Clifford IntelliPage System Car Alarm - Manual

Table of Contents:

• Page 3 – WARNING; • NEVER allow children access to the remote controls.
• Page 4 – Table of Contents
• Page 5 – What to do if your vehicle is stolen: the
• Page 6 – More than 10,000-Mile Remote Control Range; Remote Engine Starting
• Page 8 – — Additional Remote Engine Starting Features; AutoStartTM Features; — With a press on the remote control, you may command the system; — With a press on the remote, you may set IntelliPage to; — Remote Controlled Features —; NEVER
• Page 9 – — Remote Controlled Features
• Page 10 – A Pair of Remotely Adjustable Dual-Zone Sensors; — The most common; — The two sensor zones provide full; — Just like the Digital Dual-Zone Proximity Sensor IV,; — For the utmost in sensitivity; — One press of a button on the; — If your vehicle can close the
• Page 11 – Smart Remote Trunk Release Capability; — Unmatched Security, Safety & Convenience Features —; UltraSecure Coded Valet ModeTM
• Page 12 – — Additional Security and Convenience Features; User-Selectable AutoLockTM with Smart ReLockingTM; — Automatically locks; User-Selectable AutoUnLock; — Automatically unlocks the doors when the; User-Selectable NightVisionTM Headlight Automation; — All electronics for; — You’ll never again accidentally drive in the dark without; — The headlights are turned on or off only when necessary.; — For your safety when; — The NightVision circuitry enhances headlight; — When the windshield wipers are turned on, the IntelliPage; — After you park and turn off the ignition, the
• Page 13 – Smart Self-Powered Siren with Unbreachable Digital ComLinkTM; — Automatically arms itself
• Page 15 – Advanced CMOS Microcomputers
• Page 17 – Press the LevelShift button twice. This shifts
• Page 18 – remotely enter or exit valet mode (see page 19)
• Page 20 – How to interpret the chirps and parking light flashes; Chirps and/or flashes
• Page 21 – If you prefer, you may deactivate or reactivate the; Five seconds after you exit the vehicle and close all the; Prevents AutoArming when fueling the vehicle and; UltraSecureTM Coded Valet Mode; Your secret valet code; Your factory-set valet code is the single digit “2.”
• Page 22 – Definitions; Remote controlled valet mode entry and exit
• Page 23 – Setting your own secret valet code; the “set a new secret valet code” feature is in column 4, row 6.; Remote controlled seat positioning
• Page 24 – Dual sensors
• Page 25 – d. Piezo Sensor warning zone: “Thump” the top of the window pillar with; How to interpret the LED status indicator; LED Condition; Pause between flashes
• Page 27 – Smart AutoTestingTM; The system can indicate the specific trigger or; Number of LED blinks between pauses; blinks; blinks; Automatic malfunction bypass
• Page 28 – Clifford Electronics’ ingenious Digital ComLink is
• Page 29 – Adding new remote controls
• Page 30 – SmartPowerUpTM II; How to remotely start/shutdown the engine; Verify that the engine or ignition switch is not already on.; Diesel compatibility
• Page 31 – The AutoStart features
• Page 32 – ShortStop; drive the vehicle section on page 28.; Remote Starting DOs and DON’Ts; Always engage the parking brake.; DON’Ts; You must always exercise good judgment; NEVER allow children access to the remote controls.
• Page 33 – START; on the telephone keypad, then hang up. That’s it! Your pager service; Your PIN code; You must enter on the phone keypad the asterisk
• Page 34 – How to send a phone-in command; symbol to begin and
• Page 35 – new PIN code on page 30 for details.; LOCK; UNLOCK; ACC
• Page 37 – Multiple phone-in commands; would not be sent
• Page 38 – User-selectable features; NOTE
• Page 39 – on; ” in bold type indicates the factory setting. The; the momentary side until you here a chirp).
• Page 40 – Reset all features
• Page 41 – Feature Select; Immediately flip the switch to its latched position