Clarion Model RK1 - Manuals

3 what is included z Control module z Receiver/antenna z Two four-button remotes z Blue status LED indicator light z Push-button Override switch z Shut-down toggle switch important information Congratulations on the purchase of your remote engine start keyless entry system. Due to the complexity of ...

4 FCC/ID notice This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful inter- ference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. Changes or m...

6 using your system warning! safety first The following safety warnings must be observed at all times: z Due to the complexity of this system, installation of this product must only be performed by an authorized dealer. z When properly installed, this system can start the vehicle via a com- mand sig...

8 locking Pressing for one second locks the doors (if the door locks are con- nected) and activates the starter kill. The horn will honk (if connected) and the parking lights will flash once to confirm arming of the system. While the system is locked, the status LED will flash once per second. The S...

10 override mode You can prevent your system from automatically activating the Starter Kill and locking the doors by using override mode. This is very useful when washing the vehicle or having it serviced. In override mode, the starter kill cannot be activated, even with the remote, but all conve- n...

11 remote engine start This feature allows you to remotely start and run your vehicle for a pro- grammable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling is desire...

14 3. Press and release the and buttons at the same time. 4. The lights will flash to indicate the remote engine start has entered short run turbo mode. 5. Turn off the key, the engine will keep running. 6. Exit and secure the vehicle. 7. The engine will turn off after the programmed run time. timer...

6. The system will start every 3 hours until canceled by the brake, hood, or neutral safety shut-down wires. starter anti-grind circuity Whenever the vehicle is remote engine started, advanced anti-grind cir- cuitry prevents the starter from engaging, even if the key is turned to the start position....

16 power-up This system will store its current state to non-volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. This means if the unit is in override mode and the battery is disconnected for any reason, such as servicing the car, when the bat- ...

18 glossary of terms Control Unit: The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which mon- itors your vehicle and controls all system functions. Starter Kill: An automatic switch controlled by your system which pre- vents the vehicl...

19 convenience expansions Listed below are some of the many expansion options available for use with your system. Some options may require additional parts and/or labor. Please consult with your dealer for a complete list of options available for use with this system. Domelight Supervision: The dome...

23 QUICK REFERENCE GUIDE: To lock using your remote ■ To lock the system press for one second. The doors will lock (if con- nected). The LED will begin to flash. The Starter Kill will prevent thevehicle’s starter from cranking if it has been installed. The vehicle’s horn(if connected) will honk and ...