Datalogic 1100I OEM - Manuals

Introduction Unpacking the Scanner The scanner is shipped in custom packaging. Carefully open the package, and inspect for the following: • scanner • power supply (if ordered) • interface cable (if ordered) If any parts are damaged or you need additional hardware, please contact Technical Support . ...

Section 2 Mounting the Scanner This section describes how to design the mounting for optimum scanner performance. General Considerations A typical system uses the scanner mounted inside a host enclosure, with an opening for the scanning pattern to exit and read bar codes. The opening should be the s...

Mounting the Scanner Cable Routing The mounting design should also take into consideration the clearances needed for the interface cable. This cable should be routed internal to the host enclosure as much as possible. It is recommended to use a flat cable or round cable without a large strain relief...

Design of the Scanner Opening Second, the scanner must be positioned so that the scan volume and illumination light will cover the entire bar code. The scan volume is shown in Figure 2-2 . The combina­ tion of the Scan Volume and the illumination light is called the Field of View. Design­ing around ...

Mounting the Scanner Integrating the Scanner Behind a Window It is not recommended to place any type of additional window between the scanner and the bar code to be read. The addition of a host enclosure window will significantly degrade scanner performance. This is due to the additional optical ref...

Appendix A Technical Specifications Optical and Read Performance Parameters Parameter Specification Scan Volume 1147 cm 3 / 70 in 3 Scan Pattern 136 scan lines Scan Rate 1760 Digital Scan Lines/second Minimum Resolution 5 mil Depth of Field (100% UPC Labels) Code Size Depth of Field 5 mil 25.4 - 57....

Technical Specifications Environmental Parameters Parameter Specification Mechanical Shock Multi 1.0m drops Contaminants Water and Dust IP52 Temperature Ranges: Operating Storage 32  F to +122  F (0  C to +50  C) -104  F to +158  F (-40  C to + 70  C) Ambient Light Indoor 0 - 6000 lux Ambien...

Appendix B Mechanical Specifications Physical Properties Parameter Specification Dimensions 86.4 mm x 71.1 mm x 66.0 mm ( 3.4” x 2.8” x 2.6”) Weight ~ 198 g / 7.0 oz. Scanner Dimensions Integration Manual B-1

Mechanical Specifications Clearance Required for Integration Magellan ® 1100i OEM B-2