Clifford concept 50x - Manuals

Page 3 - Table of Contents

Table of Contents Standard Features of the Concept 50x . . . . . . . . . . . . . . . . . . . . . . . 2 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . . . . . . . . 6 How to use your keychain remote control . . . . . . . . . . . . . . . . . . . . . . . 6What each button/channel ...

Page 4 - Standard Features of the Concept 50x; Lifetime Warranty; NEVER; UltraSecure Coded Valet ModeTM; Remote Controlled Valet Mode Entry and Exit; — With just a press of a button on; Failure-Proof Driving Safety; — Even in the unlikely event of a system

Standard Features of the Concept 50x ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (seewarranty card for full details). ✔ FACT — False Alarm Control and Test — One of many patented Clifford innovations, F...

Page 5 - Remotely Adjustable Dual-Zone Proximity Sensor; — Two sensor zones; Dual-Mode “Chirp” Silencing; —Whenever you wish, just a press on the; Remote Door Locking/Unlocking with Built-in Relays; — No more fumbling; User-Selectable AutoLock; — Automatically locks the doors the instant you turn; User-Selectable AutoUnLock; — Automatically unlocks the doors when you turn; Smart Self-Powered Siren with Unbreachable Digital ComLink; Personalized Siren Sounds:; You may select any combination of 6 different; Automatic Low Battery Warning:; If at any time the siren’s back-up battery; Smart Remote Trunk Release Capability; — Assures the optional remote

Standard Features of the Concept 50x (cont.) ✔ Remotely Adjustable Dual-Zone Proximity Sensor — Two sensor zones provide full protection: If someone is lurking near your car, the system willsound a warning tone. But if a thief actually leans into the passengercompartment, the system will instantly b...

Page 6 - AutoArming Enable/Disable

Standard Features of the Concept 50x (cont.) ✔ Remote Window/Sunroof Closure Capability — On certain vehicles (including several models of Mercedes Benz, Jaguar, Volkswagen andBMW), the system’s integrated timer and an optional relay can be used toautomatically close the power windows and sunroof ev...

Page 7 - Patented Smart AutoTesting

Standard Features of the Concept 50x (cont.) ✔ Patented Smart AutoTesting — Automatically tests all system triggers and sensors every time you remotely arm and warns you if you accidentallyarm your Concept 50x system with the hood or trunk open. If there is agenuine trigger or sensor malfunction, th...

Page 8 - How to use your keychain remote control; Press the LevelShift button once. This

Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radiotransmitters powered by a tiny 12-volt battery. Range is up to 30 meters. A weakremote control battery will reduce range. Electrical interference and even sunspotscan interrupt the...

Page 9 - AND

What each button/channel does Your Concept 50x remote controls come pre-programmed so that certain channelscommand certain functions. If you wish, you can actually assign any channel to anyfunction (see pages 16-20). The following chart indicates what each remote controlchannel number does, and how ...

Page 10 - Smart prior intrusion attempt alert

TO SILENTLYARM OR DISARMTHE SYSTEM . . . . . . . Press button 3 (channel 3). Your Concept 50x system will arm ordisarm with all the indications noted above except for the chirpacknowledgments. TO REMOTELY TURN ON A TIMEDACCESSORY . . . . . . Button 2 (channel 2) controls an electronic interlock that...

Page 11 - How to interpret the chirps and indicator light flashes; Chirps and flashes; How to interpret the LED status indicator; LED Condition; AutoArming; Visual acknowledgment:; Five seconds after you exit the vehicle and close all; Instant AutoArming bypass:; Prevents AutoArming when fueling the vehicle

How to interpret the chirps and indicator light flashes When you use the remote, the system responds with chirps and indicator light flashes: Chirps and flashes Meaning 1 Your system is disarmed 2 Your system is armed 2 and then 4 Armed but there is a door open or the sensor is malfunctioning (see S...

Page 12 - UltraSecureTM Coded Valet Mode; Your factory-set valet code is the single digit “2.”; Definitions; A digit is defined as any number from 1 to 9, inclusive.; To enable valet mode

UltraSecure™ Coded Valet Mode In seconds, thieves can disable all other alarm brands by hotwiring the ignition andflicking an easy to find “hidden” valet switch. Your system has safeguards thatabsolutely ensure a thief cannot enable the valet mode as a way of “turning off” yoursystem. How? To enable...

Page 13 - To exit valet mode; system is now in its normal operating mode.; Setting your own secret valet code; Example; the “set a new secret valet code” feature is in column 3, row 6.; Keyless entry in valet mode

To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine.2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept Series systems have the ...

Page 14 - momentary side of the switch until you hear a siren chirp.; To test the current sensitivity setting:

Remote controlled valet mode entry and exit You can even enable or exit valet mode with your remote control simply bytransmitting channel 9 (LevelShift twice, then button 1). In addition to the aboveindications, two parking light flashes will confirm that you have remotely enabledvalet mode, while a...

Page 15 - Smart AutoTesting; Specific malfunction identification:; blink cycle repeats a total of 5 times) and refer to the chart below:; Number of LED blinks between pauses; Proximity Sensor; Optional sensor; blinks; Trunk trigger; blinks; Hood trigger

Built-In Two-Point AutoImmobilizer Thirty seconds after you turn off the ignition, the system’s built-in two-pointAutoImmobilizer electronically disengages your vehicle’s starter motor andelectronic fuel pump to ensure against theft of your vehicle. The LED StatusIndicator will repeatedly flash to i...

Page 17 - Unbreachable Digital ComLink:

Smart Self-Powered Siren with Unbreachable Digital ComLink This siren has its own built-in back-up battery, so even if a thief cuts all the wires,the siren will continue to wail. Furthermore, this unique Clifford-designed andmanufactured siren has all these important additional enhancements: Unbreac...

Page 18 - User-selectable features; NOTE

User-selectable features Your Concept 50x allows you to set many of its features to your own personalpreferences. Although the system’s capabilities are extensive, we made the programmingprocedures very simple: to make a change, you just flick the PlainView switch a fewtimes. Once you’ve changed a f...

Page 19 - Turn on AutoArm & Lock; off

EXAMPLE 1: Turn on AutoArm & Lock When the system AutoArms (see page 9), it does not normally lock the doors to ensurethat you cannot accidentally lock the keys inside the vehicle. To enable this feature,you’ll note that “AutoArm & Lock” is in column 3, row 2 of the table on pages 19-20.The ...

Page 21 - Feature Select; this feature is for installers only; Immediately flip the switch to its latched position, then:

Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Column 4 4th latched Row 1 1st momentary Add new remote to channel 1 info on page 9 NOTE 1 AutoLock on/off info on page 12 AutoArming: on/off info on page ...