If you find that this device is not suitable for your use, you may exchange it for a non-business device. Figure C-3. MOC Class A Regulatory Mark Cl...

C-8 QLA2xxx User’s Guide To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark “B” confirms that the equipment is in compliance with the protection usage require...

Regulatory Notices C-9 NOM Information (Mexico Only) The following information is provided on the device(s) described in this document in compliance with the requirements of the official Mexican standards (NOM): Información para NOM (únicamente para México) La información siguiente se proporciona en...

Warranty, Return Policy, and Year 2000 Statement of Compliance D-1 A P P E N D I X D Warranty, Return Policy, and Year 2000 Statement of Compliance Limited Three-Year Warranty (U.S. Only) Dell Computer Corporation (“Dell”) manufactures its hardware products from parts and components that are new or ...

D-2 QLA2xxx User’s Guide NOTE: Before you ship the product(s) to Dell, back up the data on the hard-disk drive(s) and any other storage device(s) in the product(s). Remove any removable media, such as diskettes, CDs, or PC Cards. Dell does not accept liability for lost data or software. Dell owns al...

D-6 QLA2xxx User’s Guide Intel ® Warranty Statement (U.S. and Canada Only)

D-8 QLA2xxx User’s Guide under this warranty for NSTL logo hardware, customers must contact Dell prior to January 1, 2001. To make a claim, write to: Dell Computer CorporationP.O. Box 149258Austin, Texas 78714-9258Attention: Year 2000 Despite a system's ability to pass the YMARK2000 test, actual rol...