Page 2 - PRECAUTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilat...
Page 3 - SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS Read Instructions: All the safety and operating instructions should be read before the product is operated.Retain Instructions: The safety and operating instructions should be retained for future refer - ence.Heed Warnings: All warnings on the product and in the operating instruc...
Page 6 - TABLE OF CONTENTS
TABLE OF CONTENTS PRECAUTIONS.................................................................................................................................. 2 SAFETY.INSTRUCTIONS.................................................................................................................... 3 ...
Page 7 - PACKAGE CONTENTS
PACKAGE CONTENTS Please make sure the following items are included with your LCD TV/monitor. If any items are missing, contact your local dealer. TF-TV1901Remote ControlAV CableAC Power Cord 1.2.3.4. 2 3 4
Page 8 - LOCATION OF CONTROLS
LOCATION OF CONTROLS 4 2 1 5678 10 9 11 3 17 16 15 14 13 12 Front View TFT LCD DisplayStereo SpeakersRemote SensorPower Indicator Right Panel View Volume Up ButtonVolume Down ButtonChannel Up ButtonChannel Down ButtonMenu ButtonMode/Enter ButtonPower Button 1.2.3.4. 5.6.7.8.9.10.11. Rear Panel View ...
Page 10 - GETTING STARTED
10 Cable Connections Do not connect the power until the first 3 connections have been made. Connect TV RF sources to the coaxial TV antenna jack. TV RF sources may include: Over- the-Air receiving antennas or cable lines. You can use a 75 ohm coaxial cable to connect an outdoor antenna.Connect Audio...
Page 12 - TV FUNCTION
12 TV FUNCTION Basic Operation Prepare the antenna and power connections (see the Getting Started section for details).Press POWER to turn the TV on.Press MODE to set the TV to “TV MODE”. You should see the antenna signal on-screen.Press CH+/CH- to change the channel. TV Setup Menu The TV setup menu...
Page 17 - AV FUNCTION
17 AV FUNCTION Basic Operation Prepare the AV Input and power connections (see the Getting Started section for details).Press POWER to turn the TV on.Press MODE to set the TV to the mode that corresponds with the Video Input jack that is in use (i.e., Video, S-Video, or Component Video (Y-Cb/Pb-Cr/P...
Page 19 - TROUBLESHOOTING
19 TROUBLESHOOTING If you have a problem with this TV, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. There is no power t...
Page 21 - SPECIFICATIONS
21 SPECIFICATIONS Display Type 19” TFT LCD Display Resolution 1280 x 1024 Display Pixel Pitch 0.264mm Display Contrast 500:1 Display Brightness 250 cd/m 2 TV System NTSC-M TV Tuning system FS with PLL VHF-L: 55.25MHZ ~ 83.25 MHZ VHF-H: 175.25 MHZ ~ 211.25 MHZ UHF: 471.25 ~ 801.25 MHZ Power Supply AC...
Page 22 - NOTES