Dell 2007FP- Manuals

Screen dimensions 20.1 inches (20.1-inch viewable image size) Preset display area: Horizontal 408 mm (16.1 inches) Vertical 306 mm (12.1 inches) Pixel pitch 0.255 mm Viewing angle +/- 89° (vertical) typ, +/ - 89° (horizontal) typ Luminance output 300 cd/m ² (typ) Contrast ratio 800:1 (typ) Faceplate...

Power Management Modes If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the c...

   USB Downstream Connector    USB Ports l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side   Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data ...

Back to Contents Page Appendix Dell™ 2007FP Flat Panel Monitor     FCC Identification Information    Safety Instructions    Contacting Dell FCC Identification Information FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance w...

l Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. l To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case. l Never use your monitor if the power cable has been damaged. Ensu...

Back to Contents Page Rotating Your  Monitor   Dell™ 2007FP Flat Panel Monitor     Changing the Rotation of Your Monitor    Rotating Your Operating System   Changing the Rotation of Your Monitor Before you rotate the monitor, your monitor should be fully vertically extended ( Vertical Extension ) an...

Back to Contents Page Setting Up Your Monitor Dell™ 2007FP Flat Panel Monitor     Connecting Your Monitor    Using the Front Panel Buttons    Using the OSD    Setting the Optimal Resolution    Using the Dell™ Soundbar (Optional)   Connecting Your Monitor CAUTION: Before you begin any of the procedur...

  To connect your monitor to the computer perform the following steps/instructions. l Turn off your computer and disconnect the power cable.  l Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do n...

  Using the OSD   Accessing the Menu System    1.        Push the MENU button to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input O r Main Menu for non Analog (non VGA) Input 2.        Push the and buttons to move between the setting options. As you move from one icon ...

  OSD Warning Messages              Back Mode When selected PIP PIP Source PIP Position PIP Size PIP Contrast PIP Hue/Tint PIP Saturation Exit Menu input)            or       NOTE: When using DVI source, the contrast adjustment is not available. Push   to select Back to go back to the main menu. The...

Setting the Optimal Resolution 1. Right-click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1600 x 1200. 4. Click OK . If you do not see 1600 x 1200 as an option, you may need to update your graphics driver. Depending on your computer, complete on...

Back to Contents Page Solving Problems Dell™ 2007FP Flat Panel Monitor     Monitor Specific Troubleshooting    Common Problems    Video Problems    Product Specific Problems    Universal Serial Bus (USB) Specific Problems    Dell™ Soundbar (Optional) Troubleshooting     Monitor Specific Troubleshoot...

    Video Problems   Missing Pixels LCD screen has s p o t s l Cycle power on-off l These are pixels that are permanently off and is a natural defect that occurs in LCD technology Stuck-on Pixels LCD screen has bright spots l Cycle power on-off l These are pixels that are permanently on and is a nat...

Back to Contents Page Using Your Adjustable Monitor Stand Dell™ 2007FP  Flat Panel Monitor     Attaching the Stand    Organizing Your Cables    Using the Tilt, Swivel and Vertical Extension    Removing the Stand    Attaching the Stand 1. Place the st a n d on a flat surface. 2. Fit the groove on the...

  Vertical Extension Stand extends vertically up to 130mm via the Lock down / release button.                   Removing the Stand   After placing the monitor panel on a soft cloth or cushion, press and hold the Monitor Lock / Release Button, and then remove the stand. NOTE: Stand is detached and ex...