Clifford 420.4X - Manuals - manualsarea.com

Page 2 - Congratulations; What you get

Congratulations Congratulations on the purchase of your state-of-the-art remote start and keyless entry system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit the below website: http:// www.clif...

Page 3 - Important information; Government Regulations and Safety information; Your Warranty; Replacement remote controls

Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result ...

Page 4 - Contents

Contents Getting Started .................................................................................................... 3 Keys to using this manual ...................................................................... 3 Remote Control Information .................................................

Page 6 - Getting Started; Keys to using this manual

3 © 2011 Directed Electronics. All rights reserved. Getting Started Keys to using this manual Speciﬁc actions (in bold type) and style conventions are used consis-tently throughout this manual, they are as follows: s Press: implies pushing in and releasing a button. s Hold: is used after Press actio...

Page 7 - Remote Control Information

4 © 2011 Directed Electronics. All rights reserved. Remote Control Information Transmit LED Internal Antenna Ghost LED’s Command Buttons Function Button AUX Feature Description Internal Antenna Used for transmitting and receiving*information Command buttons (4) Used to perform locking, unlocking, au...

Page 8 - Control Center

5 © 2011 Directed Electronics. All rights reserved. Control Center Control button Status LED Antenn The Control Center, typically located on the upper part of the front windshield. It consists of: s The In-vehicle system antenna. s The Status LED, as a visual indicator of the system’s status. s The ...

Page 9 - Using your System; Commanding the system

6 © 2011 Directed Electronics. All rights reserved. Using your System Commanding the system Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used keyless entry and remote start features w...

Page 10 - Remote Control Command table

7 © 2011 Directed Electronics. All rights reserved. Remote Control Command table Basic Commands Advanced Commands Button Level Direct Access x 1 x 2 x 3 x 4 Lock Silent Lock Unlock Silent Unlock Valet Mode Car Finder Remote Start Reset Runtime Timer Mode Smart Start Rear Defogger AUX Trunk Release A...

Page 11 - Lock

8 © 2011 Directed Electronics. All rights reserved. Basic Commands (Direct Access) Lock Press and release , Doors lock (if connected). The horn honks once, and the parking lights ﬂsh one-time. Lock LED turns on with 1 beep. To Lock and Panic Press and hold To lock the system, then activate Panic. Fo...

Page 12 - Silent Lock; Silent Unlock

9 © 2011 Directed Electronics. All rights reserved. AUX/Trunk** Press and hold AUX . The AUX LED turns on and tones play to conﬁrm. The Trunk opens (if connected) when this button is pressed for 2 seconds. * For Manual transmission vehicles see “Manual Transmission Start (MTS mode)” on page 22 in th...

Page 13 - Runtime Reset; Temperature Request

10 © 2011 Directed Electronics. All rights reserved. Runtime Reset Press and release If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The green ghost LED’s show the runtime and the remote start On tones play to comﬁrm ru...

Page 14 - Remote Valet; Lock Status

11 © 2011 Directed Electronics. All rights reserved. Remote Valet Press and release Enters (or if On, exits) Valet Mode. The Control Center LED turns on and off accordingly, and prevents doors from locking passively. The The Unlock LED and Valet beeps play (1 for on, 2 for off) to conﬁrm. Timer Star...

Page 15 - Car finder; Runtime Remaining

12 © 2011 Directed Electronics. All rights reserved. Advanced Commands: (Level 3) Press and release the button 3 times. The transmit LED illuminates in sets of triple ﬂashes to indicate Level 3. Car ﬁnder Press and release The horn emits one long honk and the parking lights ﬂash for 10 sec-onds. The...

Page 17 - Remote Control Configuration; Remote Programming

14 © 2011 Directed Electronics. All rights reserved. Remote Control Conﬁguration The remote controls have operations that can be conﬁgured to a user’s personal preferences. The following instruction will direct you through the available conﬁguration and programing options for the remote control. Rem...

Page 18 - Remote Features

15 © 2011 Directed Electronics. All rights reserved. Prepare the remote control for pairing: 5. Enter programming by pressing and holding the button for 8 seconds to access the Main Menu. 6. Press and hold the button for 1 second, 3 transmit LED ﬂash- es indicate the remote control is ready to pair....

Page 19 - Keypad Lock

16 © 2011 Directed Electronics. All rights reserved. 1-way companion remote control The 1-way remote will ﬂash the transmit LED to indicate the setting. Feature Button Press Single Flash Double Flash Keypad Lock Auto Off * No function No function No function Car 2 Car 2 On Car 2 Off * Keypad Lock Op...

Page 20 - Remote Beep

17 © 2011 Directed Electronics. All rights reserved. Page Mode* Options: Power Save 1, Power Save 2, On, Off. The Responder LE remote monitors your system’s messages via Paging. When Paging is On the remote wakes up every few seconds to detect pages from the system. When Off the remote does not wake...

Page 21 - Emergency Override

18 © 2011 Directed Electronics. All rights reserved. Emergency Override The override feature allows you to select a speciﬁc number of presses needed to disable the system. If the override button has been programmed to a new number of presses by your authorized dealer, that number should be indicated...

Page 22 - Remote Start Features; Pit Stop Mode; Key Takeover

19 © 2011 Directed Electronics. All rights reserved. Remote Start Features Pit Stop Mode To exit vehicle with engine running The system keeps the engine running during short trips into the house or convenience store. To perform Pit Stop: 1. With the engine running, set the parking brake and release ...

Page 23 - Remote Start Safe-lock; Advanced Start

20 © 2011 Directed Electronics. All rights reserved. Remote Start Safe-lock Remote start safe-lock makes sure the doors are locked while the en-gine is running and after, even if they are unlocked when remote start is activated. Door locks may require additional parts and labor. Disabling Remote Sta...

Page 24 - Temperature Reporting; Remote Start Time-out Alert

21 © 2011 Directed Electronics. All rights reserved. by the installer (default 6 starts). Timer Start is exited after the ﬁnal start. Smart Start operation Smart Start uses the settings for Timer Start in addition to tempera-ture and battery level to automatically start the engine. Activation begins...

Page 26 - Turbo Timer Mode

23 © 2011 Directed Electronics. All rights reserved. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activa-tion button. 1. With the engine running, set the parking brake. 2. Press the optional dash moun...

Page 27 - Remote Start Faults

24 © 2011 Directed Electronics. All rights reserved. Remote Start Faults For user safety, the system must be properly conﬁgured or remote start will not activate. A Remote Start Fault may be caused by any of several conﬁguration issues. Refer to the table below for the command type and parking light...

Page 28 - Remote and System Operations

25 © 2011 Directed Electronics. All rights reserved. Remote and System Operations Passive Locking* Park and exit the vehicle, after the doors are closed the Passive locking countdown begins. The led ﬂashes quickly and upon reaching 20 sec-onds then the horn honks once. At 30 seconds the system locks...

Page 29 - Valet Mode; Power Save; Rapid Resume

26 © 2011 Directed Electronics. All rights reserved. Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the convenience features still operate normally. Use the following steps to manually ent...

Page 30 - Car Select

27 © 2011 Directed Electronics. All rights reserved. Car Select Car 2 remote control option must ﬁrst be turned On (See Remote Con- trol Conﬁguration section to turn on). 1. Press and hold the button for 3 seconds. The LED ﬂashes once or twice to indicate the selected Car is 1 or 2. 2. Release the b...

Page 31 - System Expansion Options

28 © 2011 Directed Electronics. All rights reserved. System Expansion Options Controlling two vehicles (Car Select) The Responder LE and 1-way companion remotes can control systems in two vehicles saving the need for multiple remote controls. This fea-ture also allows for customized system conﬁgurat...

Page 32 - Battery Information; Low Battery

29 © 2011 Directed Electronics. All rights reserved. Battery Information The Responder LE remote is powered by 2 batteries (PB CR-2016) and the 1-way companion remote is powered by 1 battery (CR-2032) that can be purchased at most retailers. When the battery begins to weaken, the operating range wil...

Page 33 - Battery Replacement; Battery Disposal

30 © 2011 Directed Electronics. All rights reserved. s Turn Paging off: The remote will not wake up to check for mes-sages with Paging off in the Setup Remote menu. s Turn Beeps off: The Button beeps can be turned off in the Setup Remote menu. The command beeps still play normally. Battery Replaceme...

Page 34 - Glossary of Terms

Safety 31 © 2011 Directed Electronics. All rights reserved. Glossary of Terms Document Terminology Control Module The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s func-tions. ...

Page 35 - Government Regulations

32 © 2011 Directed Electronics. All rights reserved. Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the fol-lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including ...

Page 36 - Warning! Safety First; Installation

Safety 33 © 2011 Directed Electronics. All rights reserved. Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed b...

Page 38 - Interference

35 © 2011 Directed Electronics. All rights reserved. GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER-ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME-DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZE...

Page 39 - Limited lifetime consumer warranty

36 © 2011 Directed Electronics. All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace(at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf-ter the “unit”), excluding withou...