Clarion VRX6671Z - Manuals

VRX6671z 9 RADIO mode display COLOR LCD DISPLAY INFORMATION PANEL MAIN SUB

10 VRX6671z CD/MD Changer mode display COLOR LCD DISPLAY INFORMATION PANEL SUB MAIN

VRX6671z 11 TV mode display COLOR LCD DISPLAY INFORMATION PANEL SUB MAIN

12 VRX6671z Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Inser t the AA (SUM-3, IECR-6/1.5V) batter- ies that came with the remote control unitfacing in the directions shown in the figure,then close the rear cover. Notes: U...

VRX6671z 13 Switches among Radio, CD changer, MD changer and TV. Functions of Remote Control Unit Buttons Notes:• The remote control unit does not work when the panel is closed.• Some of the corresponding buttons on the main unit and remote control unit have different functions. £ FUNC ¢ BANDDISC UP...

14 VRX6671z 6. DCP 2. Lock the DCP/Operation Panel at the upper center until a click is heard. 3. Press the power button 1 to turn on the power . CAUTION • The DCP can easily be damaged by shocks. After removing it, be careful not to drop itor subject it to strong shocks. • If the Operation Panel is...

VRX6671z 15 7. CAUTIONS ON HANDLING LCD panel/Generalities • Be sure to store the LCD panel inside themain unit when parking the car outdoors forlong period of time. The LCD panel will oper-ate properly in a temperature range of 0 to60 ° C. • Don’t allow any liquids on the set from drinks,umbrellas ...

16 VRX6671z 8. OPERATIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold). CAUTION When the unit is turned on, starting and stop-ping the engine with its volume raised to themaximum level may harm your hearings. Becarefu...

18 VRX6671z Basic Operations When the panel is closed: Each time you press the Z-EHCR button 9 , the tone effect changes in the following order : “Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜ “Z-EHCR OFF” ➜ “Z-EHCR 1”... When the panel is open: 1. Press the A-M button & to change into the AUDIO-MODE di...

VRX6671z 19 Turning on/off the loudness The loudness effect emphasizes the bass andtreble to create a natural sound tone. When youare listening to music at a low volume, it is rec-ommended to use the loudness effect. ∗ This function is enabled only when the panel isopen. 1. Press the A-M button &...

20 VRX6671z 2. Press the right or left side of SEARCH button 2 to automatically seek a station. When the right side of SEARCH button 2 is pressed, the station is sought in the directiono f h i g h e r f r e q u e n c i e s ; i f t h e l e f t s i d e o fSEARCH button 2 is pressed, the station is sou...

22 VRX6671z CD Changer Operations CD changer functions When an optional CD changer is connectedthrough the CeNET cable, this unit controls allCD changer functions. This unit can control a totalof 2 changers (MD and/or CD). Press the FUNC button 1 and select the CD changer mode to star t play. If 2 C...

24 VRX6671z MD Changer Operations MD changer functions When an optional MD changer is connectedthrough the CeNET cable, this unit controls allMD changer functions. This unit can control atotal of 2 changers (MD and/or CD). Press the FUNC button 1 and select the MD changer mode to star t play. If 2 M...

26 VRX6671z TV Operations TV functions When an optional TV tuner is connected throughthe CeNET cable, this unit controls all TV tunerfunctions. To watch TV requires a TV tuner. For your safety, the driver should not watchthe TV or operate the controls while driv-ing. Please note that watching and op...

28 VRX6671z TV Operations Adjusting the brightness and toneof color Notes:• This operation is available only when the car is stopped and the parking brake is applied. • This function is not available when the display is stored. • The HUE setting can be adjusted only when the NTSC mode is selected. 1...

VRX6671z 29 Rear Vision Camera Monitoring the rear vision camera The rear vision camera can be connected to thisunit. For the power supply of the camera, mountthe power box sold separately (CAA-147). Notes:• This function is not available when the display is stored. Operation of External VisualDevic...

30 VRX6671z Other Functions Always turning on the buttonillumination on the operation panel Note:• The following operation is enabled when the panel is open. The button illumination on the operation panelwhen the display is turned upward, can beswitched between “ON” and “OFF”. ● “ON”: Button illumin...

32 VRX6671z DSP operations DSP control function If the DSP (DPH7500z), sold separately, is con-nected to this unit using the CeNET cable, allthe functions of the DSP can be controlled. ∗ When the DSP is connected, an external ampli-fier is required. ∗ DSP control can all be operated only when thepan...

VRX6671z 33 4. After adjustment (setting), operate the JOY- STICK ¡ rightward or leftward to move the cursor to “MENU” and press the ENT at thecenter of the JOYSTICK ¡ to return to the adjustment selection display. 5. Press the ADJ button * again to return to the STANDARD display. Selecting the easy...

VRX6671z 35 8. Operate the JOYSTICK ¡ rightward or left- ward to select “MENU” and press the ENT atthe center of the JOYSTICK ¡ to change into the AUDIO-MODE display. Easy mode/DSP operations DSP effect ON/OFF ∗ The factory default setting is “ON”. 1. Press the A-M button & to show the AUDIO- MO...

VRX6671z 39 9. IN CASE OF DIFFICULTY Power does notturn on.(No sound isproduced.) Nothing happenswhen buttons arepressed. Display is notaccurate. The remotecontroller doesnot work. The image is notdisplayed. The display isdark. The color of thedisplay is light ora shade of coloris not good. When the...

VRX6671z 43 1. BEFORE STARTING..................................................43 2. PACKAGE CONTENTS...............................................43 3. GENERAL CAUTIONS................................................44 4. CAUTIONS ON INSTALLATION.................................44 5. INSTALLING T...