Cub Cadet 759-04080 - Manuals

2 • Remove the dash panel insert by removing the two screws and lifting the insert out (See Figure 2). • Locate the unused dash harness connector (with green(2), green w/white, red w/black, yellow w/black, and violet wires) inside the dash panel. Liftthe connector up through the hole in the dash pan...

3 Figure 6 • Slide the lock washer (Ref.7) onto the special screw, then thread the hex jam nut (Ref.4) onto thescrew. Refer to Figure 6. NOTE: Because of limited space between the ped- al shaft plate and frame, it may be easier to installthe hex jam nut from the underside of the tractor. • Fully tig...

4 Setting The Cruise Control WARNING: Always use extreme cautionwhen operating the tractor with thecruise control engaged. Use good judge-ment and maintain a safe speed for theconditions of operation. NOTE: The cruise control feature can only be operat- ed in the forward direction. • Slowly depress ...

2 • Remove the dash panel insert by removing the two screws and lifting the insert out (See Figure 2). • Locate the unused dash harness connector (with green(2), green w/white, red w/black, yellow w/black, and violet wires) inside the dash panel. Liftthe connector up through the hole in the dash pan...

3 Figure 6 • Slide the lock washer (Ref.7) onto the special screw, then thread the hex jam nut (Ref.4) onto thescrew. Refer to Figure 6. NOTE: Because of limited space between the ped- al shaft plate and frame, it may be easier to installthe hex jam nut from the underside of the tractor. • Fully tig...

4 Setting The Cruise Control WARNING: Always use extreme cautionwhen operating the tractor with thecruise control engaged. Use good judge-ment and maintain a safe speed for theconditions of operation. NOTE: The cruise control feature can only be operat- ed in the forward direction. • Slowly depress ...