Clifford ACE 300 - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents Standard Features of the ACE 300 . . . . . . . . . . . . . . . . . . . 3 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 6 How to use your keychain remote control . . . . . . . . . . . . . . . . 6 What each button/channel does . . . . . . . . . . . . . . . . . ...

Page 3 - FACT — F

Table of Contents (cont.) Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Specific malfunction identification . . . . . . . . . . . . . . . . . . . . . 11 Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . . 11 TotalRecall™ . . . . . . . . . . . . . . . . . ...

Page 4 - Standard Features of the ACE 300; Deluxe Remote Keyless Entry in Valet Mode

Standard Features of the ACE 300 ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card forfull details). ✔ FACT™—False Alarm Control and Test — One of many patented Clifford innovations, FACT a...

Page 5 - AutoArming Enable/Disable

Standard Features of the ACE 300 (cont.) ✔ Remote Controlled Courtesy Lighting — For your personal safety and convenience, when you remotely disarm your ACE 300, the interior lights turn onand stay on until you start the engine or 30 seconds, whichever occurs first. ✔ Dual-Mode Chirp Silencing — You...

Page 7 - How to use your keychain remote control; Press the LevelShift button once. This

Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radiotransmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weakremote control battery will reduce range. Electrical interference and even sunspotscan interrupt the ...

Page 10 - Instant AutoArming bypass:; Prevents AutoArming when fueling the vehicle; To enable valet mode; is in its normal operating mode.; Remote controlled valet mode entry and exit

Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm, ACE 300 automatically armsitself 30 seconds after the doors are closed. For your convenience, if you re-open anydoor(s) within the 30-second countdown, AutoArming will restart from the beginningonce all doors are closed....

Page 11 - Meaning; Armed but the hood or trunk is ajar (see page 11)

How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps and parking lightflashes. These chirp/flash acknowledgments mean: Selectable starter/ignition interrupt At the time of installation, you can select whether your ACE 300 interrupts t...

Page 12 - Smart AutoTestingTM; Specific malfunction identification:; The system can also indicate the specific; Number of LED blinks between pauses; Piezo Sensor; blinks; Hood or trunk trigger

Smart AutoTesting™ Each time you remotely arm your ACE 300, it automatically performs an extensivetest of all system triggers and sensors. If the hood or trunk is open when youremotely arm, the system will immediately alert you of the problem by sounding 4chirps and 4 parking light flashes instead o...

Page 13 - Remote controlled chirp muting:; Remote controlled chirp muting capabilities

Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensorwas activated in your absence. When you enter the vehicle and turn on the ignition(or start the engine), the LED will blink 1–3 times, pause, then repeat the blink cycle4 more time...

Page 14 - User-selectable features; page. Note the number of flicks and chirps.

User-selectable features Your ACE 300 vehicle security system allows you to set many of its features toyour own personal preferences. We have made the programming procedures verysimple: to make a change, you just flick the valet switch a few times. The systemcomes from the factory with all of its fe...

Page 15 - Turn the ignition off. That’s all there is to it! To change the

Feature Factory setting # of flicks & chirps Secondary action Program completion confirmation Result Add a new remote to channel 3 (silent arm/disarm) — 15 Press remote control button 3 3 chirps Button 3/channel 3 code of the new remote control has been memorized Add a new remote to channel 4 (o...