Clifford concept 20 - Manuals

Standard Features of the Concept 20 (cont.) ✔ High-Luminescence LED Status Indicator with Automatic Battery-Saving Mode — Adds visual deterrence and identifies system status. To conserve vehicle battery power, if the system has remained continuously armed for48 hours, the flash rate will automatical...

Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radiotransmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remotecontrol battery will reduce range. Electrical interference and even sunspots can interruptthe ...

TO ACTIVATETHE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights willflash repeatedly and the siren will blare for 30 or 60 seconds(user-selectable), or until you press button 1 again to turn it off. Ifthe ignition is on (indicating you are in the car), t...

Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective andonerous car stealing device ever used by car thieves — a code-grabber. Code-grabbersare far more effective and efficient than scanning. Unlike scanners that sequ...

UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition andflicking an easy to find “hidden” valet switch. Your system has safeguards that absolutelyensure a thief cannot enable the valet mode as a way of “turning off” you...

To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine.2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept Series systems have the ...

AutoLock and AutoUnLock™ For your safety and that of your passengers, the doors automatically lock the instant youturn on the ignition (see User-selectable features on pages 20-24). When you turn theignition off, AutoUnLock automatically unlocks the doors. To suit your preferences,you may turn off e...

have factory-delayed courtesy lights). If a sensor is malfunctioning, you will receive theusual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Since this is a warning indication, you will hear the 4 chirps even if youhave the chirp muting feature turned o...

High-output Insignia™ Siren All the siren electronics are in the system control unit rather than the siren itself. Thisprotects them from heat, dirt and exposure to the elements (other alarm companies’sirens are far more susceptible to failure). Your Concept 20 also provides theseadditional features...

User-selectable features Your Concept 20 allows you to set many of its features to your own personalpreferences. Although the system’s programming capabilities are very extensive, wehave made the programming procedures very simple: to make a change, you just flickthe PlainView switch a few times. On...

c. To exit program mode, turn the ignition off (you’ll hear 3 chirps and the LED will turn off to indicate exit of program mode). If driving, just wait 60 seconds and thesystem will automatically exit program mode. EXAMPLE 1: Turn on AutoArm & Lock: You can set the system to automatically lock t...

Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Row 1 1st momentary Add new remote to channel 1 info on page 11 NOTE 1 AutoLock on/off info on page 16 Enhanced AutoArming: on/off info on page 13 Row 2 2n...